The mineral composition of the sinter affects the quality of cold-bonded briquettes(CBB),which are prepared from returned sinter fines and serve as a cleaner blast furnace charge.Pulverization rate,compressive strengt...The mineral composition of the sinter affects the quality of cold-bonded briquettes(CBB),which are prepared from returned sinter fines and serve as a cleaner blast furnace charge.Pulverization rate,compressive strength,reduction disintegration index(RDI)and compressive strength after reduction experiment were tested to analyze the experimental parameters of CBB under the influence of different basicities and sintering time.The results show that when the basicity of CBB is increased from 0.5 to 1.5,the pulverization rate increases,and performance indexes such as compressive strength,RDI,and compressive strength exhibit a decreasing trend.When the basicity is increased from 1.5 to 3.0,all the aforementioned performance indexes are improved.When the sintering time is extended from 0 to 8 h,the properties mentioned above are improved.The results of X-ray diffraction,microstructure,and thermodynamic calculations confirm that the hematite in the mineral composition of CBB tends to convert into calcium ferrite,which leads to the increased compressive strength of CBB.The reasonable basicity and sintering time during sinter preparation not only form the desired mineral composition but also improve the properties of the CBB.展开更多
The influence of microwave treatment on the liberation of iron ore from the high phosphorus oolitic iron ore from Aswan region, Egypt was studied. The effect of microwave power, exposure time and grain size on the lib...The influence of microwave treatment on the liberation of iron ore from the high phosphorus oolitic iron ore from Aswan region, Egypt was studied. The effect of microwave power, exposure time and grain size on the liberation of iron ore was investigated. The microfractures and cracks of the samples were characterized before and after microwave treatments. The heating rate of high phosphorus oolitic iron ore was studied. Crystallinity of hematite was characterized before and after microwave pretreatment. The results indicated that intergranular fractures formed between the gangues (fluorapatite and chamosite) and hematite after microwave treatment, leading to improved liberation of iron ore and a significant reduction in comminution energy. Percentages of fraction ≤ -0.125 mm increased from 46.6% to 59.76% with increased exposure time from 0 to 60 seconds. The heating rate of iron ore showed that microwave treatment was less efficient at smaller particle sizes for a fixed applied power density. Crystallinity of hematite increased with the microwave exposure time.展开更多
The present study aims to give a detailed characterization of blast furnace sludge (BFS) by using different techniques, in order to determine the most effective recycling method to recover valuable metals from this wa...The present study aims to give a detailed characterization of blast furnace sludge (BFS) by using different techniques, in order to determine the most effective recycling method to recover valuable metals from this waste. BFS is composed mainly of hematite, as its iron-bearing phase, and carbon, in addition to fractions of silicate and carbonate materials. The studied BFS shows relatively high contents of iron (Fe) (390 g.kg-1), and carbon (C) (290 g.kg-1), due to abundance of hematite and coke, while the concentration of zinc (Zn) (2.5 g.kg-1) is low. The XRD analyses indicated that, hematite is more concentrated in the fine fraction (<20 μm), while the coarser fraction (90 - 250 μm) is dominated by calcite, quartz and X-ray amorphous coke. SEM-EDX analyses confirmed that particles rich in iron and zinc were detected in the fine fraction (<20 μm) of the sludge. Due to high Fe and C content in BFS, it can be utilized as self-reducing material and briquetting represent a potential method for recycling of blast furnace sludge.展开更多
基金supported by Distinguished Professor(Tracking Plan)of Oriental Scholars of Shanghai Universities(Grant No.GZ2020013)National 111 Project(The Program of Introducing Talents of Discipline to University)(Grant No.Dl7002)+1 种基金Independent Research Project of State Key Laboratory of Advanced Special Steel Shanghai Key Laboratory of Advanced Ferrometallurgy and Shanghai University(Grant No.SKLASS 2022-Z011)Additionally,the authors are appreciative of the funding from the Academy of Finland with Grant No.349833.
文摘The mineral composition of the sinter affects the quality of cold-bonded briquettes(CBB),which are prepared from returned sinter fines and serve as a cleaner blast furnace charge.Pulverization rate,compressive strength,reduction disintegration index(RDI)and compressive strength after reduction experiment were tested to analyze the experimental parameters of CBB under the influence of different basicities and sintering time.The results show that when the basicity of CBB is increased from 0.5 to 1.5,the pulverization rate increases,and performance indexes such as compressive strength,RDI,and compressive strength exhibit a decreasing trend.When the basicity is increased from 1.5 to 3.0,all the aforementioned performance indexes are improved.When the sintering time is extended from 0 to 8 h,the properties mentioned above are improved.The results of X-ray diffraction,microstructure,and thermodynamic calculations confirm that the hematite in the mineral composition of CBB tends to convert into calcium ferrite,which leads to the increased compressive strength of CBB.The reasonable basicity and sintering time during sinter preparation not only form the desired mineral composition but also improve the properties of the CBB.
文摘The influence of microwave treatment on the liberation of iron ore from the high phosphorus oolitic iron ore from Aswan region, Egypt was studied. The effect of microwave power, exposure time and grain size on the liberation of iron ore was investigated. The microfractures and cracks of the samples were characterized before and after microwave treatments. The heating rate of high phosphorus oolitic iron ore was studied. Crystallinity of hematite was characterized before and after microwave pretreatment. The results indicated that intergranular fractures formed between the gangues (fluorapatite and chamosite) and hematite after microwave treatment, leading to improved liberation of iron ore and a significant reduction in comminution energy. Percentages of fraction ≤ -0.125 mm increased from 46.6% to 59.76% with increased exposure time from 0 to 60 seconds. The heating rate of iron ore showed that microwave treatment was less efficient at smaller particle sizes for a fixed applied power density. Crystallinity of hematite increased with the microwave exposure time.
文摘The present study aims to give a detailed characterization of blast furnace sludge (BFS) by using different techniques, in order to determine the most effective recycling method to recover valuable metals from this waste. BFS is composed mainly of hematite, as its iron-bearing phase, and carbon, in addition to fractions of silicate and carbonate materials. The studied BFS shows relatively high contents of iron (Fe) (390 g.kg-1), and carbon (C) (290 g.kg-1), due to abundance of hematite and coke, while the concentration of zinc (Zn) (2.5 g.kg-1) is low. The XRD analyses indicated that, hematite is more concentrated in the fine fraction (<20 μm), while the coarser fraction (90 - 250 μm) is dominated by calcite, quartz and X-ray amorphous coke. SEM-EDX analyses confirmed that particles rich in iron and zinc were detected in the fine fraction (<20 μm) of the sludge. Due to high Fe and C content in BFS, it can be utilized as self-reducing material and briquetting represent a potential method for recycling of blast furnace sludge.
