We report a method using in situ etching to decouple the axial from the radial nanowire growth pathway,independent of other growth parameters.Thereby a wide range of growth parameters can be explored to improve the na...We report a method using in situ etching to decouple the axial from the radial nanowire growth pathway,independent of other growth parameters.Thereby a wide range of growth parameters can be explored to improve the nanowire properties without concern of tapering or excess structural defects formed during radial growth.We demonstrate the method using etching by HCl during InP nanowire growth.The improved crystal quality of etched nanowires is indicated by strongly enhanced photoluminescence as compared to reference nanowires obtained without etching.展开更多
The development of methods to produce nanoparticles with unique properties via the aerosol route is progressing rapidly. Typical characterization techniques extract particles from the synthesis process for subsequent ...The development of methods to produce nanoparticles with unique properties via the aerosol route is progressing rapidly. Typical characterization techniques extract particles from the synthesis process for subsequent offiine analysis, which may alter the particle characteristics. In this work, we use laser-vaporization aerosol mass spectrometry （LV-AMS） with 70-eV electron ionization for real-time, in-situ nanoparticle characterization. The particle characteristics are examined for various aerosol synthesis methods, degrees of sintering, and for controlled condensation of organic material to simulate surface coating/functionalization. The LV-AMS is used to characterize several types of metal nanoparticles （Ag, Au, Pd, PdAg, Fe, Ni, and Cu）. The degree of oxidation of the Fe and Ni nanoparticles is found to increase with increased sintering temperature, while the surface organic-impurity content of the metal particles decreases with increased sintering temperature. For aggregate metal particles, the organic-impurity content is found to be similar to that of a monolayer. By comparing different equivalent-diameter measurements, we demonstrate that the LV-AMS can be used in tandem with a differential mobility analyzer to determine the compactness of synthesized metal particles, both during sintering and during material addition for surface functionalization. Further, materials supplied to the particle production line downstream of the particle generators are found to reach the generators as contaminants. The capacity for such in-situ observations is important, as it facilitates rapid response to undesired behavior within the particle production process. This study demonstrates the utility of real-time, in-situ aerosol mass spectrometric measurements to characterize metal nanoparticles obtained directly from the synthesis process line, including their chemical composition, shape, and contamination, providing the potential for effective optimization of process operating parameters.展开更多
Live observations of growing nanowires using in situ transmission electron microscopy （TEM） is becoming an increasingly important tool for understanding the dynamic processes occurring during nanowire growth. Here w...Live observations of growing nanowires using in situ transmission electron microscopy （TEM） is becoming an increasingly important tool for understanding the dynamic processes occurring during nanowire growth. Here we present observations of growing InAs nanowires, which constitute the first reported in situ growth of a In-V compound in a transmission electron microscope. Real time observations of events taking place over longer growth lengths were possible due to the high growth rates of up to I nm/s that were achieved. Straight growth （mainly in 〈111〉B directions） was observed at uniform temperature and partial pressure while intentional fluctuations in these conditions caused the nanowires to form kinks and change growth direction. The mechanisms behind the kinking are discussed in detail. In situ observations of nanowire kinking has previously only been reported for nonpolar diamond structure type materials （such as Si）, but here we present results for a polar zinc blende structure （InAs）. In this study a closed cell with electron and X-ray transparent a-SiN windows was used in a conventional high resolution transmission electron microscope, enabling high resolution imaging and compositional analysis in between the growth periods.展开更多
Aerosol technology provides efficient methods for producing nanoparticles with well-controlled composition and size distribution. This review provides an overview of methods and results obtained by using aerosol techn...Aerosol technology provides efficient methods for producing nanoparticles with well-controlled composition and size distribution. This review provides an overview of methods and results obtained by using aerosol technology for producing nanostruetures for a variety of applications in semiconductor physics and device technology. Examples are given from： production of metal and metal alloy particles： semiconductor nanoparticles; semiconductor nanowires, grown both in the aerosol phase and on substrates; physics studies based on individual aerosol-generated devices; and large area deviees based on aerosol particles.展开更多
