The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we e...The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we examined the simultaneous enhancement of mechanical and shape memory properties using heat-treatment homogenization of Ti_(2)Ni precipitates in a Ti_(50.6)Ni_(49.4)SMA fabricated using SLM. Specifically, because of the complete solution treatment, nanoscale spherical Ti_(2)Ni precipitates were homogeneously dispersed throughout the grain interior. Interestingly, the resultant SMA exhibited an ultrahigh tensile strength of 880 ± 13 MPa, a large elongation of 22.4 ± 0.4%, and an excellent shape memory effect, with a recovery rate of > 98% and ultrahigh recoverable strain of 5.32% after ten loading–unloading cycles. These simultaneously enhanced properties are considerably superior than those of most previously reported Ti Ni SMAs fabricated using additive manufacturing. Fundamentally, the enhancement in tensile strength is ascribed to precipitation strengthening and work hardening, and the large plasticity is mainly attributed to the homogeneous nanoscale globular Ti_(2)Ni precipitates, which effectively impeded the rapid propagation of microcracks. Furthermore, the enhanced shape memory properties are derived from the suppression of dislocation movement and formation of retained stabilized martensite by the presence of high-density dislocations, nanoscale Ti_(2)Ni precipitates, and abundant interfaces. The obtained results provide insight into the enhancement of the two types of properties in Ti Ni SMAs and will accelerate the wider application of SMAs.展开更多
Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of componen...Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of components manufactured from those powder feedstock.This work investigated the microstructure,phase composition,melt pool morphology,and mechanical properties of a prealloyed Ti-35Nb alloy manufactured using L-PBF and compared these to their counterparts produced from elemental powder mixture.The samples manufactured from the powder mixture are composed of randomly distributed undissolved Nb in theα/βmatrix,resulting from the unstable melt pool during the melting of the powder mixture.By contrast,parts produced from prealloyed powder display a homogeneous microstructure withβandαphases,owing to the full melting of prealloyed powder,therefore,a more stable melt pool to achieve a homogeneous microstructure.The Ti-35Nb manufactured from prealloyed powder exhibits large tensile ductility(about 10 times that of the counterparts using mixed powder),attributed to the high homogeneity in microstructure and chemical composition,strong interface bonding,relatively low oxygen content,and the existence of a large amount ofβphase.This work sheds insights into understanding the effect of powder feedstock on the melt pool stability therefore the microstructure and mechanical behavior of the resultant parts.展开更多
Ti and its alloys have been broadly adopted across various industries owing to their outstanding proper-ties,such as high strength-to-weight ratio,excellent fatigue performance,exceptional corrosion resistance and so ...Ti and its alloys have been broadly adopted across various industries owing to their outstanding proper-ties,such as high strength-to-weight ratio,excellent fatigue performance,exceptional corrosion resistance and so on.Additive manufacturing(AM)is a complement to,rather than a replacement for,traditional manufacturing processes.It enhances flexibility in fabricating complex components and resolves machin-ing challenges,resulting in reduced lead times for custom designs.However,owing to distinctions among various AM technologies,Ti alloys fabricated by different AM methods usually present differences in mi-crostructure and defects,which can significantly influence the mechanical performance of built parts.Therefore,having an in-depth knowledge of the scientific aspects of fabrication and material properties is crucial to achieving high-performance Ti alloys through different AM methods.This article reviews the mechanical properties of Ti alloys fabricated by two mainstream powder-type AM techniques:powder bed fusion(PBF)and directed energy deposition(DED).The review examines several key aspects,en-compassing phase formation,grain size and morphology,and defects,and provides an in-depth analysis of their influence on the mechanical behaviors of Ti alloys.This review can aid researchers and engi-neers in selecting appropriate PBF or DED methods and optimizing their process parameters to fabricate high-performance Ti alloys for a wide range of industrial applications.展开更多
