The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy con...The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy conversion.Substantial efforts have been made to improve the understanding of CO_(2)reduction reaction(CO_(2)RR)mechanisms by computational and spectroscopic studies.An in-depth understanding of CO_(2)RR mechanism can provide the guidance and criteria for designing high-efficiency catalysts,and hence,steering CO_(2)RR to desired products.This review systematically discusses the formation mechanisms and reaction pathways of various CO_(2)RR products,including C_(1)products(CO,HCOOH,and CH_(4)),C_(2)products(C_(2)H_(4),C_(2)H_(5)OH,and CH_(3)COOH),and C_(3+)products(C_(3)H_(6),C_(3)H_(7)OH,and others).The reaction pathways are elucidated by analyzing the adsorption behavior,energy barriers,and intermediate coupling steps involved in the generation of each product.Particular emphasis is placed on the key intermediates,such as^(*)OCHO,^(*)COOH,^(*)CO,^(*)OCCOH,and^(*)CCO,which play crucial roles in determining the product selectivity.The effects of catalyst composition,morphology,and electronic structure on the adsorption and activation of these intermediates are also discussed.Moreover,advanced characterization techniques,including in-situ spectroscopy and isotopic labeling experiments,are highlighted for their contributions to unraveling the reaction mechanisms.The review aims to provide critical insights to reveal the activity-determining para meters and underlying CO_(2)RR mechanisms,which will guide the rational design of next-generation electrocatalysts for selective CO^(2)RR towards high-value products.展开更多
Plasma electrolytic oxidation(PEO)coatings were prepared on Al−Mg laminated macro composites(LMCs)using both unipolar and bipolar waveforms in an appropriate electrolyte for both aluminum and magnesium alloys.The tech...Plasma electrolytic oxidation(PEO)coatings were prepared on Al−Mg laminated macro composites(LMCs)using both unipolar and bipolar waveforms in an appropriate electrolyte for both aluminum and magnesium alloys.The techniques of FESEM/EDS,grazing incident beam X-ray diffraction(GIXRD),and electrochemical methods of potentiodynamic polarization and electrochemical impedance spectroscopy(EIS)were used to characterize the coatings.The results revealed that the coatings produced using the bipolar waveform exhibited lower porosity and higher thickness than those produced using the unipolar one.The corrosion performance of the specimens’cut edge was investigated using EIS after 1,8,and 12 h of immersion in a 3.5 wt.%NaCl solution.It was observed that the coating produced using the bipolar waveform demonstrated the highest corrosion resistance after 12 h of immersion,with an estimated corrosion resistance of 5.64 kΩ·cm^(2),which was approximately 3 times higher than that of the unipolar coating.Notably,no signs of galvanic corrosion were observed in the LMCs,and only minor corrosion attacks were observed on the magnesium layer in some areas.展开更多
This study aims to examine the effect of clay micro particles addition on the microstructure,wear and corrosion behavior of PEO coatings on AM 50 magnesium alloy.PEO coatings were prepared using an aluminate-based ele...This study aims to examine the effect of clay micro particles addition on the microstructure,wear and corrosion behavior of PEO coatings on AM 50 magnesium alloy.PEO coatings were prepared using an aluminate-based electrolyte with and without the presence of 5 g/L clay particles.The structure and composition of the coatings were evaluated using SEM,EDS and XRD.The wear investigations were conducted using a ball-on-disk tribometer at 2,5 and 10 N loads.The corrosion behavior of the coatings was examined using polarization and EIS tests in 0.5 wt.%NaCl.The results revealed that the addition of clay particles deteriorated the wear resistance of the coatings under the loads of 5 and 10 N.The SEM examinations of the worn surfaces indicated that a combination of adhesive and abrasive wear mechanisms was activated for the coating with clay particles.The poor wear performance of the clay-incorporated coating was related to its lower adhesion strength and higher roughness.The potentiodynamic polarization examinations revealed that the addition of clay particles slightly decreased the corrosion rate of the coatings.Corrosion resistance of the clay-containing coating was attributed to its compactness,as indicated by the results of EIS tests.展开更多
