Thin-film solar cells possess the distinct advantage of being cost-effective and relatively simple to manufacture. Nevertheless, it is of utmost importance to enhance their overall performance. In this research work, ...Thin-film solar cells possess the distinct advantage of being cost-effective and relatively simple to manufacture. Nevertheless, it is of utmost importance to enhance their overall performance. In this research work, copper indium gallium selenide (CIGS)-based ultra-thin solar cell (SC) configuration (Ag/ZnO/ZnSe/CIGS/Si/Ni) has been designed and examined using SCAPS-1D. The numerical calculations revealed that this new design resulted in a substantial improvement in SC performance. This study explores the utilization of two absorber layers, CIGS and Si, both with a total of 2 μm thickness, to enhance device performance while reducing material costs, observing an increase in key SC parameters as the Si absorber layer thickness is increased, reaching a maximum efficiency of 29.13% when CIGS and Si thicknesses are set at 0.4 μm and 1.6 μm, respectively with doping absorber doping density of 10<sup>14</sup> cm<sup>-3</sup>. Furthermore, we analyze the impact of variation in absorber and buffer layer thickness, as well as doping concentration, surface recombination velocity (SRV), electron affinity, series-shunt resistance, and temperature, on optimized CIGS SC parameters such as short-circuit current density (J<sub>SC</sub>), open circuit voltage (V<sub>OC</sub>), fill factor (FF), and power conversion efficiency (PCE). The findings yielded by the investigation offer significant elucidation regarding the fabrication of economically viable and highly efficient non-hazardous CIGS ultra-thin SC.展开更多
This study explored the performances of CZTS-based thin-film solar cell with three novel buffer layer materials ZnS, CdS, and CdZnS, as well as with variation in thickness of buffer and absorber-layer, doping concentr...This study explored the performances of CZTS-based thin-film solar cell with three novel buffer layer materials ZnS, CdS, and CdZnS, as well as with variation in thickness of buffer and absorber-layer, doping concentrations of absorber-layer material and operating temperature. Our aims focused to identify the most optimal thin-film solar cell structure that offers high efficiency and lower toxicity which are desirable for sustainable and eco-friendly energy sources globally. SCAPS-1D, widely used software for modeling and simulating solar cells, has been used and solar cell fundamental performance parameters such as open-circuited voltage (), short-circuited current density (), fill-factor() and efficiency() have been optimized in this study. Based on our simulation results, it was found that CZTS solar cell with Cd<sub>0.4</sub>Zn<sub>0.6</sub>S as buffer-layer offers the most optimal combination of high efficiency and lower toxicity in comparison to other structure investigated in our study. Although the efficiency of Cd<sub>0.4</sub>Zn<sub>0.6</sub>S, ZnS and CdS are comparable, Cd<sub>0.4</sub>Zn<sub>0.6</sub>S is preferable to use as buffer-layer for its non-toxic property. In addition, evaluation of performance as a function of buffer-layer thickness for Cd<sub>0.4</sub>Zn<sub>0.6</sub>S, ZnS and CdS showed that optimum buffer-layer thickness for Cd<sub>0.4</sub>Zn<sub>0.6</sub>S was in the range from 50 to 150nm while ZnS offered only 50 – 75 nm. Furthermore, the temperature dependence performance parameters evaluation revealed that it is better to operate solar cell at temperature 290K for stable operation with optimum performances. This study would provide valuable insights into design and optimization of nanotechnology-based solar energy technology for minimizing global energy crisis and developing eco-friendly energy sources sustainable and simultaneously.展开更多