It is well accepted that grain-boundary phases in metallic alloys greatly deteriorate the mechanical properties.In our work,we report on a novel strategy to prepare high strength-ductility β-type(Ti69.71 Nb23.72Zr4.8...It is well accepted that grain-boundary phases in metallic alloys greatly deteriorate the mechanical properties.In our work,we report on a novel strategy to prepare high strength-ductility β-type(Ti69.71 Nb23.72Zr4.83Ta1.74)97Si3(at.%)(TNZTS) alloys by tailoring grain-boundary metastable Si-containing phase.Specifically,the thin shell-shaped metastable S1 phase surrounding the columnar β-Ti grain was intercepted successfully via nonequilibrium rapid solidification achieved by selective laser melting(SLM).Subsequently,the thin shell-shaped metastable(Ti,Nb,Zr)5 Si3(called S1) phase was transformed into globular(Ti,Nb,Zr)2 Si(called S2) phase by the solution heat treatment.Interestingly,the globular S2 phases reinforced TNZTS alloy exhibits ultrahigh yield strength of 978 MPa,ultimate strength of 1010 MPa and large elongation of 10.4 %,overcoming the strength-ductility trade-off of TNZTS alloys by various methods.Especially,the reported yield strength herein is 55 % higher than that of conventionally forged TNZT alloys.Dynamic analysis indicates the globularization process of the metastable S1 phase is controlled by the model of termination migration.The quantitative analysis on strengthening mechanism demonstrates that the increase in yield strength of the heat-treated alloys is mainly ascribed to the strengthening of the precipitated silicide and the dislocations induced by high cooling rate.The obtained results provide some basis guidelines for designing and fabricating β-titanium alloys with excellent mechanical properties,and pave the way for biomedical application of TNZTS alloy by SLM.展开更多
TiO2 particles with desirable properties were produced by undergoing specific durations of ball milling.Characterizations of the TiO2 particles before and after ball milling were investigated via X-ray diffraction（XR...TiO2 particles with desirable properties were produced by undergoing specific durations of ball milling.Characterizations of the TiO2 particles before and after ball milling were investigated via X-ray diffraction（XRD）, Brunauer-Emmett-Teller（BET）, particle size analysis, zeta potential, and scanning electron microscope（SEM）. The equilibrium adsorption data were well fitted to Langmuir, Freundlich, and Dubinin-Radushkevich（D-R） isotherms. Compared to the as-received TiO2（mean particle size d150= 0.78μm, specific surface area = 88.17 m^2g-1, pore volume = 0.41 cm^3g-1）, the 60 min ballmilled TiO2（d50= 0.55 μm, specific surface area = 99.48 m2g-1, pore volume = 0.48 cm3g-1） enhanced the adsorption quantity of congo red and methylene blue from 10.4 mg g-1to 13.6 mg g-1, and from17.0 mg g-1to 22.2 mg g-1, respectively; and also improved the kinetic rates from k = 0.1325 to 0.2193, and k = 0.0944 to 0.1553, respectively. Dye adsorption and degradation efficiency of congo red was enhanced in acidic p H range（2–5.14）, and methylene blue was enhanced in alkaline p H range（7.58–12）.展开更多
The microstructural stability of lamellar TiAl base alloys at high temperatures was studied by conventional and high resolution transmission electron microscopy. The influence of substructures on the thermal stability...The microstructural stability of lamellar TiAl base alloys at high temperatures was studied by conventional and high resolution transmission electron microscopy. The influence of substructures on the thermal stability of lamellar structure was emphasized. These substructures produced by thermal mechanical treatments include the interfacial dislocations and ledges, the subgrain boundaries, the impinged T(Q) twins and misorientated lamellar interfaces. The microstructural change of three kinds of lamellar TiAl base alloys containing differents type and densities of substructures were compared during exposure at 800~1 000 ℃. It was found that the existence of such substructures could accelerate the degeneration of lamellar structure, leading to the rapid necking and break up of α 2 plates, the coarsening of γ plates, and the formation of new γ grains. As a result, the lamellar structure with substructures started to degenerate after thermal exposure at 800℃ for 4.5 h. While only slight coarsening was observed at the colony boundaries in the lamellar structure without substructures even after exposure at 900 ℃ for 7 d.展开更多
基金supported financially by the Key-Area Research and Development Program of Guangdong Province (No. 2020B090923001)the National Natural Science Foundation of China (No. U19A2085)+3 种基金the Key Basic and Applied Research Program of Guangdong Province (No. 2019B030302010)the financial support from the China Postdoctoral Science Foundation (No. 2019M662908)Guangdong Basic and Applied Basic Research Foundation (No.2019A1515110215)the Fundamental Research Funds for the Central Universities (No.2020ZYGXZR030)。
