Tightly focused proton beams generated from helical coil targets have been shown to be highly collimated across small distances, and display characteristic spectral bunching. We show, for the first time, proton spectr...Tightly focused proton beams generated from helical coil targets have been shown to be highly collimated across small distances, and display characteristic spectral bunching. We show, for the first time, proton spectra from such targets at high resolution via a Thomson parabola spectrometer. The proton spectral peaks reach energies above 50 MeV, with cutoffs approaching 70 MeV and particle numbers greater than 10^(10). The spectral bunch width has also been measured as low as approximately 8.5 MeV(17% energy spread). The proton beam pointing and divergence measured at metrescale distances are found to be stable with the average pointing stability below 10 mrad, and average half-angle beam divergences of approximately 6 mrad. Evidence of the influence of the final turn of the coil on beam pointing over long distances is also presented, corroborated by particle tracing simulations, indicating the scope for further improvement and control of the beam pointing with modifying target parameters.展开更多
Filamentary structures can form within the beam of protons accelerated during the interaction of an intense laser pulse with an ultrathin foil target. Such behaviour is shown to be dependent upon the formation time of...Filamentary structures can form within the beam of protons accelerated during the interaction of an intense laser pulse with an ultrathin foil target. Such behaviour is shown to be dependent upon the formation time of quasi-static magnetic field structures throughout the target volume and the extent of the rear surface proton expansion over the same period.This is observed via both numerical and experimental investigations. By controlling the intensity profile of the laser drive,via the use of two temporally separated pulses, both the initial rear surface proton expansion and magnetic field formation time can be varied, resulting in modification to the degree of filamentary structure present within the laser-driven proton beam.展开更多
The ultrafast charge dynamics following the interaction of an ultra-intense laser pulse with a foil target leads to the launch of an ultra-short, intense electromagnetic(EM) pulse along a wire connected to the target....The ultrafast charge dynamics following the interaction of an ultra-intense laser pulse with a foil target leads to the launch of an ultra-short, intense electromagnetic(EM) pulse along a wire connected to the target. Due to the strong electric field(of the order of GV m^(-1)) associated to such laser-driven EM pulses, these can be exploited in a travelling-wave helical geometry for controlling and optimizing the parameters of laser accelerated proton beams. The propagation of the EM pulse along a helical path was studied by employing a proton probing technique. The pulse-carrying coil was probed along two orthogonal directions, transverse and parallel to the coil axis. The temporal profile of the pulse obtained from the transverse probing of the coil is in agreement with the previous measurements obtained in a planar geometry. The data obtained from the longitudinal probing of the coil shows a clear evidence of an energy dependent reduction of the proton beam divergence, which underpins the mechanism behind selective guiding of laser-driven ions by the helical coil targets.展开更多
The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for ...The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation,although to-date this has been the accepted methodology due to low data acquisition rates.High repetition-rate(HRR)lasers augmented by machine learning present a valuable opportunity for efficient source optimization.Here,an automated,HRR-compatible system produced high-fidelity parameter scans,revealing the influence of laser intensity on target pre-heating and proton generation.A closed-loop Bayesian optimization of maximum proton energy,through control of the laser wavefront and target position,produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60%of the laser energy.This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.展开更多
We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was meas...We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was measured to be stable on the sub-micrometre scale,compatible with the high-numerical aperture focusing geometries required to achieve relativistic intensity interactions with the pulse energy available in current multi-Hz and near-future higher repetition-rate lasers(>kHz).Long-term drift was characterized at 100 Hz demonstrating suitability for operation over extended periods.The target was continuously operated at up to 5 Hz in a recent experiment for 70,000 shots without intervention by the experimental team,with the exception of tape replacement,producing the largest data-set of relativistically intense laser–solid foil measurements to date.This tape drive provides robust targetry for the generation and study of high-repetitionrate ion beams using next-generation high-power laser systems,also enabling wider applications of laser-driven proton sources.展开更多
基金funding from EPSRC(EP/P010059/1 and EP/K022415/1)the IMPULSE project by the European Union Framework Program for Research and Innovation Horizon 2020(grant agreement No.871161)+1 种基金support of the target fabrication and mechanical engineering staff of the Central Laser Facility,STFC,UKKelvin2 cluster at the Northern Ireland High Performance Computing(NI-HPC)facility funded by EPSRC(EP/T022175)for providing computational resources
文摘Tightly focused proton beams generated from helical coil targets have been shown to be highly collimated across small distances, and display characteristic spectral bunching. We show, for the first time, proton spectra from such targets at high resolution via a Thomson parabola spectrometer. The proton spectral peaks reach energies above 50 MeV, with cutoffs approaching 70 MeV and particle numbers greater than 10^(10). The spectral bunch width has also been measured as low as approximately 8.5 MeV(17% energy spread). The proton beam pointing and divergence measured at metrescale distances are found to be stable with the average pointing stability below 10 mrad, and average half-angle beam divergences of approximately 6 mrad. Evidence of the influence of the final turn of the coil on beam pointing over long distances is also presented, corroborated by particle tracing simulations, indicating the scope for further improvement and control of the beam pointing with modifying target parameters.
