Lightweight aluminum alloy conductor materials(Al-Mg-Si alloys)require not only high electrical conductivity to reduce electrical loss,but also high strength to withstand extreme weather conditions.To improve electric...Lightweight aluminum alloy conductor materials(Al-Mg-Si alloys)require not only high electrical conductivity to reduce electrical loss,but also high strength to withstand extreme weather conditions.To improve electrical conductivity and mechanical properties of Al-Mg-Si alloy simultaneously,the rare earth La was introduced to modify the Al-Mg-Si alloy.The effect of La addition on the microstructure,tensile properties and electrical conductivity of cast Al-Mg-Si alloy was investigated systematically.Results indicate that the appropriate La content is helpful to improve the strength and electrical conductivity of Al-Mg-Si alloys.When the addition of La is 0.2wt.%,theα-Al grains are refined apparently,Mg and Si solute atoms in the Al matrix are reduced by the formation of Mg_(2)Si phase;the distribution of Al_(11)La_(3)phases is uniform,and the morphology of AlFeSi phase transforms from continuous state to discontinuous state.The Al-Mg-Si-0.2La alloy exhibits the optimal tensile properties and electrical conductivity,with an ultimate tensile strength of 170 MPa,a yield strength of 88 MPa,an elongation of 18.9%,and an electrical conductivity of 44.0%IACS.These values represent improvements of 9.0%,15.8%,70.3%,and 17.3%,respectively,compared to the Al-Mg-Si alloy without La addition.However,excessive La deteriorates the properties of Al-Mg-Si-xLa alloys.展开更多
Blast furnace （BF） ironmaking process has complex and nonlinear dynamic characteristics. The molten iron temperature （MIT） as well as Si, P and S contents of molten iron is difficult to be directly measured online...Blast furnace （BF） ironmaking process has complex and nonlinear dynamic characteristics. The molten iron temperature （MIT） as well as Si, P and S contents of molten iron is difficult to be directly measured online, and large-time delay exists in offline analysis through laboratory sampling. A nonlinear multivariate intelligent modeling method was proposed for molten iron quality （MIQ） based on principal component analysis （PCA） and dynamic ge- netic neural network. The modeling method used the practical data processed by PCA dimension reduction as inputs of the dynamic artificial neural network （ANN）. A dynamic feedback link was introduced to produce a dynamic neu- ral network on the basis of traditional back propagation ANN. The proposed model improved the dynamic adaptabili- ty of networks and solved the strong fluctuation and resistance problem in a nonlinear dynamic system. Moreover, a new hybrid training method was presented where adaptive genetic algorithms （AGA） and ANN were integrated, which could improve network convergence speed and avoid network into local minima. The proposed method made it easier for operators to understand the inside status of blast furnace and offered real-time and reliable feedback infor- mation for realizing close-loop control for MIQ. Industrial experiments were made through the proposed model based on data collected from a practical steel company. The accuracy could meet the requirements of actual operation.展开更多
A theoretical model to analyze the nonlinear circumferential guided wave(CGW) propagation in a composite circular tube(CCT) is established. The response features of nonlinear CGWs to early damage [denoted by variation...A theoretical model to analyze the nonlinear circumferential guided wave(CGW) propagation in a composite circular tube(CCT) is established. The response features of nonlinear CGWs to early damage [denoted by variations in third-order elastic constants(TOECs)] in an inner layer of CCT are investigated. On the basis of the modal expansion approach, the second-harmonic field of primary CGW propagation can be assumed to be a linear sum of a series of double-frequency CGW(DFCGW) modes. The quantitative relationship of DFCGW mode versus the relative changes in the inner layer TOECs is then investigated. It is found that the changes in the inner layer TOECs of CCT will obviously affect the driving source of DFCGW mode and its modal expansion coefficient, which is intrinsically able to influence the efficiency of cumulative second-harmonic generation(SHG) by primary CGW propagation. Theoretical analyses and numerical simulations demonstrate that the second harmonic of primary CGW is monotonic and very sensitive to the changes in the inner layer TOECs of CCT, while the linear properties of primary CGW propagation almost remain unchanged. Our results provide a potential application for accurately characterizing the level of early damage in the inner layer of CCT through the efficiency of cumulative SHG by primary CGW propagation.展开更多