文摘The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we examined the simultaneous enhancement of mechanical and shape memory properties using heat-treatment homogenization of Ti_(2)Ni precipitates in a Ti_(50.6)Ni_(49.4)SMA fabricated using SLM. Specifically, because of the complete solution treatment, nanoscale spherical Ti_(2)Ni precipitates were homogeneously dispersed throughout the grain interior. Interestingly, the resultant SMA exhibited an ultrahigh tensile strength of 880 ± 13 MPa, a large elongation of 22.4 ± 0.4%, and an excellent shape memory effect, with a recovery rate of > 98% and ultrahigh recoverable strain of 5.32% after ten loading–unloading cycles. These simultaneously enhanced properties are considerably superior than those of most previously reported Ti Ni SMAs fabricated using additive manufacturing. Fundamentally, the enhancement in tensile strength is ascribed to precipitation strengthening and work hardening, and the large plasticity is mainly attributed to the homogeneous nanoscale globular Ti_(2)Ni precipitates, which effectively impeded the rapid propagation of microcracks. Furthermore, the enhanced shape memory properties are derived from the suppression of dislocation movement and formation of retained stabilized martensite by the presence of high-density dislocations, nanoscale Ti_(2)Ni precipitates, and abundant interfaces. The obtained results provide insight into the enhancement of the two types of properties in Ti Ni SMAs and will accelerate the wider application of SMAs.
基金the support of the Australian Government Research Training Program Scholarship and Forrest Research Foundation Ph D scholarshipthe fnancial support provided by the Open Foundation of Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials(No.2021GXYSOF03)and the facilitiesthe scientifc and technical assistance of the Australian Microscopy&Microanalysis Research Facility at the Centre for Microscopy,Characterisation&Analysis,The University of Western Australia,a facility funded by the University,State and Commonwealth Governments。
文摘Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(L-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of components manufactured from those powder feedstock.This work investigated the microstructure,phase composition,melt pool morphology,and mechanical properties of a prealloyed Ti-35Nb alloy manufactured using L-PBF and compared these to their counterparts produced from elemental powder mixture.The samples manufactured from the powder mixture are composed of randomly distributed undissolved Nb in theα/βmatrix,resulting from the unstable melt pool during the melting of the powder mixture.By contrast,parts produced from prealloyed powder display a homogeneous microstructure withβandαphases,owing to the full melting of prealloyed powder,therefore,a more stable melt pool to achieve a homogeneous microstructure.The Ti-35Nb manufactured from prealloyed powder exhibits large tensile ductility(about 10 times that of the counterparts using mixed powder),attributed to the high homogeneity in microstructure and chemical composition,strong interface bonding,relatively low oxygen content,and the existence of a large amount ofβphase.This work sheds insights into understanding the effect of powder feedstock on the melt pool stability therefore the microstructure and mechanical behavior of the resultant parts.
基金the financial support provided by the industrial grant(No.G1006320).
文摘Ti and its alloys have been broadly adopted across various industries owing to their outstanding proper-ties,such as high strength-to-weight ratio,excellent fatigue performance,exceptional corrosion resistance and so on.Additive manufacturing(AM)is a complement to,rather than a replacement for,traditional manufacturing processes.It enhances flexibility in fabricating complex components and resolves machin-ing challenges,resulting in reduced lead times for custom designs.However,owing to distinctions among various AM technologies,Ti alloys fabricated by different AM methods usually present differences in mi-crostructure and defects,which can significantly influence the mechanical performance of built parts.Therefore,having an in-depth knowledge of the scientific aspects of fabrication and material properties is crucial to achieving high-performance Ti alloys through different AM methods.This article reviews the mechanical properties of Ti alloys fabricated by two mainstream powder-type AM techniques:powder bed fusion(PBF)and directed energy deposition(DED).The review examines several key aspects,en-compassing phase formation,grain size and morphology,and defects,and provides an in-depth analysis of their influence on the mechanical behaviors of Ti alloys.This review can aid researchers and engi-neers in selecting appropriate PBF or DED methods and optimizing their process parameters to fabricate high-performance Ti alloys for a wide range of industrial applications.