Additive manufacturing(AM),as an advanced manufacturing technology,enables the production of personalized orthopedic implant devices with complex geometries that closely resemble bone structures.Titanium and its alloy...Additive manufacturing(AM),as an advanced manufacturing technology,enables the production of personalized orthopedic implant devices with complex geometries that closely resemble bone structures.Titanium and its alloys are extensively employed in biomedical fields like orthopedics and dentistry,thanks to the excellent compatibility with the human body and high corrosion resistance due to the existence of a thin protective oxide layer known as TiO_(2) upon exposure to oxygen on the surface.However,in joint inflammation,reactive oxygen species like hydrogen peroxide and radicals can damage the passive film on Ti implants,leading to their deterioration.Although AM technology for metallic implants is still developing,advancements in printing and new alloys are crucial for widespread use.This work aims to investigate the corrosion resistance of in-situ alloyed Ti536(Ti5Al3V6Cu)alloy produced through electron beam powder bed fusion(EB-PBF)under simulated peri-implant inflammatory conditions.The corrosion resistance was evaluated using electrochemical experiments conducted in the presence of 0.1%H_(2)O_(2) in a physiological saline solution(0.9%NaCl)to replicate the conditions that may occur during post-operative inflammation.The findings demonstrate that the micro-environment surrounding the implant during peri-implant inflammation is highly corrosive and can lead to the degradation of the TiO_(2) passive layer.Physiological saline with H_(2)O_(2) significantly increased biomaterial open circuit potential up to 0.36 mV vs.Ag/AgCl compared to physiological saline only.Potentiodynamic polarization(PDP)plots confirm this increase,as well.The PDP and electrochemical impedance spectroscopy(EIS)tests indicated that adding Cu does not impact the corrosion resistance of the Ti536 alloy initially under simulated inflammatory conditions,but prolonged immersion leads to enhanced corrosion resistance for all biomaterials tested,indicating the formation of an oxide layer after the reduction of the solution oxidizing power.These results suggest that modifying custom alloys by adding appropriate elements significantly enhances corrosion resistance,particularly in inflammatory conditions.展开更多
This study introduces a nanostructured MgO coating fabricated via anodization in a non-aqueous electrolyte,offering a novel approach to addressing the challenges of corrosion resistance and biofunctionality.The surfac...This study introduces a nanostructured MgO coating fabricated via anodization in a non-aqueous electrolyte,offering a novel approach to addressing the challenges of corrosion resistance and biofunctionality.The surface was characterized before and after immersion testing using field emission scanning electron microscopy(FESEM),energy-dispersive X-ray spectroscopy(EDX),and X-ray diffraction(XRD).Electrochemical impedance spectroscopy(EIS)and potentiodynamic polarization tests demonstrated a 2-fold reduction in the corrosion resistance compared to untreated magnesium.Biomineralization studies demonstrated the uniform formation of apatite with a Ca/P ratio of 1.35 on the nanostructured surface after 14 days in simulated body fluid(SBF),surpassing that of microstructured MgO.Hydrogen evolution decreased from 912±38μL cm^(-2)for untreated Mg to 615±32μL cm^(-2)for the Mg/MgO nanostructure and 545±29μL cm^(-2)for the Mg/Mg O/HA sample.These findings highlight the potential of nanostructured MgO coatings to advance Mg-based implants by providing enhanced corrosion protection,improved biomineralization,reduced hemolysis and increased cell viability,and reduced H_(2)generation.展开更多
Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical ...Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical applications. Besides, it is necessary to endow Mg alloys with bioactive property, which is crucial for temporary bone implants. Here, a self-healing, corrosion resistant and bioactive duplex coating of plasma electrolytic oxidization(PEO)/polydopamine(PDA) is applied on AZ91 substrate using PEO and subsequent electrodeposition process. Moreover, the role of different electrodeposition times(60 s, 120 s) and dopamine concentrations(1 and 1.5 mg/ml) to improve corrosion resistance, bioactivity, biocompatibility and self-healing property and its mechanism are investigated. The results indicate that the PEO coating is efficiently sealed by the PDA, depending on the electrodeposition parameters. Noticeably, electrodeposition for 120 s in dopamine concentration of 1 mg/ml(120T-1C) results in the formation of uniform and crack-free PDA coating. Duplex PEO/PDA coatings reveal high bioactivity compared to PEO coating, owing to electrostatic interaction between PDA top-layer and calcium and phosphate ions as well as high hydrophilicity of coatings. In addition, duplex PEO/PDA coatings also show improved and more stable protective performance than the PEO and bare alloy, depending on the PDA deposition parameters. Noticeably, the corrosion current density of the 120T-1C decreases one orders of magnitude compared to PEO. In addition, the presence of a broad passivation region in the anodic polarization branch shows durable self-healing property via Zipper-like mechanism, demonstrating the duplex coating could preserve promising corrosion resistance.Furthermore, the cytocompatibility of duplex coated samples is also confirmed via interaction with MG63 cells. In summary, the PEO/PDA coating with great corrosion protection, self-healing ability, bioactivity and biocompatibility could be a promising candidate for degradable magnesium-based implants.展开更多
Duplex NiP/TiN coatings consisting of the electroless intermediate layers and the physical vapor deposition(PVD) top layers were fabricated on the AA6061 aluminum alloy in order to enhance the load bearing capacity. T...Duplex NiP/TiN coatings consisting of the electroless intermediate layers and the physical vapor deposition(PVD) top layers were fabricated on the AA6061 aluminum alloy in order to enhance the load bearing capacity. The main objective of this study was to model the load bearing based on the thickness, adhesion and elastic modulus of the coatings. For this purpose, partial least square(PLS) and support vector regression(SVR) approaches were employed.The results showed that both models had an acceptable performance;however, the PLS model outperformed SVR. The correlation coefficients between thickness, adhesion and elastic modulus with load bearing were 0.841, 0.8092 and 0.7657, respectively;so, thickness had the greatest effect on the load bearing capacity. The composition and structure of the samples were evaluated using XRD and SEM. The load capacity of the coated samples was also discussed based on the wear and adhesion evaluations. Dry sliding wear tests, under a load of 2 N and a sliding distance of 100 m,demonstrated the complete destruction of the coated specimens with low load capacity. The samples with high load capacity showed not only a superior tribological performance, but also a remarkable adhesion according to the Rockwell superficial hardness test.展开更多
This study investigated the effects of multi-walled carbon nanotubes(MWCNTs) and polycaprolactone(PCL) on the quasi-in vivo corrosion behavior of AZ31B Mg alloy treated by plasma electrolytic oxidation(PEO). Thin(~2 ...This study investigated the effects of multi-walled carbon nanotubes(MWCNTs) and polycaprolactone(PCL) on the quasi-in vivo corrosion behavior of AZ31B Mg alloy treated by plasma electrolytic oxidation(PEO). Thin(~2 μm, PCTPCL4) and thick(~60 μm, PCTPCL6) PCL layers were applied only onto the MWCNTs-PEO coating(PCT) as it showed better corrosion performance. Findings reveal that incorporation of MWCNTs induced several structural and functional modifications in the PEO coating, such as increased roughness, a thicker inner barrier layer, and reduced hydrophilicity.Quasi-in vivo corrosion testing was carried out under controlled temperature, p H, and fluid flow in simulated body fluid(SBF) by electrochemical impedance spectroscopy(EIS) and hydrogen evolution experiments. EIS results revealed that, after 48 h immersion, a diffusion process controlled hydration of the ceramic coatings. Comparison of the collected hydrogen after 15 days of immersion in the quasi-in vivo environment revealed that the PEO and PCT ceramic coatings decreased hydrogen generation by up to 74% and 91%, respectively, compared to non-coated alloy.PCTPCL6 coating exhibited the lowest amount of collected hydrogen(0.2 m L/cm^(2)). The thick PCL layer delayed the onset of substrate corrosion for at least 120 h, reducing the corrosion rate by 85% compared with the PCT.展开更多
