AZ31B magnesium alloy and nano-composite were manufactured by hybrid casting process and hot extruded at 350 °C. The sliding wear behaviour of alloy and nano-composite was estimated at room temperature using the ...AZ31B magnesium alloy and nano-composite were manufactured by hybrid casting process and hot extruded at 350 °C. The sliding wear behaviour of alloy and nano-composite was estimated at room temperature using the standard pin-on-disc wear test equipment. The tests were conducted under a normal load of 10 N at different sliding speeds ranging from 0.60 to 1.2 m/s for distance up to 2000 m. The wear mechanisms of the worn out surface were studied using SEM analysis. The influence of test parameters on wear rate of the pins was established using a linear regression model statistically. Compared with the AZ31B magnesium alloy, the nano-composite shows lower wear rates due to higher hardness improvement caused by the reinforcement. The wear mechanism appears to be a mix-up of ploughing, rows of furrows, delamination and oxidation.展开更多
In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact...In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact of ambient pressure on the plasma temperature,electron density and plasma lifetime was studied.Lifetime variations of the plasma produced under different experimental conditions were analyzed.The produced nanoparticles were characterized through wide angle X-ray diffraction（WAXD） and transmission electron microscopy（TEM） studies. Particles produced with a negative DC charging voltage had a larger mean size when compared to a positive charging voltage.Polarity dependence on the plasma duration was observed where plasma was sustained for a longer duration with a negative DC charging voltage.展开更多
文摘AZ31B magnesium alloy and nano-composite were manufactured by hybrid casting process and hot extruded at 350 °C. The sliding wear behaviour of alloy and nano-composite was estimated at room temperature using the standard pin-on-disc wear test equipment. The tests were conducted under a normal load of 10 N at different sliding speeds ranging from 0.60 to 1.2 m/s for distance up to 2000 m. The wear mechanisms of the worn out surface were studied using SEM analysis. The influence of test parameters on wear rate of the pins was established using a linear regression model statistically. Compared with the AZ31B magnesium alloy, the nano-composite shows lower wear rates due to higher hardness improvement caused by the reinforcement. The wear mechanism appears to be a mix-up of ploughing, rows of furrows, delamination and oxidation.
文摘In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact of ambient pressure on the plasma temperature,electron density and plasma lifetime was studied.Lifetime variations of the plasma produced under different experimental conditions were analyzed.The produced nanoparticles were characterized through wide angle X-ray diffraction（WAXD） and transmission electron microscopy（TEM） studies. Particles produced with a negative DC charging voltage had a larger mean size when compared to a positive charging voltage.Polarity dependence on the plasma duration was observed where plasma was sustained for a longer duration with a negative DC charging voltage.
