By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution ...By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution is re-vealed by applying a sensitivity conjugated gradients reconstruction method (SCG). Experimental results show that over-all hold-up obtained by ERT is generally in good agreement with those measured with the pressure transducer and the ERT system produces informative evidence that the radial profiles of hold-up is very similar to the sparger design in the lower section of bubble column. Meanwhile, the rise velocity of bubble swarm and the Sauter mean bubble size are evaluated using ERT based on dynamic gas disengagement theory. The experimental results are in good agreement with correlations and conventional estimation obtained using pressure transmitter methods.展开更多
The electrical resistivity of Cu/Ta multilayers deposited by radio-frequency magnetron sputtering on a polyimide substrate was investigated as a function of monolayer thickness. It is found that the resistivity of the...The electrical resistivity of Cu/Ta multilayers deposited by radio-frequency magnetron sputtering on a polyimide substrate was investigated as a function of monolayer thickness. It is found that the resistivity of the multilayer increases with decreasing monolayer thickness from 500 nm to 10 nm. Two significant effects of layer interface scattering and grain boundary scattering were identified to dominate electronic transportation behavior in the Cu/Ta multilayers at different length scales. The electrical resistivity of the multilayer with monolayer thickness ranging from nanometer to submicron scales can be well described by a newly-proposed Fuchs-Sandheimair （F-S） and Mayadas-Shatzkes （M-S） combined model.展开更多
Isothermal flashless die forging process of Ti - alloy structural air - frame part with varying thickness rib has been modelled in this paper.The results of present study show that a upside - down trapezoid rib would...Isothermal flashless die forging process of Ti - alloy structural air - frame part with varying thickness rib has been modelled in this paper.The results of present study show that a upside - down trapezoid rib would be formed and buckling would occure as blank is reduced,if the thickness of billet is maller than or equal to the thickness of rib. During modelling process of structural air frame part with E type cross - section rib, the saddle or lap would be formed finally at the middle of transverse rib between ribs with increase in deformation.If metal is allowed to flow out at confluence of longitudinal and transverse rib, the lop defect would be eliminated,, but a pipe cavity is obvious on corresponding loca- tion of blank. of defect formation depends on distance of metal flow ,friction,temperature homoge- neity of the blank and complexity of the part.展开更多
文摘By electrical resistance tomography (ERT) the cross sectional profiles of gas hold-up in a φ56mm bubble column are obtained with four designs of gas sparger. The effect of sparger geometry on the bubble distribution is re-vealed by applying a sensitivity conjugated gradients reconstruction method (SCG). Experimental results show that over-all hold-up obtained by ERT is generally in good agreement with those measured with the pressure transducer and the ERT system produces informative evidence that the radial profiles of hold-up is very similar to the sparger design in the lower section of bubble column. Meanwhile, the rise velocity of bubble swarm and the Sauter mean bubble size are evaluated using ERT based on dynamic gas disengagement theory. The experimental results are in good agreement with correlations and conventional estimation obtained using pressure transmitter methods.
基金supported by the National Basic Research Program of China(No.2004CB619303)partially by the National Natural Science Foundation of China(No.50571103 and 50971125)(B.Zhang)appreciates the support from the Program for Changjiang Scholars and Innovative Research Team in Northeastern University(IRT0713)
文摘The electrical resistivity of Cu/Ta multilayers deposited by radio-frequency magnetron sputtering on a polyimide substrate was investigated as a function of monolayer thickness. It is found that the resistivity of the multilayer increases with decreasing monolayer thickness from 500 nm to 10 nm. Two significant effects of layer interface scattering and grain boundary scattering were identified to dominate electronic transportation behavior in the Cu/Ta multilayers at different length scales. The electrical resistivity of the multilayer with monolayer thickness ranging from nanometer to submicron scales can be well described by a newly-proposed Fuchs-Sandheimair （F-S） and Mayadas-Shatzkes （M-S） combined model.
文摘Isothermal flashless die forging process of Ti - alloy structural air - frame part with varying thickness rib has been modelled in this paper.The results of present study show that a upside - down trapezoid rib would be formed and buckling would occure as blank is reduced,if the thickness of billet is maller than or equal to the thickness of rib. During modelling process of structural air frame part with E type cross - section rib, the saddle or lap would be formed finally at the middle of transverse rib between ribs with increase in deformation.If metal is allowed to flow out at confluence of longitudinal and transverse rib, the lop defect would be eliminated,, but a pipe cavity is obvious on corresponding loca- tion of blank. of defect formation depends on distance of metal flow ,friction,temperature homoge- neity of the blank and complexity of the part.