The paper reported the design and thorough analysis of a thin-film solar cell (TFSC) based on molybdenum disulfide (MoS<sub>2</sub>) with an integrated Copper(I) Oxide (Cu<sub>2</sub>O) hole tr...The paper reported the design and thorough analysis of a thin-film solar cell (TFSC) based on molybdenum disulfide (MoS<sub>2</sub>) with an integrated Copper(I) Oxide (Cu<sub>2</sub>O) hole transport layer (HTL), employing the one-dimensional Solar Cell Capacitance Simulator (SCAPS-1D) software. By varying crucial parameters such as absorber layer thickness, doping density, and bulk defect density, as well as HTL thickness, doping concentration, and electron affinity, defect density at ZnO/absorber and absorber/Cu<sub>2</sub>O interfaces, and operating temperature, we explored key photovoltaic measures including open circuit voltage (Voc), short-circuit current density (Jsc), fill-factor (FF), and power conversion efficiency (PCE) of the hetero-junction solar cell. The study demonstrated an efficiency of 18.87% for the MoS<sub>2</sub> solar cell without HTL, while the proposed solar cell (SC) utilizing Cu<sub>2</sub>O HTL and optimized device structure exhibited a remarkable PCE of 26.70%. The outcomes derived from the present study offer valuable insights for the progress of a highly efficient and economically viable MoS<sub>2</sub> hetero-junction TFSC.展开更多
Copper Zinc Tin Sulfide (CZTS) solar cell (SC) has garnered significant attention from researchers in recent years owing to its affordability, less toxic earth abundant constituents, remarkable conversion efficiency a...Copper Zinc Tin Sulfide (CZTS) solar cell (SC) has garnered significant attention from researchers in recent years owing to its affordability, less toxic earth abundant constituents, remarkable conversion efficiency and promising prospects for the bulk manufacture of thin film solar cells. Moreover, CZTS exhibits a high absorption coefficient and possesses an optimal adjustable direct band gap, making it a promising candidate for various photovoltaic applications. Hence, in this study, a new configuration (CuSbS<sub>2</sub>/CZTS/CdS/i-ZnO/ Al: ZnO) is introduced for CZTS SC, which was simulated using SCAPS-1D. The utilization of CuSbS<sub>2</sub> as the back surface field (BSF) and CdS as the buffer layer was investigated to enhance the performance of CZTS SC. Moreover, a comparative numerical analysis was carried out to contrast the SC configurations of CZTS/CdS/i-ZnO/Al: ZnO and CuSbS<sub>2</sub>/CZTS/CdS/i-ZnO/Al: ZnO. In this study, the impact on SC parameters such as open circuit voltage (V<sub>oc</sub>), short- circuit current density (J<sub>sc</sub>), Fill-factor (FF), and Power Conversion Efficiency (PCE) by varying thickness, doping density, defect density of absorber and buffer layer, thickness and doping density of BSF, and operating temperature have been thoroughly investigated. The optimum structure consists of i-ZnO and Al: ZnO for the window layer, CdS for the buffer layer, CZTS for the absorber layer, and BSF layers with thicknesses of 50 nm, 200 nm, 50 nm, 2000 nm, and 50 nm, respectively. The designed SC with a BSF layer had a PCE of 28.76%, J<sub>SC</sub> of 32.53 mA/cm<sup>2</sup>, V<sub>oc</sub> of 1.01233 V, and FF of 87.35%. The structure without a BSF layer has a PCE of 24.21%, V<sub>oc</sub> of 0.898 V, J<sub>SC</sub> of 31.56 mA/cm<sup>2</sup>, and FF of 85.32%. Furthermore, an analysis of temperature, quantum efficiency (QE), C- V characteristics and the J-V curve was conducted, revealing the potential of CuSbS<sub>2</sub> as a BSF and CdS as a buffer layer in high-performance, cost-effective CZTS SC designs.展开更多
文摘Thin-film solar cells possess the distinct advantage of being cost-effective and relatively simple to manufacture. Nevertheless, it is of utmost importance to enhance their overall performance. In this research work, copper indium gallium selenide (CIGS)-based ultra-thin solar cell (SC) configuration (Ag/ZnO/ZnSe/CIGS/Si/Ni) has been designed and examined using SCAPS-1D. The numerical calculations revealed that this new design resulted in a substantial improvement in SC performance. This study explores the utilization of two absorber layers, CIGS and Si, both with a total of 2 μm thickness, to enhance device performance while reducing material costs, observing an increase in key SC parameters as the Si absorber layer thickness is increased, reaching a maximum efficiency of 29.13% when CIGS and Si thicknesses are set at 0.4 μm and 1.6 μm, respectively with doping absorber doping density of 10<sup>14</sup> cm<sup>-3</sup>. Furthermore, we analyze the impact of variation in absorber and buffer layer thickness, as well as doping concentration, surface recombination velocity (SRV), electron affinity, series-shunt resistance, and temperature, on optimized CIGS SC parameters such as short-circuit current density (J<sub>SC</sub>), open circuit voltage (V<sub>OC</sub>), fill factor (FF), and power conversion efficiency (PCE). The findings yielded by the investigation offer significant elucidation regarding the fabrication of economically viable and highly efficient non-hazardous CIGS ultra-thin SC.
