Methane has been demonstrated to be a feasible substrate for electricity generation in microbial fuel cells(MFCs)and denitrifying anaerobic methane oxidation(DAMO).However,these two processes were evaluated separately...Methane has been demonstrated to be a feasible substrate for electricity generation in microbial fuel cells(MFCs)and denitrifying anaerobic methane oxidation(DAMO).However,these two processes were evaluated separately in previous studies and it has remained unknown whether methane is able to simultaneously drive these processes.Here we investigated the co-occurrence and performance of these two processes in the anodic chamber of MFCs.The results showed that methane successfully fueled both electrogenesis and denitrification.Importantly,the maximum nitrate removal rate was significantly enhanced from(1.4±0.8)to(18.4±1.2)mg N/(L·day)by an electrogenic process.In the presence of DAMO,the MFCs achieved a maximum voltage of 610 mV and a maximum power density of 143±12 mW/m^(2).Electrochemical analyses demonstrated that some redox substances(e.g.riboflavin)were likely involved in electrogenesis and also in the denitrification process.High-throughput sequencing indicated that the methanogen Methanobacterium,a close relative of Methanobacterium espanolae,catalyzed methane oxidation and cooperated with both exoelectrogens and denitrifiers(e.g.,Azoarcus).This work provides an effective strategy for improving DAMO in methane-powered MFCs,and suggests that methanogens and denitrifiers may jointly be able to provide an alternative to archaeal DAMO for methane-dependent denitrification.展开更多
The underlying mechanism of the spectral cleaning effect of the cross-polarized wave（XPW） generation process was theoretically investigated. This study shows that the spectral noise of an input spectrum can be remov...The underlying mechanism of the spectral cleaning effect of the cross-polarized wave（XPW） generation process was theoretically investigated. This study shows that the spectral noise of an input spectrum can be removed in the XPW generation process and that the spectral cleaning effect depends on the characteristics of the input pulses, such as the chirp and Fourier-transform-limited duration of the initial pulse, and the modulation amplitude and frequency of the spectral noise. Though these factors codetermine the output spectrum of the XPW generation process, the spectral cleaning effect is mainly affected by the initial pulse chirp. The smoothing of the spectrum in the XPW generation process leads to a significant enhancement of the coherent contrast.展开更多
We report on a mid-infrared fiber laser that uses a single-walled carbon nanotube saturable absorber mirror to realize the mode-locking operation.The laser generates 3.5 μm ultra-short pulses from an erbium-doped flu...We report on a mid-infrared fiber laser that uses a single-walled carbon nanotube saturable absorber mirror to realize the mode-locking operation.The laser generates 3.5 μm ultra-short pulses from an erbium-doped fluoride fiber by utilizing a dual-wavelength pumping scheme.Stable mode-locking is achieved at the 3.5 μm band with a repetition rate of 25.2 MHz.The maximum average power acquired from the laser in the mode-locking regime is 25 mW.The experimental results indicate that the carbon nanotube is an effective saturable absorber for mode-locking in the mid-infrared spectral region.展开更多
High-power tunable femtosecond mid-infrared(MIR)pulses are of great interest for many scientific and industrial applications.Here we demonstrate a compact fluoride-fiber-based system that generates single solitons tun...High-power tunable femtosecond mid-infrared(MIR)pulses are of great interest for many scientific and industrial applications.Here we demonstrate a compact fluoride-fiber-based system that generates single solitons tunable from 3 to 3.8μm.The system is composed of an Er:ZBLAN fiber oscillator and amplifier followed by a fusion-spliced Dy:ZBLAN fiber amplifier.The Er:ZBLAN fiber amplifier acts as a power booster as well as a frequency shifter to generate Raman solitons up to 3μm.The Dy:ZBLAN fiber amplifier transfers the energy from the residual 2.8μm radiation into the Raman solitons using an in-band pumping scheme,and further extends the wavelength up to 3.8μm.Common residual pump radiation and secondary solitons accompanying the soliton self-frequency shift(SSFS)are recycled to amplify Raman solitons,consequently displaying a higher output power and pulse energy,a wider shifting range,and an excellent spectral purity.Stable 252 fs pulses at3.8μm with a record average power of 1.6 W and a pulse energy of 23 n J are generated.This work provides an effective way to develop high-power widely tunable ultrafast single-soliton MIR laser sources,and this method can facilitate the design of other SSFS-based laser systems for single-soliton generation.展开更多
High-power femtosecond mid-infrared(MIR)lasers are of vast importance to both fundamental research and applications.We report a high-power femtosecond master oscillator power amplifier laser system consisting of a sin...High-power femtosecond mid-infrared(MIR)lasers are of vast importance to both fundamental research and applications.We report a high-power femtosecond master oscillator power amplifier laser system consisting of a singlemode Er:ZBLAN fiber mode-locked oscillator and pre-amplifier followed by a large-mode-area Er:ZBLAN fiber main amplifier.The main amplifier is actively cooled and bidirectionally pumped at 976 nm,generating a slope efficiency of 26.9%.Pulses of 8.12 W,148 fs at 2.8μm with a repetition rate of 69.65 MHz are achieved.To the best of our knowledge,this is the highest average power ever achieved from a femtosecond MIR laser source.Such a compact ultrafast laser system is promising for a wide range of applications,such as medical surgery and material processing.展开更多
基金supported by the National Natural Science Foundation of China(No.42077284)the Natural Science Foundation of Fujian Province,China(No.2020J02015)the Fund for Outstanding Young Scientific Talent Cultivation Program of Fujian Agriculture and Forestry University of China(No.XJQ201906).