In this work, two types of CP Ti cubes with similar volumetric energy densities(VED) but diff erent process parameters were produced using laser powder bed fusion(LPBF) method. The corrosion behavior of the fabricated...In this work, two types of CP Ti cubes with similar volumetric energy densities(VED) but diff erent process parameters were produced using laser powder bed fusion(LPBF) method. The corrosion behavior of the fabricated specimens was investigated by conducting electrochemical impedance spectroscopy(EIS) and polarization experiments in simulated body fl uid(SBF) solution at 37 °C. The results indicated that the microstructure and porosities, which are of great importance for biomedical applications, can be controlled by changing the process parameters even under constant energy densities. The sample produced with a lower laser power(E1) was featured with a higher level of porosity and thinner alpha laths, as compared with the sample fabricated with a higher laser power(E2). Moreover, results obtained from the bioactivity tests revealed that the sample produced with a higher laser power conferred a slight improvement in the bioactivity due to the higher amount of porosity. Lower laser power and hence higher porosity level promoted the formation of bone-like apatite on the surface of the printed specimens. The potentiodynamic polarization tests revealed inferior corrosion resistance for the fabricated sample with higher porosity. Moreover, the EIS results after diff erent immersion times indicated that a stable oxide film was formed on the surface of samples for all immersion times. After 1 and 3 days of immersion, superior passivation behavior was observed for the sample fabricated with lower laser power. However, very similar impedance and phase values were observed for all the samples after 14 days of immersion.展开更多
基金financially supported by the National Natural Science Foundation of China(Grants 22225901,21975237 and 51702312)the Fundamental Research Funds for the Central Universities(Grant WK2340000101)+5 种基金the USTC Research Funds of the Double First-Class Initiative(Grant YD2340002007 and YD9990002017)the Open Funds of the State Key Laboratory of Rare Earth Resource Utilization(Grant RERU2022007)the China Postdoctoral Science Foundation(Grants 2023M733371,2024M750006 and 2023T160617)Postdoctoral Fellowship Program(Grade C)of China Postdoctoral Science Foundation(GZC20230008)the Natural Science Foundation Youth Project of Anhui Province(2408085QB065)the Postdoctoral Research Funding Project of Anhui Province(2023B727)。
文摘The electrochemical reduction of carbon dioxide(CO_(2))into value-added chemicals and fuels has been extensively studied as a promising strategy for mitigating environmental issues and achieving sustainable energy conversion.Substantial efforts have been made to improve the understanding of CO_(2)reduction reaction(CO_(2)RR)mechanisms by computational and spectroscopic studies.An in-depth understanding of CO_(2)RR mechanism can provide the guidance and criteria for designing high-efficiency catalysts,and hence,steering CO_(2)RR to desired products.This review systematically discusses the formation mechanisms and reaction pathways of various CO_(2)RR products,including C_(1)products(CO,HCOOH,and CH_(4)),C_(2)products(C_(2)H_(4),C_(2)H_(5)OH,and CH_(3)COOH),and C_(3+)products(C_(3)H_(6),C_(3)H_(7)OH,and others).The reaction pathways are elucidated by analyzing the adsorption behavior,energy barriers,and intermediate coupling steps involved in the generation of each product.Particular emphasis is placed on the key intermediates,such as^(*)OCHO,^(*)COOH,^(*)CO,^(*)OCCOH,and^(*)CCO,which play crucial roles in determining the product selectivity.The effects of catalyst composition,morphology,and electronic structure on the adsorption and activation of these intermediates are also discussed.Moreover,advanced characterization techniques,including in-situ spectroscopy and isotopic labeling experiments,are highlighted for their contributions to unraveling the reaction mechanisms.The review aims to provide critical insights to reveal the activity-determining para meters and underlying CO_(2)RR mechanisms,which will guide the rational design of next-generation electrocatalysts for selective CO^(2)RR towards high-value products.