Highly controlled particle-assisted growth of semiconductor nanowires has been performed for many years,and a number of novel nanowire-based devices have been demonstrated.Full control of the epitaxial growth is requi...Highly controlled particle-assisted growth of semiconductor nanowires has been performed for many years,and a number of novel nanowire-based devices have been demonstrated.Full control of the epitaxial growth is required to optimize the performance of devices,and gold seed particles are known to provide the most controlled growth.Successful nanowire growth from gold particles generated and deposited by various different methods has been reported,but no investigation has yet been performed to compare the effects of gold particle generation and deposition methods on nanowire growth.In this article we present a direct comparative study of the effect of the gold particle creation and deposition methods on nanowire growth characteristics and nanowire crystal structure,and investigate the limitations of the different generation and deposition methods used.展开更多
In-air epitaxy of nanostructures(Aerotaxy)has recently emerged as a viable route for fast,large-scale production.In this study,we use small-a ngle X-ray scatteri ng to perform direct in-flight characterizati ons of th...In-air epitaxy of nanostructures(Aerotaxy)has recently emerged as a viable route for fast,large-scale production.In this study,we use small-a ngle X-ray scatteri ng to perform direct in-flight characterizati ons of the first step of this process,i.e.,the en gineered formatio n of Au and Pt aerosol nan oparticles by spark gen erati on in a flow of N2 gas.This represe nts a particular challe nge for characterizati on because the particle density can be extremely low in con trolled production.The particles produced are exami ned duri ng producti on at operatio nal pressures close to atmospheric conditions and exhibit a log no rmal size distributi on ranging from 5-100nm.The Au and Pt particle productio n and detection are compared.We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding domi nant physical properties,in cludi ng the average particle diameter and sphericity,as in flue need by particle sintering and the prese nee of aggregates.We observe highly sorted and sin tered spherical Au nano particles at ultra-dilute concen tratio ns(<5×10^5 particles/cm^3)corresponding to a volume fraction below 3×10^-10,which is orders of magnitude below that of previously measured aerosols.We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis.Our study indicates that with high-intensity synchrotron beams and careful con sideratio n of backgro und removal,size and shape info rmati on can be obtai ned for extremely low particle concentrations with industrially relevant narrow size distributions.展开更多
基金This work was performed within the Nanometer Structure Consortium at Lund University and supported by the Swedish Energy Agency,the Swedish Research Council,the Swedish Foundation for Strategic Research,and by the EU programs AMON-RA(No.214814)and NODE(No.015783)This report is based on a project which was funded by E.ON AG as part of the E.ON International Research Initiative.Responsibility for the content of this publication lies with the authors.
文摘We report a method using in situ etching to decouple the axial from the radial nanowire growth pathway,independent of other growth parameters.Thereby a wide range of growth parameters can be explored to improve the nanowire properties without concern of tapering or excess structural defects formed during radial growth.We demonstrate the method using etching by HCl during InP nanowire growth.The improved crystal quality of etched nanowires is indicated by strongly enhanced photoluminescence as compared to reference nanowires obtained without etching.
文摘The development of methods to produce nanoparticles with unique properties via the aerosol route is progressing rapidly. Typical characterization techniques extract particles from the synthesis process for subsequent offiine analysis, which may alter the particle characteristics. In this work, we use laser-vaporization aerosol mass spectrometry （LV-AMS） with 70-eV electron ionization for real-time, in-situ nanoparticle characterization. The particle characteristics are examined for various aerosol synthesis methods, degrees of sintering, and for controlled condensation of organic material to simulate surface coating/functionalization. The LV-AMS is used to characterize several types of metal nanoparticles （Ag, Au, Pd, PdAg, Fe, Ni, and Cu）. The degree of oxidation of the Fe and Ni nanoparticles is found to increase with increased sintering temperature, while the surface organic-impurity content of the metal particles decreases with increased sintering temperature. For aggregate metal particles, the organic-impurity content is found to be similar to that of a monolayer. By comparing different equivalent-diameter measurements, we demonstrate that the LV-AMS can be used in tandem with a differential mobility analyzer to determine the compactness of synthesized metal particles, both during sintering and during material addition for surface functionalization. Further, materials supplied to the particle production line downstream of the particle generators are found to reach the generators as contaminants. The capacity for such in-situ observations is important, as it facilitates rapid response to undesired behavior within the particle production process. This study demonstrates the utility of real-time, in-situ aerosol mass spectrometric measurements to characterize metal nanoparticles obtained directly from the synthesis process line, including their chemical composition, shape, and contamination, providing the potential for effective optimization of process operating parameters.
