Fatigue and tensile behaviors of homogenized WE 54 magnesium alloy before and after immersion in simulated body fluid(SBF)were investigated.According to the tensile test,the alloy without immersion in SBF solution has...Fatigue and tensile behaviors of homogenized WE 54 magnesium alloy before and after immersion in simulated body fluid(SBF)were investigated.According to the tensile test,the alloy without immersion in SBF solution has the highest tensile strength of 278 MPa,which decreased to 190 MPa after 336 h of immersion..The fatigue life of the homogenized WE 54 magnesium alloy before immersion in the SBF solution under a constant stress of 15 MPa is 3598 cycles.However,the fatigue life of the alloy decreased to 453 cycles after 336 h of immersion in the SBF solution under the same stress.Examination of the fracture surface of the samples by SEM reveals that the origin of the fatigue crack before immersion is micro-pores and defects.While corrosion pits and cracks are the main reasons for forming the initial fatigue crack after immersion.Moreover,the results obtained from practical work were evaluated and compared to theoretical calculations.The area of the hysteresis loops of the samples after the fatigue test,determined using Triangles and Monte Carlo methods,decreased from 4954.5 MPa and 4842.9 MPa before immersion to 192.0 MPa and 175.8 MPa after 336 h of immersion,respectively.展开更多
Pure titanium samples were aluminized at 950,1025 and 1100 ℃ for 0-6 h in a pack containing 10%Al＋5%NaF＋85%Al2O3 in mass traction.The aluminized layers formed on the samples were characterized.The kinetic studies i...Pure titanium samples were aluminized at 950,1025 and 1100 ℃ for 0-6 h in a pack containing 10%Al＋5%NaF＋85%Al2O3 in mass traction.The aluminized layers formed on the samples were characterized.The kinetic studies indicated that the diffusion of Al-bearing gases through the pack is the rate-controlling step in this process.The activation energy of 161.8 kJ/mol was calculated for this step.In addition,the mass gains of the aluminized samples were predicted using the partial pressures of gases in the pack and those adjacent to the samples surface.The predicted values are in good agreement wim the experimental measurements at 950 ℃ but are higher than those measured at 1025 and 1100 ℃.展开更多
文摘Fatigue and tensile behaviors of homogenized WE 54 magnesium alloy before and after immersion in simulated body fluid(SBF)were investigated.According to the tensile test,the alloy without immersion in SBF solution has the highest tensile strength of 278 MPa,which decreased to 190 MPa after 336 h of immersion..The fatigue life of the homogenized WE 54 magnesium alloy before immersion in the SBF solution under a constant stress of 15 MPa is 3598 cycles.However,the fatigue life of the alloy decreased to 453 cycles after 336 h of immersion in the SBF solution under the same stress.Examination of the fracture surface of the samples by SEM reveals that the origin of the fatigue crack before immersion is micro-pores and defects.While corrosion pits and cracks are the main reasons for forming the initial fatigue crack after immersion.Moreover,the results obtained from practical work were evaluated and compared to theoretical calculations.The area of the hysteresis loops of the samples after the fatigue test,determined using Triangles and Monte Carlo methods,decreased from 4954.5 MPa and 4842.9 MPa before immersion to 192.0 MPa and 175.8 MPa after 336 h of immersion,respectively.
文摘Pure titanium samples were aluminized at 950,1025 and 1100 ℃ for 0-6 h in a pack containing 10%Al＋5%NaF＋85%Al2O3 in mass traction.The aluminized layers formed on the samples were characterized.The kinetic studies indicated that the diffusion of Al-bearing gases through the pack is the rate-controlling step in this process.The activation energy of 161.8 kJ/mol was calculated for this step.In addition,the mass gains of the aluminized samples were predicted using the partial pressures of gases in the pack and those adjacent to the samples surface.The predicted values are in good agreement wim the experimental measurements at 950 ℃ but are higher than those measured at 1025 and 1100 ℃.