文摘Methane has been demonstrated to be a feasible substrate for electricity generation in microbial fuel cells(MFCs)and denitrifying anaerobic methane oxidation(DAMO).However,these two processes were evaluated separately in previous studies and it has remained unknown whether methane is able to simultaneously drive these processes.Here we investigated the co-occurrence and performance of these two processes in the anodic chamber of MFCs.The results showed that methane successfully fueled both electrogenesis and denitrification.Importantly,the maximum nitrate removal rate was significantly enhanced from(1.4±0.8)to(18.4±1.2)mg N/(L·day)by an electrogenic process.In the presence of DAMO,the MFCs achieved a maximum voltage of 610 mV and a maximum power density of 143±12 mW/m^(2).Electrochemical analyses demonstrated that some redox substances(e.g.riboflavin)were likely involved in electrogenesis and also in the denitrification process.High-throughput sequencing indicated that the methanogen Methanobacterium,a close relative of Methanobacterium espanolae,catalyzed methane oxidation and cooperated with both exoelectrogens and denitrifiers(e.g.,Azoarcus).This work provides an effective strategy for improving DAMO in methane-powered MFCs,and suggests that methanogens and denitrifiers may jointly be able to provide an alternative to archaeal DAMO for methane-dependent denitrification.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11127901,61521093,and 61505234)the International S&T Cooperation of Program of China(Grant No.2016YFE0119300)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB160301)the Youth Innovation Promotion Association,Chinese Academy of Sciences
文摘The underlying mechanism of the spectral cleaning effect of the cross-polarized wave（XPW） generation process was theoretically investigated. This study shows that the spectral noise of an input spectrum can be removed in the XPW generation process and that the spectral cleaning effect depends on the characteristics of the input pulses, such as the chirp and Fourier-transform-limited duration of the initial pulse, and the modulation amplitude and frequency of the spectral noise. Though these factors codetermine the output spectrum of the XPW generation process, the spectral cleaning effect is mainly affected by the initial pulse chirp. The smoothing of the spectrum in the XPW generation process leads to a significant enhancement of the coherent contrast.
基金supported by the National Natural Science Foundation of China (NSFC) (Nos. 61975136, 61935014, 61775146, and 61905151)Guangdong Basic and Applied Basic Research Foundation (No. 2019A1515010699)+2 种基金Shenzhen Science and Technology Project (Nos. JCYJ20160520161351540, JCYJ20170817100639177,JCYJ20170302151146995, JCYJ20180305125352956,JCYJ20160328144942069,and JCYJ20190808141011530)State Key Laboratory of Information Photonics and Optical Communications (No. IPOC2019ZZ01)State Key Laboratory of Pulsed Power Laser Technology (No. SKL2018KF04)
文摘We report on a mid-infrared fiber laser that uses a single-walled carbon nanotube saturable absorber mirror to realize the mode-locking operation.The laser generates 3.5 μm ultra-short pulses from an erbium-doped fluoride fiber by utilizing a dual-wavelength pumping scheme.Stable mode-locking is achieved at the 3.5 μm band with a repetition rate of 25.2 MHz.The maximum average power acquired from the laser in the mode-locking regime is 25 mW.The experimental results indicate that the carbon nanotube is an effective saturable absorber for mode-locking in the mid-infrared spectral region.
基金National Natural Science Foundation of China(61775146,61905151,61935014,61975136,62105222)Basic and Applied Basic Research Foundation of Guangdong Province(2019A1515010699)+1 种基金Natural Science Basic Research Program of Shaanxi(2020JQ-204)Shenzhen Science and Technology Program(CJGJZD20200617103003009,JCYJ20210324094400001)。
文摘High-power tunable femtosecond mid-infrared(MIR)pulses are of great interest for many scientific and industrial applications.Here we demonstrate a compact fluoride-fiber-based system that generates single solitons tunable from 3 to 3.8μm.The system is composed of an Er:ZBLAN fiber oscillator and amplifier followed by a fusion-spliced Dy:ZBLAN fiber amplifier.The Er:ZBLAN fiber amplifier acts as a power booster as well as a frequency shifter to generate Raman solitons up to 3μm.The Dy:ZBLAN fiber amplifier transfers the energy from the residual 2.8μm radiation into the Raman solitons using an in-band pumping scheme,and further extends the wavelength up to 3.8μm.Common residual pump radiation and secondary solitons accompanying the soliton self-frequency shift(SSFS)are recycled to amplify Raman solitons,consequently displaying a higher output power and pulse energy,a wider shifting range,and an excellent spectral purity.Stable 252 fs pulses at3.8μm with a record average power of 1.6 W and a pulse energy of 23 n J are generated.This work provides an effective way to develop high-power widely tunable ultrafast single-soliton MIR laser sources,and this method can facilitate the design of other SSFS-based laser systems for single-soliton generation.
基金the National Natural Science Foundation of China(61975136,61935014,62105222,61775146,61905151)the Basic and Applied Basic Research Foundation of Guangdong Province(2019A1515010699)+1 种基金the Shenzhen Science and Technology Innovation Program(CJGJZD20200617103003009,JCYJ20210324094400001,GJHZ20210705141801006)the Beijing Natural Science Foundation(JQ21019).
文摘High-power femtosecond mid-infrared(MIR)lasers are of vast importance to both fundamental research and applications.We report a high-power femtosecond master oscillator power amplifier laser system consisting of a singlemode Er:ZBLAN fiber mode-locked oscillator and pre-amplifier followed by a large-mode-area Er:ZBLAN fiber main amplifier.The main amplifier is actively cooled and bidirectionally pumped at 976 nm,generating a slope efficiency of 26.9%.Pulses of 8.12 W,148 fs at 2.8μm with a repetition rate of 69.65 MHz are achieved.To the best of our knowledge,this is the highest average power ever achieved from a femtosecond MIR laser source.Such a compact ultrafast laser system is promising for a wide range of applications,such as medical surgery and material processing.
