期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Reactive destabilization and bidirectional catalyzation for reversible hydrogen storage of LiBH_(4) by novel waxberry-like nano-additive assembled from ultrafine Fe_(3)O_(4) particles 被引量:1
1
作者 S.Wang M.H.Wu +5 位作者 Y.Y.Zhu Z.L.Li Y.X.Yang Y.Z.Li H.F.Liu m.x.gao 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2024年第6期63-71,共9页
LiBH_(4) containing 18.5 wt.%H_(2) is an attractive high-capacity hydrogen storage material,however,it suffers from high operation temperature and poor reversibility.Herein,a novel and low-cost bifunctional additive,w... LiBH_(4) containing 18.5 wt.%H_(2) is an attractive high-capacity hydrogen storage material,however,it suffers from high operation temperature and poor reversibility.Herein,a novel and low-cost bifunctional additive,waxberry-like Fe_(3)O_(4) secondary nanospheres assembled from ultrafine primary Fe_(3)O_(4) nanoparticles,is synthesized,which exhibits significant destabilization and bidirectional catalyzation towards(de)hydrogenation of LiBH_(4).With an optimized addition of 30 wt.% waxberry-like Fe_(3)O_(4),the system initiated dehydrogenation below 100℃ and released a total of 8.1 wt.%H_(2) to 400℃.After 10 cycles,a capacity retention of 70% was achieved,greatly superior to previously reported oxides-modified systems.The destabilizing and catalyzing mechanisms of waxberry-like Fe_(3)O_(4) on LiBH_(4) were systematically analyzed by phase and microstructural evolutions during dehydrogenation and hydrogenation cycling as well as density functional theory(DFT)calculations.The present work provides new insights in developing advanced nano-additives with unique structural and multifunctional designs towards LiBH4 hydrogen storage. 展开更多
关键词 LiBH_(4) Hydrogen storage Waxberry-like Fe_(3)O_(4) DESTABILIZATION Catalysis
原文传递
区域地震滑坡体积优化模型 被引量:2
2
作者 C.Xu X.W.Xu +10 位作者 L.L.Shen Q.Yao X.B.Tan W.J.Kang S.Y.Ma X.Y.Wu J.T.Cai m.x.gao K.Li 许冲(译) 吕春来(校) 《世界地震译丛》 2018年第3期287-299,共13页
求取滑坡体积在当前是一个难题,原因是其为三维分量,并且部分滑面往往在地下。本文提出了3个区域地震滑坡体积优化模型来计算2008年中国汶川M W7.9地震触发滑坡的体积。本文首先基于20m分辨率的震前和震后SPOT 5卫星影像提取到的数字高... 求取滑坡体积在当前是一个难题,原因是其为三维分量,并且部分滑面往往在地下。本文提出了3个区域地震滑坡体积优化模型来计算2008年中国汶川M W7.9地震触发滑坡的体积。本文首先基于20m分辨率的震前和震后SPOT 5卫星影像提取到的数字高程模型(DEM)数据,结合少数滑坡的剖面图,获得了1 415处汶川地震滑坡堆积区体积,作为地震滑坡体积模型训练样本。在常规区域滑坡"体积—面积"模型基础上,提出了3个优化模型。分别利用数据的对数化线性拟合与直接非线性拟合方法对1个常规模型和3个优化模型进行拟合。结果表明,采用直接非线性拟合方法并考虑了滑坡长、宽、高、岩性、坡度和峰值地动加速度后,坡向的优化模型标准误差最小,回归得到的滑坡总体积与滑坡真实总体积也非常接近。将这一模型应用于所有汶川地震滑坡,分别得到每个滑坡的体积。最终结果表明,汶川地震滑坡相对密集分布区内的196 007处滑坡的堆积物体积约为1.2×1010 m^3,源区体积约为1×1010 m^3。根据前人"地震震级—滑坡总体积"经验公式得到的结果仅仅是本文结果的7.5%~9%,这提醒我们有必要基于更多的单次地震触发滑坡总体体积数据对"地震震级—滑坡总体积"的关系进行更新。同时,文中的优化模型对同类研究也有显著的参考价值。 展开更多
关键词 地震滑坡 体积模型 优化模型 数字高程模型 拟合方法 地震触发 地震震级 SPOT
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部