期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Present Status of the KSTAR Superconducting Magnet System Development 被引量:1
1
作者 Keeman Kim H.K.Park +26 位作者 K.R.Park B.S.Lim S.I.Lee M.K.Kim Y.Chu W.H.Chung S.H.Baek J.Y.Cho H.Yonekawa A.Chertovskikh Y.B.Chang j.s.kim C.S.Kim D.J.Kim N.H.Song K.P.Kim Y.J.Song I.S.Woo W.S.Han D.K.Lee Y.K.Oh K.W.Cho J.S.Park G.S.Lee H.J.Lee T.K.Ko S.J.Lee 《Plasma Science and Technology》 SCIE EI CAS CSCD 2004年第5期2445-2450,共6页
The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusio... The mission of Korea Superconducting Tokamak Advanced Research (KSTAR)project is to develop an advanced steady-state superconducting tokamak for establishing a scientificand technological basis for an attractive fusion reactor. Because one of the KSTAR mission is toachieve a steady-state operation, the use of superconducting coils is an obvious choice for themagnet system. The KSTAR superconducting magnet system consists of 16 Toroidal Field (TF) coils and14 Poloidal Field (PF) coils. Internally-cooled Cable-In-Conduit Conductors (CICC) are put into usein both the TF and PF coil systems. The TF coil system provides a field of 3.5 T at the plasmacenter and the PF coil system is able to provide a flux swing of 17 V-sec. The major achievement inKSTAR magnet-system development includes the development of CICC, the development of a full-size TFmodel coil, the development of a coil system for background magnetic-field generation , theconstruction of a large-scale superconducting magnet and CICC test facility. TF and PF coils are inthe stage of fabrication to pave the way for the scheduled completion of KSTAR by the end of 2006. 展开更多
关键词 superconducting magnet KSTAR CICC
在线阅读 下载PDF
镍作为活化剂其粒度对钨粉压坯活化烧结的影响 被引量:1
2
作者 Y.L.Kim j.s.kim +2 位作者 I.H.Moon 陈妙农 郭丽平 《电工合金文集》 1989年第4期53-57,共5页
早在一九二九年,瓦西克(Vacek)已经阐明加入少量的Ni能降低W粉坯块的烧结温度。现在已提出了解释这一作用的一些机构。然而,由于对引入的假设有争议,因此还没有一种解释能被普遍接受为正确的模型。他们都未能对压坯在烧结初始阶段产生... 早在一九二九年,瓦西克(Vacek)已经阐明加入少量的Ni能降低W粉坯块的烧结温度。现在已提出了解释这一作用的一些机构。然而,由于对引入的假设有争议,因此还没有一种解释能被普遍接受为正确的模型。他们都未能对压坯在烧结初始阶段产生显著致密化时,Ni可能起的作用做出具体的解释。人们一直认为,烧结性能可能取决于加Ni的方式,即意味着Ni在初始阶段的作用在烧结机构中是重要的。而Ni的初始状态,即Ni的初始分布和粒度也是重要的,因为添加物的物理状态明显的与将其加入W粉所采用的方法有关。例如。 展开更多
关键词 镍活化剂 粒度 钨粉 烧结性能
在线阅读 下载PDF
喷吹CaO基熔剂控制铝脱氧镇静钢的氧化物夹杂形态
3
作者 j.s.kim 陈怡然 《武钢技术》 CAS 1992年第8期25-30,共6页
1.前言浦项钢铁公司光阳厂的第一炼钢车间的主要产品是铝脱氧镇静钢。去除脱氧产物的操作是进行吹 Ar 和 RH 处理。然而,钢中小于5μm 的 Al_2O_3难以上浮去除。这些细小的Al_2O_3夹杂在连铸过程中可导致中间包水口堵塞,甚至使浇铸中断... 1.前言浦项钢铁公司光阳厂的第一炼钢车间的主要产品是铝脱氧镇静钢。去除脱氧产物的操作是进行吹 Ar 和 RH 处理。然而,钢中小于5μm 的 Al_2O_3难以上浮去除。这些细小的Al_2O_3夹杂在连铸过程中可导致中间包水口堵塞,甚至使浇铸中断和产品产生缺陷。因此,浦项公司采用从中间包水口喂CaAl 线的方法来避免中间包水口堵塞和控制夹杂形态。 展开更多
关键词 镇静钢 脱氧 熔剂 去夹杂
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部