文摘Plasma electrolytic oxidation(PEO)coatings were prepared on Al−Mg laminated macro composites(LMCs)using both unipolar and bipolar waveforms in an appropriate electrolyte for both aluminum and magnesium alloys.The techniques of FESEM/EDS,grazing incident beam X-ray diffraction(GIXRD),and electrochemical methods of potentiodynamic polarization and electrochemical impedance spectroscopy(EIS)were used to characterize the coatings.The results revealed that the coatings produced using the bipolar waveform exhibited lower porosity and higher thickness than those produced using the unipolar one.The corrosion performance of the specimens’cut edge was investigated using EIS after 1,8,and 12 h of immersion in a 3.5 wt.%NaCl solution.It was observed that the coating produced using the bipolar waveform demonstrated the highest corrosion resistance after 12 h of immersion,with an estimated corrosion resistance of 5.64 kΩ·cm^(2),which was approximately 3 times higher than that of the unipolar coating.Notably,no signs of galvanic corrosion were observed in the LMCs,and only minor corrosion attacks were observed on the magnesium layer in some areas.
文摘This study aims to examine the effect of clay micro particles addition on the microstructure,wear and corrosion behavior of PEO coatings on AM 50 magnesium alloy.PEO coatings were prepared using an aluminate-based electrolyte with and without the presence of 5 g/L clay particles.The structure and composition of the coatings were evaluated using SEM,EDS and XRD.The wear investigations were conducted using a ball-on-disk tribometer at 2,5 and 10 N loads.The corrosion behavior of the coatings was examined using polarization and EIS tests in 0.5 wt.%NaCl.The results revealed that the addition of clay particles deteriorated the wear resistance of the coatings under the loads of 5 and 10 N.The SEM examinations of the worn surfaces indicated that a combination of adhesive and abrasive wear mechanisms was activated for the coating with clay particles.The poor wear performance of the clay-incorporated coating was related to its lower adhesion strength and higher roughness.The potentiodynamic polarization examinations revealed that the addition of clay particles slightly decreased the corrosion rate of the coatings.Corrosion resistance of the clay-containing coating was attributed to its compactness,as indicated by the results of EIS tests.
基金Open access funding provided by Politecnico di Torino within the CRUI-CARE Agreement.
文摘Additive manufacturing(AM),as an advanced manufacturing technology,enables the production of personalized orthopedic implant devices with complex geometries that closely resemble bone structures.Titanium and its alloys are extensively employed in biomedical fields like orthopedics and dentistry,thanks to the excellent compatibility with the human body and high corrosion resistance due to the existence of a thin protective oxide layer known as TiO_(2) upon exposure to oxygen on the surface.However,in joint inflammation,reactive oxygen species like hydrogen peroxide and radicals can damage the passive film on Ti implants,leading to their deterioration.Although AM technology for metallic implants is still developing,advancements in printing and new alloys are crucial for widespread use.This work aims to investigate the corrosion resistance of in-situ alloyed Ti536(Ti5Al3V6Cu)alloy produced through electron beam powder bed fusion(EB-PBF)under simulated peri-implant inflammatory conditions.The corrosion resistance was evaluated using electrochemical experiments conducted in the presence of 0.1%H_(2)O_(2) in a physiological saline solution(0.9%NaCl)to replicate the conditions that may occur during post-operative inflammation.The findings demonstrate that the micro-environment surrounding the implant during peri-implant inflammation is highly corrosive and can lead to the degradation of the TiO_(2) passive layer.Physiological saline with H_(2)O_(2) significantly increased biomaterial open circuit potential up to 0.36 mV vs.Ag/AgCl compared to physiological saline only.Potentiodynamic polarization(PDP)plots confirm this increase,as well.The PDP and electrochemical impedance spectroscopy(EIS)tests indicated that adding Cu does not impact the corrosion resistance of the Ti536 alloy initially under simulated inflammatory conditions,but prolonged immersion leads to enhanced corrosion resistance for all biomaterials tested,indicating the formation of an oxide layer after the reduction of the solution oxidizing power.These results suggest that modifying custom alloys by adding appropriate elements significantly enhances corrosion resistance,particularly in inflammatory conditions.
