The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respect...The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respectively. Based on solving a multi-term electron Boltz- mann equation the calculations use improved electron-gas collision cross sections for twelve SF6 dissociation products with a particular emphasis on the electron-vibrating molecule interactions. The ion kinetics is also considered and its role on the critical field becomes non negligible as the temperature is above 2000 K. These critical fields are then used in hydrodynamics simulations which correctly predict the circuit breaker behaviours observed in the case of breaking tests.展开更多
Two experimental techniques have been used to quantify the atomic oxygen density in the case of hot air plasma generated by a microwave （MW） resonant cavity. The latter operates at a frequency of 2.45 GHz inside a c...Two experimental techniques have been used to quantify the atomic oxygen density in the case of hot air plasma generated by a microwave （MW） resonant cavity. The latter operates at a frequency of 2.45 GHz inside a cell of gas conditioning at a pressure of 600 mbar, an injected air flow of 12 L/min and an input MW power of 1 kW. The first technique is based on the standard two photon absorption laser induced fluorescence （TALIF） using xenon for calibration but applied for the first time in the present post discharge hot air plasma column having a temperature of about 4500 K near the axis of the nozzle. The second diagnostic technique is an actinometry method based on optical emission spectroscopy （OES）. In this case, we compared the spectra intensities of a specific atomic oxygen line （844 nm） and the closest wavelength xenon line （823 nm）. The two lines need to be collected under absolutely the same spectroscopic parameters. The xenon emission is due to the addition of a small proportion of xenon （1% Xe） of this chemically inert gas inside the air while a further small quantity of H2 （2~） is also added in the mixture in order to collect OH（A- X） and NH（A-X） spectra without noise. The latter molecular spectra are required to estimate gas and excitation temperatures. Optical emission spectroscopy measurements, at for instance the position z=12 mm on the axis plasma column that leads to a gas measured temperature equal to 3500 K, an excitation temperature of about 9500 K and an atomic oxygen density 2.09× 1017＋ 0.2×1017 cm-3. This is in very good agreement with the TALIF measurement, which is equal to 2.0×101T cm-3.展开更多
The non-thermal plasma technology is a promising technique to treat SO2 and NOx. Chemical radicals produced with this technology can remove several pollutants at atmospheric pressure in a very short period of time sim...The non-thermal plasma technology is a promising technique to treat SO2 and NOx. Chemical radicals produced with this technology can remove several pollutants at atmospheric pressure in a very short period of time simultaneously. Both theoretical and experimental study on SO2 and NOx removal, by a dielectric barrier discharge （DBD） with corona effect, is presented.展开更多
文摘The critical electric fields of hot SF6 are calculated including both electron and ion kinetics in wide ranges of temperature and pressure, namely from 300 K up to 4000 K and 2 atmospheres up to 32 atmospheres respectively. Based on solving a multi-term electron Boltz- mann equation the calculations use improved electron-gas collision cross sections for twelve SF6 dissociation products with a particular emphasis on the electron-vibrating molecule interactions. The ion kinetics is also considered and its role on the critical field becomes non negligible as the temperature is above 2000 K. These critical fields are then used in hydrodynamics simulations which correctly predict the circuit breaker behaviours observed in the case of breaking tests.
文摘Two experimental techniques have been used to quantify the atomic oxygen density in the case of hot air plasma generated by a microwave （MW） resonant cavity. The latter operates at a frequency of 2.45 GHz inside a cell of gas conditioning at a pressure of 600 mbar, an injected air flow of 12 L/min and an input MW power of 1 kW. The first technique is based on the standard two photon absorption laser induced fluorescence （TALIF） using xenon for calibration but applied for the first time in the present post discharge hot air plasma column having a temperature of about 4500 K near the axis of the nozzle. The second diagnostic technique is an actinometry method based on optical emission spectroscopy （OES）. In this case, we compared the spectra intensities of a specific atomic oxygen line （844 nm） and the closest wavelength xenon line （823 nm）. The two lines need to be collected under absolutely the same spectroscopic parameters. The xenon emission is due to the addition of a small proportion of xenon （1% Xe） of this chemically inert gas inside the air while a further small quantity of H2 （2~） is also added in the mixture in order to collect OH（A- X） and NH（A-X） spectra without noise. The latter molecular spectra are required to estimate gas and excitation temperatures. Optical emission spectroscopy measurements, at for instance the position z=12 mm on the axis plasma column that leads to a gas measured temperature equal to 3500 K, an excitation temperature of about 9500 K and an atomic oxygen density 2.09× 1017＋ 0.2×1017 cm-3. This is in very good agreement with the TALIF measurement, which is equal to 2.0×101T cm-3.
文摘The non-thermal plasma technology is a promising technique to treat SO2 and NOx. Chemical radicals produced with this technology can remove several pollutants at atmospheric pressure in a very short period of time simultaneously. Both theoretical and experimental study on SO2 and NOx removal, by a dielectric barrier discharge （DBD） with corona effect, is presented.