文摘This study explored the performances of CZTS-based thin-film solar cell with three novel buffer layer materials ZnS, CdS, and CdZnS, as well as with variation in thickness of buffer and absorber-layer, doping concentrations of absorber-layer material and operating temperature. Our aims focused to identify the most optimal thin-film solar cell structure that offers high efficiency and lower toxicity which are desirable for sustainable and eco-friendly energy sources globally. SCAPS-1D, widely used software for modeling and simulating solar cells, has been used and solar cell fundamental performance parameters such as open-circuited voltage (), short-circuited current density (), fill-factor() and efficiency() have been optimized in this study. Based on our simulation results, it was found that CZTS solar cell with Cd<sub>0.4</sub>Zn<sub>0.6</sub>S as buffer-layer offers the most optimal combination of high efficiency and lower toxicity in comparison to other structure investigated in our study. Although the efficiency of Cd<sub>0.4</sub>Zn<sub>0.6</sub>S, ZnS and CdS are comparable, Cd<sub>0.4</sub>Zn<sub>0.6</sub>S is preferable to use as buffer-layer for its non-toxic property. In addition, evaluation of performance as a function of buffer-layer thickness for Cd<sub>0.4</sub>Zn<sub>0.6</sub>S, ZnS and CdS showed that optimum buffer-layer thickness for Cd<sub>0.4</sub>Zn<sub>0.6</sub>S was in the range from 50 to 150nm while ZnS offered only 50 – 75 nm. Furthermore, the temperature dependence performance parameters evaluation revealed that it is better to operate solar cell at temperature 290K for stable operation with optimum performances. This study would provide valuable insights into design and optimization of nanotechnology-based solar energy technology for minimizing global energy crisis and developing eco-friendly energy sources sustainable and simultaneously.
文摘The paper reported the design and thorough analysis of a thin-film solar cell (TFSC) based on molybdenum disulfide (MoS<sub>2</sub>) with an integrated Copper(I) Oxide (Cu<sub>2</sub>O) hole transport layer (HTL), employing the one-dimensional Solar Cell Capacitance Simulator (SCAPS-1D) software. By varying crucial parameters such as absorber layer thickness, doping density, and bulk defect density, as well as HTL thickness, doping concentration, and electron affinity, defect density at ZnO/absorber and absorber/Cu<sub>2</sub>O interfaces, and operating temperature, we explored key photovoltaic measures including open circuit voltage (Voc), short-circuit current density (Jsc), fill-factor (FF), and power conversion efficiency (PCE) of the hetero-junction solar cell. The study demonstrated an efficiency of 18.87% for the MoS<sub>2</sub> solar cell without HTL, while the proposed solar cell (SC) utilizing Cu<sub>2</sub>O HTL and optimized device structure exhibited a remarkable PCE of 26.70%. The outcomes derived from the present study offer valuable insights for the progress of a highly efficient and economically viable MoS<sub>2</sub> hetero-junction TFSC.
文摘Copper Zinc Tin Sulfide (CZTS) solar cell (SC) has garnered significant attention from researchers in recent years owing to its affordability, less toxic earth abundant constituents, remarkable conversion efficiency and promising prospects for the bulk manufacture of thin film solar cells. Moreover, CZTS exhibits a high absorption coefficient and possesses an optimal adjustable direct band gap, making it a promising candidate for various photovoltaic applications. Hence, in this study, a new configuration (CuSbS<sub>2</sub>/CZTS/CdS/i-ZnO/ Al: ZnO) is introduced for CZTS SC, which was simulated using SCAPS-1D. The utilization of CuSbS<sub>2</sub> as the back surface field (BSF) and CdS as the buffer layer was investigated to enhance the performance of CZTS SC. Moreover, a comparative numerical analysis was carried out to contrast the SC configurations of CZTS/CdS/i-ZnO/Al: ZnO and CuSbS<sub>2</sub>/CZTS/CdS/i-ZnO/Al: ZnO. In this study, the impact on SC parameters such as open circuit voltage (V<sub>oc</sub>), short- circuit current density (J<sub>sc</sub>), Fill-factor (FF), and Power Conversion Efficiency (PCE) by varying thickness, doping density, defect density of absorber and buffer layer, thickness and doping density of BSF, and operating temperature have been thoroughly investigated. The optimum structure consists of i-ZnO and Al: ZnO for the window layer, CdS for the buffer layer, CZTS for the absorber layer, and BSF layers with thicknesses of 50 nm, 200 nm, 50 nm, 2000 nm, and 50 nm, respectively. The designed SC with a BSF layer had a PCE of 28.76%, J<sub>SC</sub> of 32.53 mA/cm<sup>2</sup>, V<sub>oc</sub> of 1.01233 V, and FF of 87.35%. The structure without a BSF layer has a PCE of 24.21%, V<sub>oc</sub> of 0.898 V, J<sub>SC</sub> of 31.56 mA/cm<sup>2</sup>, and FF of 85.32%. Furthermore, an analysis of temperature, quantum efficiency (QE), C- V characteristics and the J-V curve was conducted, revealing the potential of CuSbS<sub>2</sub> as a BSF and CdS as a buffer layer in high-performance, cost-effective CZTS SC designs.