文摘Live observations of growing nanowires using in situ transmission electron microscopy （TEM） is becoming an increasingly important tool for understanding the dynamic processes occurring during nanowire growth. Here we present observations of growing InAs nanowires, which constitute the first reported in situ growth of a In-V compound in a transmission electron microscope. Real time observations of events taking place over longer growth lengths were possible due to the high growth rates of up to I nm/s that were achieved. Straight growth （mainly in 〈111〉B directions） was observed at uniform temperature and partial pressure while intentional fluctuations in these conditions caused the nanowires to form kinks and change growth direction. The mechanisms behind the kinking are discussed in detail. In situ observations of nanowire kinking has previously only been reported for nonpolar diamond structure type materials （such as Si）, but here we present results for a polar zinc blende structure （InAs）. In this study a closed cell with electron and X-ray transparent a-SiN windows was used in a conventional high resolution transmission electron microscope, enabling high resolution imaging and compositional analysis in between the growth periods.
文摘Aerosol technology provides efficient methods for producing nanoparticles with well-controlled composition and size distribution. This review provides an overview of methods and results obtained by using aerosol technology for producing nanostruetures for a variety of applications in semiconductor physics and device technology. Examples are given from： production of metal and metal alloy particles： semiconductor nanoparticles; semiconductor nanowires, grown both in the aerosol phase and on substrates; physics studies based on individual aerosol-generated devices; and large area deviees based on aerosol particles.
基金This work was performed within the Nanometer Structure Consortium at Lund University and supported by the Swedish Research Council(VR),the Swedish Foundation for Strategic Research(SSF),the EU program AMON-RA(No.214814)the Knut and Alice Wallenberg Foundation.
文摘Highly controlled particle-assisted growth of semiconductor nanowires has been performed for many years,and a number of novel nanowire-based devices have been demonstrated.Full control of the epitaxial growth is required to optimize the performance of devices,and gold seed particles are known to provide the most controlled growth.Successful nanowire growth from gold particles generated and deposited by various different methods has been reported,but no investigation has yet been performed to compare the effects of gold particle generation and deposition methods on nanowire growth.In this article we present a direct comparative study of the effect of the gold particle creation and deposition methods on nanowire growth characteristics and nanowire crystal structure,and investigate the limitations of the different generation and deposition methods used.
文摘In-air epitaxy of nanostructures(Aerotaxy)has recently emerged as a viable route for fast,large-scale production.In this study,we use small-a ngle X-ray scatteri ng to perform direct in-flight characterizati ons of the first step of this process,i.e.,the en gineered formatio n of Au and Pt aerosol nan oparticles by spark gen erati on in a flow of N2 gas.This represe nts a particular challe nge for characterizati on because the particle density can be extremely low in con trolled production.The particles produced are exami ned duri ng producti on at operatio nal pressures close to atmospheric conditions and exhibit a log no rmal size distributi on ranging from 5-100nm.The Au and Pt particle productio n and detection are compared.We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding domi nant physical properties,in cludi ng the average particle diameter and sphericity,as in flue need by particle sintering and the prese nee of aggregates.We observe highly sorted and sin tered spherical Au nano particles at ultra-dilute concen tratio ns(<5×10^5 particles/cm^3)corresponding to a volume fraction below 3×10^-10,which is orders of magnitude below that of previously measured aerosols.We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis.Our study indicates that with high-intensity synchrotron beams and careful con sideratio n of backgro und removal,size and shape info rmati on can be obtai ned for extremely low particle concentrations with industrially relevant narrow size distributions.