基金supported financially by the National Natural Science Foundation of China (Nos.U19A2085 and 51627805)the Key-Area Research and Development Program of Guangdong Province (No.2020B090923001)+2 种基金the Key Basic and Applied Research Program of Guangdong Province (No.2019B030302010)the Optical Valley Science Research Project,WEHDZ (No.2019001)financial support from the China Postdoctoral Science Foundation (Nos.2019TQ0099 and 2019M662908)。
文摘It is well accepted that grain-boundary phases in metallic alloys greatly deteriorate the mechanical properties.In our work,we report on a novel strategy to prepare high strength-ductility β-type(Ti69.71 Nb23.72Zr4.83Ta1.74)97Si3(at.%)(TNZTS) alloys by tailoring grain-boundary metastable Si-containing phase.Specifically,the thin shell-shaped metastable S1 phase surrounding the columnar β-Ti grain was intercepted successfully via nonequilibrium rapid solidification achieved by selective laser melting(SLM).Subsequently,the thin shell-shaped metastable(Ti,Nb,Zr)5 Si3(called S1) phase was transformed into globular(Ti,Nb,Zr)2 Si(called S2) phase by the solution heat treatment.Interestingly,the globular S2 phases reinforced TNZTS alloy exhibits ultrahigh yield strength of 978 MPa,ultimate strength of 1010 MPa and large elongation of 10.4 %,overcoming the strength-ductility trade-off of TNZTS alloys by various methods.Especially,the reported yield strength herein is 55 % higher than that of conventionally forged TNZT alloys.Dynamic analysis indicates the globularization process of the metastable S1 phase is controlled by the model of termination migration.The quantitative analysis on strengthening mechanism demonstrates that the increase in yield strength of the heat-treated alloys is mainly ascribed to the strengthening of the precipitated silicide and the dislocations induced by high cooling rate.The obtained results provide some basis guidelines for designing and fabricating β-titanium alloys with excellent mechanical properties,and pave the way for biomedical application of TNZTS alloy by SLM.
文摘TiO2 particles with desirable properties were produced by undergoing specific durations of ball milling.Characterizations of the TiO2 particles before and after ball milling were investigated via X-ray diffraction（XRD）, Brunauer-Emmett-Teller（BET）, particle size analysis, zeta potential, and scanning electron microscope（SEM）. The equilibrium adsorption data were well fitted to Langmuir, Freundlich, and Dubinin-Radushkevich（D-R） isotherms. Compared to the as-received TiO2（mean particle size d150= 0.78μm, specific surface area = 88.17 m^2g-1, pore volume = 0.41 cm^3g-1）, the 60 min ballmilled TiO2（d50= 0.55 μm, specific surface area = 99.48 m2g-1, pore volume = 0.48 cm3g-1） enhanced the adsorption quantity of congo red and methylene blue from 10.4 mg g-1to 13.6 mg g-1, and from17.0 mg g-1to 22.2 mg g-1, respectively; and also improved the kinetic rates from k = 0.1325 to 0.2193, and k = 0.0944 to 0.1553, respectively. Dye adsorption and degradation efficiency of congo red was enhanced in acidic p H range（2–5.14）, and methylene blue was enhanced in alkaline p H range（7.58–12）.
文摘The microstructural stability of lamellar TiAl base alloys at high temperatures was studied by conventional and high resolution transmission electron microscopy. The influence of substructures on the thermal stability of lamellar structure was emphasized. These substructures produced by thermal mechanical treatments include the interfacial dislocations and ledges, the subgrain boundaries, the impinged T(Q) twins and misorientated lamellar interfaces. The microstructural change of three kinds of lamellar TiAl base alloys containing differents type and densities of substructures were compared during exposure at 800~1 000 ℃. It was found that the existence of such substructures could accelerate the degeneration of lamellar structure, leading to the rapid necking and break up of α 2 plates, the coarsening of γ plates, and the formation of new γ grains. As a result, the lamellar structure with substructures started to degenerate after thermal exposure at 800℃ for 4.5 h. While only slight coarsening was observed at the colony boundaries in the lamellar structure without substructures even after exposure at 900 ℃ for 7 d.