基金The authors thank the DFG(KI 2169/2-1)the European Union(EU-RIA NOMAD,101091669)for funding this work+1 种基金The Micro and Nanoanalytics Facility(MNaF),funded by the DFG(DFG INST 221/131-1)at the University of Siegen,and the Materials Science Faculty of the Isfahan University of Technology(IUT)were utilized for some of the work and analysis,respectively.
文摘This study introduces a nanostructured MgO coating fabricated via anodization in a non-aqueous electrolyte,offering a novel approach to addressing the challenges of corrosion resistance and biofunctionality.The surface was characterized before and after immersion testing using field emission scanning electron microscopy(FESEM),energy-dispersive X-ray spectroscopy(EDX),and X-ray diffraction(XRD).Electrochemical impedance spectroscopy(EIS)and potentiodynamic polarization tests demonstrated a 2-fold reduction in the corrosion resistance compared to untreated magnesium.Biomineralization studies demonstrated the uniform formation of apatite with a Ca/P ratio of 1.35 on the nanostructured surface after 14 days in simulated body fluid(SBF),surpassing that of microstructured MgO.Hydrogen evolution decreased from 912±38μL cm^(-2)for untreated Mg to 615±32μL cm^(-2)for the Mg/MgO nanostructure and 545±29μL cm^(-2)for the Mg/Mg O/HA sample.These findings highlight the potential of nanostructured MgO coatings to advance Mg-based implants by providing enhanced corrosion protection,improved biomineralization,reduced hemolysis and increased cell viability,and reduced H_(2)generation.
文摘Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical applications. Besides, it is necessary to endow Mg alloys with bioactive property, which is crucial for temporary bone implants. Here, a self-healing, corrosion resistant and bioactive duplex coating of plasma electrolytic oxidization(PEO)/polydopamine(PDA) is applied on AZ91 substrate using PEO and subsequent electrodeposition process. Moreover, the role of different electrodeposition times(60 s, 120 s) and dopamine concentrations(1 and 1.5 mg/ml) to improve corrosion resistance, bioactivity, biocompatibility and self-healing property and its mechanism are investigated. The results indicate that the PEO coating is efficiently sealed by the PDA, depending on the electrodeposition parameters. Noticeably, electrodeposition for 120 s in dopamine concentration of 1 mg/ml(120T-1C) results in the formation of uniform and crack-free PDA coating. Duplex PEO/PDA coatings reveal high bioactivity compared to PEO coating, owing to electrostatic interaction between PDA top-layer and calcium and phosphate ions as well as high hydrophilicity of coatings. In addition, duplex PEO/PDA coatings also show improved and more stable protective performance than the PEO and bare alloy, depending on the PDA deposition parameters. Noticeably, the corrosion current density of the 120T-1C decreases one orders of magnitude compared to PEO. In addition, the presence of a broad passivation region in the anodic polarization branch shows durable self-healing property via Zipper-like mechanism, demonstrating the duplex coating could preserve promising corrosion resistance.Furthermore, the cytocompatibility of duplex coated samples is also confirmed via interaction with MG63 cells. In summary, the PEO/PDA coating with great corrosion protection, self-healing ability, bioactivity and biocompatibility could be a promising candidate for degradable magnesium-based implants.