The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An app...The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An appropriate mode pair of the fundamental and double-frequency CGWs(DFCGWs)has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction.When changes in the inner layer thickness(described as the equivalent inner layer thickness)take place,the corresponding nonlinear CGW measurements are conducted.It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter(Δβ)measured with CGWs propagating through one full circumference,and that the effect of second-harmonic generation(SHG)is very sensitive to change in the inner layer thickness.The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.展开更多
Dense polycrystalline cubic boron nitride(PcBN)composites were fabricated by high-pressure and high-temperature(HPHT)sintering using polysilazane(PSN)and Al as sintering additive.After high-energy ball milling,the cBN...Dense polycrystalline cubic boron nitride(PcBN)composites were fabricated by high-pressure and high-temperature(HPHT)sintering using polysilazane(PSN)and Al as sintering additive.After high-energy ball milling,the cBN fine particles were uniformly coated with PSN by ultrasonic treatment.After thermocuring and pyrolysis,the cBN–SiCN particles were mixed with Al The PcBN composites were prepared after sintering a1450°C for 10 min with a pressure of 5 GPa.The refining effect of high-energy ball milling on the c BN particles was studied by scanning electron microscopy(SEM)and laser particle size analyzer.The oxidation of the cBN particles after milling was investigated by nitrogen–oxygen analyzer.The phase composition and microstructure of the sintered PcBN composites were investigated by X-ray diffractometer(XRD)and SEM.The main phases of the sintered PcBN composites are c BN,AlN,SiC and Si3N4The conversion of cBN to hBN was inhibited by the formation of AlN.The mechanical properties of the sintered PcBN composites were improved by the appearance of SiC and Si3N4.The density and mechanical properties of the PcBN composites both increased with the content of the cBN particles increasing.The sintered sample with 60 wt%cBN,30 wt%PSN and 10 wt%Al showed the best results density of 99.7%,Vickers’hardness of(25.2±0.8)GPa and flexural strength of(602±15)MPa.展开更多
We analyze the effect of second-harmonic generation（SHG） of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low freq...We analyze the effect of second-harmonic generation（SHG） of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.展开更多
Transition metal possesses a unique d-orbital electronic structure,which imparts a diverse range of physical and chemical properties.These properties render them significant in fields such as chemistry and materials s...Transition metal possesses a unique d-orbital electronic structure,which imparts a diverse range of physical and chemical properties.These properties render them significant in fields such as chemistry and materials science.The distinctive optical,electrical,and magnetic properties of these complexes can be attributed to the variations in the quantity of d-orbital electrons,thereby influencing their spin and orbital characteristics.The d-orbitals facilitate the formation of stable multidirectional bonds with ligands,resulting in a variety of geometric structures and rich coordination chemistry.These interactions result in variations in energy levels,thereby producing diverse electrical properties,including low attenuation coefficients,high rectification ratios,and unique multichannel transmission.Moreover,the unpaired electrons inthe d-orbitals can give rise to diverse magnetic behaviors,leading to magnetic effects such as spin-related interfaces,switches,and magnetoresistance.This paves the way for extensive possibilities in the design and application of single-molecule devices.This review elaborates on singlemolecule physical properties of transition metal complexes,including length attenuation,rectification,multi-channel transmission,thermoelectric effect,and spin regulation,which are vital for the functionalization and regulation of molecular electronics.In addition,this review also explores the correlation between these physical properties and the electronic structure of transition metals,discussing the broad prospects of transition metal complexes in the fields of nanoelectronics,optoelectronics,and quantum technology.展开更多
基金supported by the National Natural Science Foundation of China(No.51704087)the Natural Science Foundation of Heilongjiang Province(No.LH2020E083).