基金supported by EPSRC(grants EP/J003832/1,EP/R006202/1,EP/P007082/1 and EP/K022415/1)the European Unions Horizon 2020 research and innovation program(grant agreement No.654148 Laserlab-Europe)EPSRC grant EP/G054940/1
文摘Filamentary structures can form within the beam of protons accelerated during the interaction of an intense laser pulse with an ultrathin foil target. Such behaviour is shown to be dependent upon the formation time of quasi-static magnetic field structures throughout the target volume and the extent of the rear surface proton expansion over the same period.This is observed via both numerical and experimental investigations. By controlling the intensity profile of the laser drive,via the use of two temporally separated pulses, both the initial rear surface proton expansion and magnetic field formation time can be varied, resulting in modification to the degree of filamentary structure present within the laser-driven proton beam.
基金funding from EPSRC,[EP/J002550/1-Career Acceleration Fellowship held by S.K.,EP/L002221/1,EP/K022415/1,and EP/I029206/1],SBFTR18 and GRK1203,EC-GA284464 and Invest Northern Ireland(POC-329)
文摘The ultrafast charge dynamics following the interaction of an ultra-intense laser pulse with a foil target leads to the launch of an ultra-short, intense electromagnetic(EM) pulse along a wire connected to the target. Due to the strong electric field(of the order of GV m^(-1)) associated to such laser-driven EM pulses, these can be exploited in a travelling-wave helical geometry for controlling and optimizing the parameters of laser accelerated proton beams. The propagation of the EM pulse along a helical path was studied by employing a proton probing technique. The pulse-carrying coil was probed along two orthogonal directions, transverse and parallel to the coil axis. The temporal profile of the pulse obtained from the transverse probing of the coil is in agreement with the previous measurements obtained in a planar geometry. The data obtained from the longitudinal probing of the coil shows a clear evidence of an energy dependent reduction of the proton beam divergence, which underpins the mechanism behind selective guiding of laser-driven ions by the helical coil targets.
基金support from the UK STFC grants ST/V001639/1 with the XFEL Physical Sciences Hub and ST/P002021/1the UK EPSRC grants EP/V049577/1 and EP/R006202/1+5 种基金as well as the U.S.DOE Office of Science,Fusion Energy Sciences under FWP No.100182in part by the National Science Foundation under Grant No.1632708 and Award No.PHY–1903414M.J.V.S.acknowledges support from the Royal Society URFR1221874support from the DOE NNSA SSGF program under DE-NA0003960support from the U.S.DOE grant DESC0016804support from the project‘Advanced research using high-intensity laser-produced photons and particles’(CZ.02.1.01/0.0/0.0/16_019/0000789)from the European Regional Development Fund(ADONIS)。
文摘The interaction of relativistically intense lasers with opaque targets represents a highly non-linear,multi-dimensional parameter space.This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation,although to-date this has been the accepted methodology due to low data acquisition rates.High repetition-rate(HRR)lasers augmented by machine learning present a valuable opportunity for efficient source optimization.Here,an automated,HRR-compatible system produced high-fidelity parameter scans,revealing the influence of laser intensity on target pre-heating and proton generation.A closed-loop Bayesian optimization of maximum proton energy,through control of the laser wavefront and target position,produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60%of the laser energy.This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.
基金Special thanks go to the staff at the Central Laser Facility who provided laser operational support,mechanical and electrical support and computational and administrative support throughout the experiment.We acknowledge funding from UK STFC,Grant Nos.ST/P002021/1 and ST/V001639/1U.S.DOE Office of Science,Fusion Energy Sciences under FWP No.100182+2 种基金in part by the National Science Foundation under Grant No.1632708G.D.G.acknowledges support from the DOE NNSA SSGF program under DE-NA0003960This work has been partially supported by the project Advanced Research Using High-intensity Laser-produced Photons and Particles(CZ.02.1.01/0.0/0.0/16_019/0000789)from the European Regional Development Fund(ADONIS).
文摘We present the development and characterization of a high-stability,multi-material,multi-thickness tape-drive target for laser-driven acceleration at repetition rates of up to 100 Hz.The tape surface position was measured to be stable on the sub-micrometre scale,compatible with the high-numerical aperture focusing geometries required to achieve relativistic intensity interactions with the pulse energy available in current multi-Hz and near-future higher repetition-rate lasers(>kHz).Long-term drift was characterized at 100 Hz demonstrating suitability for operation over extended periods.The target was continuously operated at up to 5 Hz in a recent experiment for 70,000 shots without intervention by the experimental team,with the exception of tape replacement,producing the largest data-set of relativistically intense laser–solid foil measurements to date.This tape drive provides robust targetry for the generation and study of high-repetitionrate ion beams using next-generation high-power laser systems,also enabling wider applications of laser-driven proton sources.