文摘Duplex NiP/TiN coatings consisting of the electroless intermediate layers and the physical vapor deposition(PVD) top layers were fabricated on the AA6061 aluminum alloy in order to enhance the load bearing capacity. The main objective of this study was to model the load bearing based on the thickness, adhesion and elastic modulus of the coatings. For this purpose, partial least square(PLS) and support vector regression(SVR) approaches were employed.The results showed that both models had an acceptable performance;however, the PLS model outperformed SVR. The correlation coefficients between thickness, adhesion and elastic modulus with load bearing were 0.841, 0.8092 and 0.7657, respectively;so, thickness had the greatest effect on the load bearing capacity. The composition and structure of the samples were evaluated using XRD and SEM. The load capacity of the coated samples was also discussed based on the wear and adhesion evaluations. Dry sliding wear tests, under a load of 2 N and a sliding distance of 100 m,demonstrated the complete destruction of the coated specimens with low load capacity. The samples with high load capacity showed not only a superior tribological performance, but also a remarkable adhesion according to the Rockwell superficial hardness test.
基金the financial support of the Iran National Science Foundation INSF (Grant No. 97014179)supported by RTI2018-096391-B-C33 (MCIU/AEI/FEDER, UE) and S2018/NMT4411 (Regional government of Madrid and EU Structural and Social Funds)+1 种基金the support of RYC-2017-21843financial support from the Spanish National Science Foundation (CSIC) and the Ministerio de Ciencia, Innovacióny Universidades (MINECO) grant number RTI2018-096328-B-I00。
文摘This study investigated the effects of multi-walled carbon nanotubes(MWCNTs) and polycaprolactone(PCL) on the quasi-in vivo corrosion behavior of AZ31B Mg alloy treated by plasma electrolytic oxidation(PEO). Thin(~2 μm, PCTPCL4) and thick(~60 μm, PCTPCL6) PCL layers were applied only onto the MWCNTs-PEO coating(PCT) as it showed better corrosion performance. Findings reveal that incorporation of MWCNTs induced several structural and functional modifications in the PEO coating, such as increased roughness, a thicker inner barrier layer, and reduced hydrophilicity.Quasi-in vivo corrosion testing was carried out under controlled temperature, p H, and fluid flow in simulated body fluid(SBF) by electrochemical impedance spectroscopy(EIS) and hydrogen evolution experiments. EIS results revealed that, after 48 h immersion, a diffusion process controlled hydration of the ceramic coatings. Comparison of the collected hydrogen after 15 days of immersion in the quasi-in vivo environment revealed that the PEO and PCT ceramic coatings decreased hydrogen generation by up to 74% and 91%, respectively, compared to non-coated alloy.PCTPCL6 coating exhibited the lowest amount of collected hydrogen(0.2 m L/cm^(2)). The thick PCL layer delayed the onset of substrate corrosion for at least 120 h, reducing the corrosion rate by 85% compared with the PCT.
基金financially supported by the Invited Collaborative Research Program(ICRP),Center for International Scientific Studies and Collaboration,Ministry of Science,Research and Technology of Iran。
文摘In this work, two types of CP Ti cubes with similar volumetric energy densities(VED) but diff erent process parameters were produced using laser powder bed fusion(LPBF) method. The corrosion behavior of the fabricated specimens was investigated by conducting electrochemical impedance spectroscopy(EIS) and polarization experiments in simulated body fl uid(SBF) solution at 37 °C. The results indicated that the microstructure and porosities, which are of great importance for biomedical applications, can be controlled by changing the process parameters even under constant energy densities. The sample produced with a lower laser power(E1) was featured with a higher level of porosity and thinner alpha laths, as compared with the sample fabricated with a higher laser power(E2). Moreover, results obtained from the bioactivity tests revealed that the sample produced with a higher laser power conferred a slight improvement in the bioactivity due to the higher amount of porosity. Lower laser power and hence higher porosity level promoted the formation of bone-like apatite on the surface of the printed specimens. The potentiodynamic polarization tests revealed inferior corrosion resistance for the fabricated sample with higher porosity. Moreover, the EIS results after diff erent immersion times indicated that a stable oxide film was formed on the surface of samples for all immersion times. After 1 and 3 days of immersion, superior passivation behavior was observed for the sample fabricated with lower laser power. However, very similar impedance and phase values were observed for all the samples after 14 days of immersion.