文摘Lightweight aluminum alloy conductor materials(Al-Mg-Si alloys)require not only high electrical conductivity to reduce electrical loss,but also high strength to withstand extreme weather conditions.To improve electrical conductivity and mechanical properties of Al-Mg-Si alloy simultaneously,the rare earth La was introduced to modify the Al-Mg-Si alloy.The effect of La addition on the microstructure,tensile properties and electrical conductivity of cast Al-Mg-Si alloy was investigated systematically.Results indicate that the appropriate La content is helpful to improve the strength and electrical conductivity of Al-Mg-Si alloys.When the addition of La is 0.2wt.%,theα-Al grains are refined apparently,Mg and Si solute atoms in the Al matrix are reduced by the formation of Mg_(2)Si phase;the distribution of Al_(11)La_(3)phases is uniform,and the morphology of AlFeSi phase transforms from continuous state to discontinuous state.The Al-Mg-Si-0.2La alloy exhibits the optimal tensile properties and electrical conductivity,with an ultimate tensile strength of 170 MPa,a yield strength of 88 MPa,an elongation of 18.9%,and an electrical conductivity of 44.0%IACS.These values represent improvements of 9.0%,15.8%,70.3%,and 17.3%,respectively,compared to the Al-Mg-Si alloy without La addition.However,excessive La deteriorates the properties of Al-Mg-Si-xLa alloys.
基金Sponsored by National Natural Science Foundation of China(61290323,61333007,614730646)IAPI Fundamental Research Funds(2013ZCX02-09)+1 种基金Fundamental Research Funds for the Central Universities of China(N130508002,N130108001)National High-tech Research and Development Program of China(2015AA043802)
文摘Blast furnace （BF） ironmaking process has complex and nonlinear dynamic characteristics. The molten iron temperature （MIT） as well as Si, P and S contents of molten iron is difficult to be directly measured online, and large-time delay exists in offline analysis through laboratory sampling. A nonlinear multivariate intelligent modeling method was proposed for molten iron quality （MIQ） based on principal component analysis （PCA） and dynamic ge- netic neural network. The modeling method used the practical data processed by PCA dimension reduction as inputs of the dynamic artificial neural network （ANN）. A dynamic feedback link was introduced to produce a dynamic neu- ral network on the basis of traditional back propagation ANN. The proposed model improved the dynamic adaptabili- ty of networks and solved the strong fluctuation and resistance problem in a nonlinear dynamic system. Moreover, a new hybrid training method was presented where adaptive genetic algorithms （AGA） and ANN were integrated, which could improve network convergence speed and avoid network into local minima. The proposed method made it easier for operators to understand the inside status of blast furnace and offered real-time and reliable feedback infor- mation for realizing close-loop control for MIQ. Industrial experiments were made through the proposed model based on data collected from a practical steel company. The accuracy could meet the requirements of actual operation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11834008,11474361,11632004,and 11622430)
文摘A theoretical model to analyze the nonlinear circumferential guided wave(CGW) propagation in a composite circular tube(CCT) is established. The response features of nonlinear CGWs to early damage [denoted by variations in third-order elastic constants(TOECs)] in an inner layer of CCT are investigated. On the basis of the modal expansion approach, the second-harmonic field of primary CGW propagation can be assumed to be a linear sum of a series of double-frequency CGW(DFCGW) modes. The quantitative relationship of DFCGW mode versus the relative changes in the inner layer TOECs is then investigated. It is found that the changes in the inner layer TOECs of CCT will obviously affect the driving source of DFCGW mode and its modal expansion coefficient, which is intrinsically able to influence the efficiency of cumulative second-harmonic generation(SHG) by primary CGW propagation. Theoretical analyses and numerical simulations demonstrate that the second harmonic of primary CGW is monotonic and very sensitive to the changes in the inner layer TOECs of CCT, while the linear properties of primary CGW propagation almost remain unchanged. Our results provide a potential application for accurately characterizing the level of early damage in the inner layer of CCT through the efficiency of cumulative SHG by primary CGW propagation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074050,11834008,and 11704410).
