Computer modeling of semi-solid structure formation is of significance in both understanding the mechanisms of globular structure formation and determining the effect of solidification conditions on final microstructu...Computer modeling of semi-solid structure formation is of significance in both understanding the mechanisms of globular structure formation and determining the effect of solidification conditions on final microstructure.A modified cellular automaton(mCA) model has been developed,which is coupled with macroscopic models for heat transfer calculation and microscopic models for nucleation and grain growth.The mCA model is applied to A356 Al alloy-one of the most widely used semi-solid alloys,to predict grain morphology and grain size during semi-solid solidification,and determines the effects of pouring temperature on the final microstructure.The modeling results show that the lower the initial temperature,the finer grain size will be obtained.In addition,the model can be used to predict the solutal micro-segregation.展开更多
The effects of trace elements Cd and Sn on precipitation process of Al-Si-Cu-Mg cast alloys were investigated in the present research.It is shown that the addition of Cd and Sn not only increases remarkably the aging ...The effects of trace elements Cd and Sn on precipitation process of Al-Si-Cu-Mg cast alloys were investigated in the present research.It is shown that the addition of Cd and Sn not only increases remarkably the aging peak hardness and reduces the time to reach aging peak,but also eliminates the double-aging-peak phenomenon which appears in Al-Si-Cu-Mg alloys.In Al-Si-Cu-Mg alloys the first aging peak corresponds to GP zones(especially GPⅡ) ,and the second one is caused by metastable phases.The obvious time interval of transition from GPⅡ to metastable phases associates with the double-aging-peak phenomenon.The results of DSC and TEM show that Cd/Sn elements suppress the formation of GPⅠzone,stimulate the formation of θ",θ' and θ phases,and then shorten remarkably the temperature intervals of each exothermic peak.Because the transition interval between GPⅡzone and metastable phases is shortened by Cd/Sn in Al-Si-Cu-Mg cast alloys,θ' phase coexists with θ" phase in matrix of ageing peak condition,which causes effective hardening on the alloys,and at the same time,eliminates the double-aging-peak phenomenon.展开更多
The hypereutectic Al-Si alloy was fabricated by hot extrusion process after solidified under electromagnetic stirring,and the microstructure and mechanical properties of the alloy were studied.The results show that th...The hypereutectic Al-Si alloy was fabricated by hot extrusion process after solidified under electromagnetic stirring,and the microstructure and mechanical properties of the alloy were studied.The results show that the ultimate tensile strength and elongation of the alloy reached 229.5 MPa and 4.6%,respectively with the extrusion ratio of 10,and 263.2 MPa and 5.4%,respectively with extrusion ratio of 20.This indicates that the mechanical properties of the alloy are obviously improved with the increase of extrusion ratio.After hot extruded,the primary Si,eutectic Si,Mg2Si,AlNi,Al7Cu4Ni and Al-Si-Mn-Fe-Cr-Mo phases are refined to different extent,and the efficiency of refinement is obvious more and more with the increase of extrusion ratio.After T6 heat treatment,the sharp corners of these phases become passivated and roundish,and the mechanical properties are improved.The ultimate tensile strength of the extruded alloy after T6 heat treatment reaches 335.3 MPa with extrusion ratio of 10 and 353.6 MPa with extrusion ratio of 20.展开更多
文摘Computer modeling of semi-solid structure formation is of significance in both understanding the mechanisms of globular structure formation and determining the effect of solidification conditions on final microstructure.A modified cellular automaton(mCA) model has been developed,which is coupled with macroscopic models for heat transfer calculation and microscopic models for nucleation and grain growth.The mCA model is applied to A356 Al alloy-one of the most widely used semi-solid alloys,to predict grain morphology and grain size during semi-solid solidification,and determines the effects of pouring temperature on the final microstructure.The modeling results show that the lower the initial temperature,the finer grain size will be obtained.In addition,the model can be used to predict the solutal micro-segregation.
文摘The effects of trace elements Cd and Sn on precipitation process of Al-Si-Cu-Mg cast alloys were investigated in the present research.It is shown that the addition of Cd and Sn not only increases remarkably the aging peak hardness and reduces the time to reach aging peak,but also eliminates the double-aging-peak phenomenon which appears in Al-Si-Cu-Mg alloys.In Al-Si-Cu-Mg alloys the first aging peak corresponds to GP zones(especially GPⅡ) ,and the second one is caused by metastable phases.The obvious time interval of transition from GPⅡ to metastable phases associates with the double-aging-peak phenomenon.The results of DSC and TEM show that Cd/Sn elements suppress the formation of GPⅠzone,stimulate the formation of θ",θ' and θ phases,and then shorten remarkably the temperature intervals of each exothermic peak.Because the transition interval between GPⅡzone and metastable phases is shortened by Cd/Sn in Al-Si-Cu-Mg cast alloys,θ' phase coexists with θ" phase in matrix of ageing peak condition,which causes effective hardening on the alloys,and at the same time,eliminates the double-aging-peak phenomenon.
基金supported by National Natural Science Foundation of China (Grant No. 50971092)Innovation Team Plan pf Liaoning Provincical Education Department (Grant no. 2007T132)
文摘The hypereutectic Al-Si alloy was fabricated by hot extrusion process after solidified under electromagnetic stirring,and the microstructure and mechanical properties of the alloy were studied.The results show that the ultimate tensile strength and elongation of the alloy reached 229.5 MPa and 4.6%,respectively with the extrusion ratio of 10,and 263.2 MPa and 5.4%,respectively with extrusion ratio of 20.This indicates that the mechanical properties of the alloy are obviously improved with the increase of extrusion ratio.After hot extruded,the primary Si,eutectic Si,Mg2Si,AlNi,Al7Cu4Ni and Al-Si-Mn-Fe-Cr-Mo phases are refined to different extent,and the efficiency of refinement is obvious more and more with the increase of extrusion ratio.After T6 heat treatment,the sharp corners of these phases become passivated and roundish,and the mechanical properties are improved.The ultimate tensile strength of the extruded alloy after T6 heat treatment reaches 335.3 MPa with extrusion ratio of 10 and 353.6 MPa with extrusion ratio of 20.
