Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,p...Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.展开更多
A wideband variable gain amplifier （VGA） implemented in 0.13 μm CMOS technology is presented. To optimize noise performance, an active feedback amplifier with 15 dB fixed gain is put in the front, followed by modif...A wideband variable gain amplifier （VGA） implemented in 0.13 μm CMOS technology is presented. To optimize noise performance, an active feedback amplifier with 15 dB fixed gain is put in the front, followed by modified Cherry-Hooper amplifiers in cascade providing variable gain, which adopt dual loop feedback for band- width extension. Negative capacitive neutralization and capacitive source degeneration are employed for Miller effect compensation and DC offset cancellation, respectively. Measurement results show that the proposed VGA achieves a 35 dB gain tuning range with an upper 3-dB bandwidth larger than 3 GHz and the input 1 dB compression point of-29 dBm at the lowest gain state, while the minimum noise figure is 9 dB at the highest gain state. The core VGA （without test buffer） consumes 32 mW from 1.2 V power supply and occupies 0.48 mm2 area.展开更多
基金Key R&D Plan of Shaanxi Province(2021LLRH-05-09)Shaanxi Province Youth Talent Support Program Project(CLGC202234)Sponsored by Innovative Pilot Platform for Layered Metal Composite Materials(2024CX-GXPT-20)。
文摘Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.
基金Project supported by the National High Technology Research and Development of China(No.2009AA01Z261)the State Key Laboratory of Wireless Telecommunication,Southeast University
文摘A wideband variable gain amplifier （VGA） implemented in 0.13 μm CMOS technology is presented. To optimize noise performance, an active feedback amplifier with 15 dB fixed gain is put in the front, followed by modified Cherry-Hooper amplifiers in cascade providing variable gain, which adopt dual loop feedback for band- width extension. Negative capacitive neutralization and capacitive source degeneration are employed for Miller effect compensation and DC offset cancellation, respectively. Measurement results show that the proposed VGA achieves a 35 dB gain tuning range with an upper 3-dB bandwidth larger than 3 GHz and the input 1 dB compression point of-29 dBm at the lowest gain state, while the minimum noise figure is 9 dB at the highest gain state. The core VGA （without test buffer） consumes 32 mW from 1.2 V power supply and occupies 0.48 mm2 area.