文摘The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An appropriate mode pair of the fundamental and double-frequency CGWs(DFCGWs)has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction.When changes in the inner layer thickness(described as the equivalent inner layer thickness)take place,the corresponding nonlinear CGW measurements are conducted.It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter(Δβ)measured with CGWs propagating through one full circumference,and that the effect of second-harmonic generation(SHG)is very sensitive to change in the inner layer thickness.The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.
基金financially supported by the National Natural Science Foundation of China(No.51402264)the Natural Science Foundation of Henan Province(No.162300410242)the Excellent Young Faculty Research Foundation of Zhengzhou University(Nos.1421320049 and 1421320044)。
文摘Dense polycrystalline cubic boron nitride(PcBN)composites were fabricated by high-pressure and high-temperature(HPHT)sintering using polysilazane(PSN)and Al as sintering additive.After high-energy ball milling,the cBN fine particles were uniformly coated with PSN by ultrasonic treatment.After thermocuring and pyrolysis,the cBN–SiCN particles were mixed with Al The PcBN composites were prepared after sintering a1450°C for 10 min with a pressure of 5 GPa.The refining effect of high-energy ball milling on the c BN particles was studied by scanning electron microscopy(SEM)and laser particle size analyzer.The oxidation of the cBN particles after milling was investigated by nitrogen–oxygen analyzer.The phase composition and microstructure of the sintered PcBN composites were investigated by X-ray diffractometer(XRD)and SEM.The main phases of the sintered PcBN composites are c BN,AlN,SiC and Si3N4The conversion of cBN to hBN was inhibited by the formation of AlN.The mechanical properties of the sintered PcBN composites were improved by the appearance of SiC and Si3N4.The density and mechanical properties of the PcBN composites both increased with the content of the cBN particles increasing.The sintered sample with 60 wt%cBN,30 wt%PSN and 10 wt%Al showed the best results density of 99.7%,Vickers’hardness of(25.2±0.8)GPa and flexural strength of(602±15)MPa.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11834008,11632004,11474361 and 11622430
文摘We analyze the effect of second-harmonic generation（SHG） of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.
基金financially supported by the National Key R&D Program of China(Nos.2021YFA1200102,2021YFA1200101,2023YFF1205803,2022YFE0128700)the National Natural Science Foundation of China(Nos.22173050,22150013,21727806,21933001)+1 种基金Beijing National Laboratory for Molecular Sciences(No.BNLMS-CXXM-202407)the Natural Science Foundation of Beijing(No.2222009)
文摘Transition metal possesses a unique d-orbital electronic structure,which imparts a diverse range of physical and chemical properties.These properties render them significant in fields such as chemistry and materials science.The distinctive optical,electrical,and magnetic properties of these complexes can be attributed to the variations in the quantity of d-orbital electrons,thereby influencing their spin and orbital characteristics.The d-orbitals facilitate the formation of stable multidirectional bonds with ligands,resulting in a variety of geometric structures and rich coordination chemistry.These interactions result in variations in energy levels,thereby producing diverse electrical properties,including low attenuation coefficients,high rectification ratios,and unique multichannel transmission.Moreover,the unpaired electrons inthe d-orbitals can give rise to diverse magnetic behaviors,leading to magnetic effects such as spin-related interfaces,switches,and magnetoresistance.This paves the way for extensive possibilities in the design and application of single-molecule devices.This review elaborates on singlemolecule physical properties of transition metal complexes,including length attenuation,rectification,multi-channel transmission,thermoelectric effect,and spin regulation,which are vital for the functionalization and regulation of molecular electronics.In addition,this review also explores the correlation between these physical properties and the electronic structure of transition metals,discussing the broad prospects of transition metal complexes in the fields of nanoelectronics,optoelectronics,and quantum technology.
