The present work was undertaken to improve superplastic ductility of friction-stir welded joints of ultrafine-grained(UFG)Al-Mg-Sc-Zr alloy.In order to suppress the undesirable abnormal grain growth,which typically oc...The present work was undertaken to improve superplastic ductility of friction-stir welded joints of ultrafine-grained(UFG)Al-Mg-Sc-Zr alloy.In order to suppress the undesirable abnormal grain growth,which typically occurs in the heavily deformed base material,the UFG material was produced at elevated temperature.It was suggested that the new processing route could reduce dislocation density in the UFG structure and thus enhance its thermal stability.It was found,however,that the new approach resulted in a relatively high fraction of low-angle boundaries which,in turn,retarded grain-boundary sliding during subsequent superplastic tests.Therefore,despite the successful inhibition of the abnormal grain growth in the base-material zone,the superplastic deformation was still preferentially concentrated in the fully-recrystallized stir zone of the material.As a result,the maximal elongation-to-failure did not exceed 700%.展开更多
As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows ar...As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows are being rigorously fabricated in the factory. The lowerpart of the KSTAR such as cryostat base and gravity support has been almost finished in itsfabrication. There are also great progresses and significant results in manufacturing of thesuperconducting magnet, including four Toroidal Field (TF) coils, lower and upper PF7 coils whichare the largest Poloidal Field (PF) coils. The TFOO coil, which has been made for test and back-upof the TF magnet system, was successfully tested in the cool-down and current charging. As thefabrications and procurements of major structures have been actively proceeded, assembly works werealso launched from Aug. 2003. More detailed description on these status, results, and plans will bedescribed in this paper.展开更多
Charge transport characteristics of Cd_（0.95）Mn_（0.05）Te：In radiation detectors have been evaluated by combining time resolved current transient measurements with time of flight charge transient measurements.The ...Charge transport characteristics of Cd_（0.95）Mn_（0.05）Te：In radiation detectors have been evaluated by combining time resolved current transient measurements with time of flight charge transient measurements.The shapes of the measured current pulses have been interpreted with respect to a concentration of net positive space-charge, which has resulted in an electric field gradient across the detector bulk.From the recorded current pulses the charge collection efficiency of the detector was found to approach 100%.From the evolution of the charge collection efficiency with applied bias,the electron mobility-lifetime product ofμ_nτ_n =（8.5±0.4）×10^（-4） cm^2/V has been estimated.The electron transit time was determined using both transient current technique and time of flight measurements in the bias range of 100-1900 V.From the dependence of drift velocity on applied electric field the electron mobility was found to beμ_n =（718±55） cm^2/（V·s） at room temperature.展开更多
基金financially supported by the Russian Science Foundation(No.18-79-10174)。
文摘The present work was undertaken to improve superplastic ductility of friction-stir welded joints of ultrafine-grained(UFG)Al-Mg-Sc-Zr alloy.In order to suppress the undesirable abnormal grain growth,which typically occurs in the heavily deformed base material,the UFG material was produced at elevated temperature.It was suggested that the new processing route could reduce dislocation density in the UFG structure and thus enhance its thermal stability.It was found,however,that the new approach resulted in a relatively high fraction of low-angle boundaries which,in turn,retarded grain-boundary sliding during subsequent superplastic tests.Therefore,despite the successful inhibition of the abnormal grain growth in the base-material zone,the superplastic deformation was still preferentially concentrated in the fully-recrystallized stir zone of the material.As a result,the maximal elongation-to-failure did not exceed 700%.
基金the Korean Ministry of Science and Technology under the KSTAR project contract
文摘As there is substantial progress in the KSTAR tokamak engineering, all themajor structures and sub-systems are under fabrication and in procurement phase. The vacuum vessel,port, cryostat cylinder, lid, and bellows are being rigorously fabricated in the factory. The lowerpart of the KSTAR such as cryostat base and gravity support has been almost finished in itsfabrication. There are also great progresses and significant results in manufacturing of thesuperconducting magnet, including four Toroidal Field (TF) coils, lower and upper PF7 coils whichare the largest Poloidal Field (PF) coils. The TFOO coil, which has been made for test and back-upof the TF magnet system, was successfully tested in the cool-down and current charging. As thefabrications and procurements of major structures have been actively proceeded, assembly works werealso launched from Aug. 2003. More detailed description on these status, results, and plans will bedescribed in this paper.
基金supported in part by the Cooperative Research Centre for Biomedical Imaging Development
文摘Charge transport characteristics of Cd_（0.95）Mn_（0.05）Te：In radiation detectors have been evaluated by combining time resolved current transient measurements with time of flight charge transient measurements.The shapes of the measured current pulses have been interpreted with respect to a concentration of net positive space-charge, which has resulted in an electric field gradient across the detector bulk.From the recorded current pulses the charge collection efficiency of the detector was found to approach 100%.From the evolution of the charge collection efficiency with applied bias,the electron mobility-lifetime product ofμ_nτ_n =（8.5±0.4）×10^（-4） cm^2/V has been estimated.The electron transit time was determined using both transient current technique and time of flight measurements in the bias range of 100-1900 V.From the dependence of drift velocity on applied electric field the electron mobility was found to beμ_n =（718±55） cm^2/（V·s） at room temperature.
