This paper presents the development of a bioinspired multifunctional flexible optical sensor(BioMFOS)as an ultrasensitive tool for force(intensity and location)and orientation sensing.The sensor structure is bioinspir...This paper presents the development of a bioinspired multifunctional flexible optical sensor(BioMFOS)as an ultrasensitive tool for force(intensity and location)and orientation sensing.The sensor structure is bioinspired in orb webs,which are multifunctional devices for prey capturing and vibration transmission.The multifunctional feature of the structure is achieved by using transparent resins that present both mechanical and optical properties for structural integrity and strain/deflection transmission as well as the optical signal transmission properties with core/cladding configuration of a waveguide.In this case,photocurable and polydimethylsiloxane(PDMS)resins are used for the core and cladding,respectively.The optical transmission,tensile tests,and dynamic mechanical analysis are performed in the resins and show the possibility of light transmission at the visible wavelength range in conjunction with high flexibility and a dynamic range up to 150 Hz,suitable for wearable applications.The BioMFOS has small dimensions(around 2 cm)and lightweight(0.8 g),making it suitable for wearable application and clothing integration.Characterization tests are performed in the structure by means of applying forces at different locations of the structure.The results show an ultra-high sensitivity and resolution,where forces in theμN range can be detected and the location of the applied force can also be detected with a sub-millimeter spatial resolution.Then,the BioMFOS is tested on the orientation detection in 3D plane,where a correlation coefficient higher than 0.9 is obtained when compared with a gold-standard inertial measurement unit(IMU).Furthermore,the device also shows its capabilities on the movement analysis and classification in two protocols:finger position detection(with the BioMFOS positioned on the top of the hand)and trunk orientation assessment(with the sensor integrated on the clothing).In both cases,the sensor is able of classifying the movement,especially when analyzed in conjunction with preprocessing and clustering techniques.As another wearable application,the respiratory rate is successfully estimated with the BioMFOS integrated into the clothing.Thus,the proposed multifunctional device opens new avenues for novel bioinspired photonic devices and can be used in many applications of biomedical,biomechanics,and micro/nanotechnology.展开更多
In the food production sector,quickly identifying potential hazards is crucial due to the resilience of many pathogens,which could lead to wasted production results and,more severely,epidemic outbreaks.E.coli monitori...In the food production sector,quickly identifying potential hazards is crucial due to the resilience of many pathogens,which could lead to wasted production results and,more severely,epidemic outbreaks.E.coli monitoring is essential;however,traditional quality control methods in fish farming are often slow and intrusive,thus promoting an increase in fish stress and mortality rates.This paper presents an alternative method by utilizing a prototype inspired by polarized optical microscopy(POM),constructed with a Raspberry Pi microprocessor to assess pixel patterns and calculate analyte levels.展开更多
基金FAPES(320/2020 and 84336650)CNPq(304049/2019-0 and 427054/2018-4)+2 种基金Fundação para a Ciência e a Tecnologia(FCT)through the DigiAqua project-PTDC/EEIEEE/0415/2021.C.FCT through the CEECIND/00034/2018(iFish project)developed within the scope of the project i3N,UIDB/50025/2020&UIDP/50025/2020financed by national funds through the FCT/MEC.
文摘This paper presents the development of a bioinspired multifunctional flexible optical sensor(BioMFOS)as an ultrasensitive tool for force(intensity and location)and orientation sensing.The sensor structure is bioinspired in orb webs,which are multifunctional devices for prey capturing and vibration transmission.The multifunctional feature of the structure is achieved by using transparent resins that present both mechanical and optical properties for structural integrity and strain/deflection transmission as well as the optical signal transmission properties with core/cladding configuration of a waveguide.In this case,photocurable and polydimethylsiloxane(PDMS)resins are used for the core and cladding,respectively.The optical transmission,tensile tests,and dynamic mechanical analysis are performed in the resins and show the possibility of light transmission at the visible wavelength range in conjunction with high flexibility and a dynamic range up to 150 Hz,suitable for wearable applications.The BioMFOS has small dimensions(around 2 cm)and lightweight(0.8 g),making it suitable for wearable application and clothing integration.Characterization tests are performed in the structure by means of applying forces at different locations of the structure.The results show an ultra-high sensitivity and resolution,where forces in theμN range can be detected and the location of the applied force can also be detected with a sub-millimeter spatial resolution.Then,the BioMFOS is tested on the orientation detection in 3D plane,where a correlation coefficient higher than 0.9 is obtained when compared with a gold-standard inertial measurement unit(IMU).Furthermore,the device also shows its capabilities on the movement analysis and classification in two protocols:finger position detection(with the BioMFOS positioned on the top of the hand)and trunk orientation assessment(with the sensor integrated on the clothing).In both cases,the sensor is able of classifying the movement,especially when analyzed in conjunction with preprocessing and clustering techniques.As another wearable application,the respiratory rate is successfully estimated with the BioMFOS integrated into the clothing.Thus,the proposed multifunctional device opens new avenues for novel bioinspired photonic devices and can be used in many applications of biomedical,biomechanics,and micro/nanotechnology.
基金European Commission(CZ.10.03.01/00/22-003/0000048)Fundacao para a Ciencia e a Tecnologia(PTDC/EEI-EEE/0415/2021),CICECO(UIDB/50011/2020,UIDP/50011/2020,LA/P/0006/2020)+1 种基金VSB-Technical University of Ostrava(SP2025/039)FCT/MCTES(UI/BD/153066/2022)。
文摘In the food production sector,quickly identifying potential hazards is crucial due to the resilience of many pathogens,which could lead to wasted production results and,more severely,epidemic outbreaks.E.coli monitoring is essential;however,traditional quality control methods in fish farming are often slow and intrusive,thus promoting an increase in fish stress and mortality rates.This paper presents an alternative method by utilizing a prototype inspired by polarized optical microscopy(POM),constructed with a Raspberry Pi microprocessor to assess pixel patterns and calculate analyte levels.
