In order to clarify the relationship between the aerodynamic noise and the flow regime around the rotating blade of a propeller fan operated at the maximum efficiency point and the off-design point, the characteristic...In order to clarify the relationship between the aerodynamic noise and the flow regime around the rotating blade of a propeller fan operated at the maximum efficiency point and the off-design point, the characteristics of fans with different solidity impellers were analyzed experimentally. At the off-design point, the broadband noise of the high solidity fan was much larger than that of the low solidity fan because the relative velocity increased according to the solidity and the noise sources increased because of the number of blades. In the case of the low solidity fan, the broadband noise due to wake vortex shedding was generated at the off-design point in the low flow rate domain and the maximum efficiency point because the relative flow around the blade separated easily.展开更多
The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and tr...The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and transfer function by using an improved acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. As a result, the frequency characteristics of the acoustic absorption coefficient against the frequency showed a maximum value at the local frequency. The peak frequency of the acoustic absorption coefficient depended on the thickness of the background air space and the thickness of the perforated plate. As the flow rate increased through the micropores, the peak level of the acoustic absorption coefficient also increased until a flow rate of 80?l /min. As the flow rate further increased, the peak level of the acoustic absorption coefficient decreased and that of the high frequency band increased.展开更多
The flow characteristics of the centrifugal fans with different blade outlet angles are basically discussed on steady and unsteady simulations for a rectangular casing fan. The blade outlet angles of the impellers are...The flow characteristics of the centrifugal fans with different blade outlet angles are basically discussed on steady and unsteady simulations for a rectangular casing fan. The blade outlet angles of the impellers are 35° and 25° respectively. The unsteady flow behavior in the passage of the impeller 35° is quite different from that in the steady flow behavior. The large flow separation occurs in the steady flow field and unsteady flow field of the impeller 35°, the flow distribution in the circumferential direction varies remarkably and the flow separation on the blade occurs only at the back region of the fan; but the steady flow behavior in the impeller 25° is almost consistent with the unsteady flow behavior, the flow distribution of the circumferential direction doesn't vary much and the flow separation on the blade hardly occurs. When the circumferential variation of the flow in the impeller is large, the steady flow simulation is not coincident to the unsteady flow simulation.展开更多
In order to clarify the mechanism by which aerodynamic noise is generated from separated flow around an airfoil blade,the relation between the attack angle and the aerodynamic noise of the blade was analyzed using a w...In order to clarify the mechanism by which aerodynamic noise is generated from separated flow around an airfoil blade,the relation between the attack angle and the aerodynamic noise of the blade was analyzed using a wind tunnel experiment and a CFD code.In the case of rear surface separation,the separated vortex which has a large-scale structure in the direction of the blade chord is transformed into a structure that concentrates at the trailing edge with an increase in the attack angle.The aerodynamic noise level then becomes small according to the vortex scale in the blade chord.When the flow is separated at the leading edge,a separated vortex of low pressure is formed at the vicinity of the trailing edge.The pressure fluctuations on the blade surface at the vicinity of the trailing edge become large due to the vortex in the wake.It is considered that the aerodynamic noise level increases when the flow is separated at the leading edge because the separated vortex is causing the fluctuations due to wake vortex shedding.展开更多
The pitch of the spiral finned tube influences seriously to the acoustic resonance in the heat exchanger.In this research,the flow characteristics in relating to the aeolian tone from the finned cylinder are studied b...The pitch of the spiral finned tube influences seriously to the acoustic resonance in the heat exchanger.In this research,the flow characteristics in relating to the aeolian tone from the finned cylinder are studied by the numerical simulation.It is observed that the tonal noise generated from the finned tube at two pitch spaces.The ratio of the fin pitch to the cylinder diameter is changed at 0.11 and 0.27.The tone level increases and the frequency decreases with the pitch shorter.The separation flow from the cylinder generates the span-wise vortices,Karman vortices,and the separation flow from the fin generates the stream-wise vortices.When the fin pitch ratio is small,the stream-wise vortices line up to span-wise and become weak rapidly.Only the Karman vortices are remained and integrate in span.So the Karman vortex became large.This causes the low frequency and the large aeolian tone.展开更多
In the prediction theory for the broadband noise generated from a multiblade fan, the vortices in the Karman vortex street was divided into n pieces. The frequency distribution of the noise was estimated so that the S...In the prediction theory for the broadband noise generated from a multiblade fan, the vortices in the Karman vortex street was divided into n pieces. The frequency distribution of the noise was estimated so that the Strouhal number could become constant even if the wake is spread by the diffusion. From the results of the measurement of the internal flow of the fan, it was found that the noise was related to the wake characteristics of the specific location in the scroll casing where the relative flow velocity was high. The noise operating in the vicinity of the maximum efficiency point of the fan was distributed over the domain from 500 Hz to 1250 Hz. It was experimentally proved that the influence of the Karman vortex street on the noise in the domains of high and low frequencies did not exist when the distribution of the estimated sound pressure level corresponded to the measured broadband noise.展开更多
The present study focuses on the prediction of acoustic absorption performance of a perforated plate with air jets by theoretical calculations. In addition, we experimentally measured the flow rate, internal pressure,...The present study focuses on the prediction of acoustic absorption performance of a perforated plate with air jets by theoretical calculations. In addition, we experimentally measured the flow rate, internal pressure, acoustic pressure, and transfer function using an acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. We investigated the influences of background air space, flow velocity, thickness, aperture rate, and aperture diameter of a perforated plate on the acoustic absorption characteristics. The frequency characteristics of the acoustic absorption coefficient showed a maximum value at a local frequency. As the background air space increased, the peak frequency of acoustic absorption characteristics decreased. As the flow velocity passing through the apertures increased, the peak level of the acoustic absorption coefficient also increased. The theoretical results agreed well with the experimental ones qualitatively.展开更多
In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment...In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment performed with an actual fan as well as through a numerical simulation, respectively. The mechanism of the discrete fre- quency noise generated by the separated flow of the diffuser was analyzed. The optimized bare ratio was ap- proximately 17%. The flow separated inside of the diffuser generated discrete frequency noise owing to the inter- action between the reversed flow from the diffuser and the impeller rotating at the blade passing frequency. The diffuser outlet angle influenced the pressure ratio more than that by the bare ratio. Furthermore, it was confirmed that restraining the separation in the diffuser effectively decreases the fan noise.展开更多
文摘In order to clarify the relationship between the aerodynamic noise and the flow regime around the rotating blade of a propeller fan operated at the maximum efficiency point and the off-design point, the characteristics of fans with different solidity impellers were analyzed experimentally. At the off-design point, the broadband noise of the high solidity fan was much larger than that of the low solidity fan because the relative velocity increased according to the solidity and the noise sources increased because of the number of blades. In the case of the low solidity fan, the broadband noise due to wake vortex shedding was generated at the off-design point in the low flow rate domain and the maximum efficiency point because the relative flow around the blade separated easily.
文摘The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and transfer function by using an improved acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. As a result, the frequency characteristics of the acoustic absorption coefficient against the frequency showed a maximum value at the local frequency. The peak frequency of the acoustic absorption coefficient depended on the thickness of the background air space and the thickness of the perforated plate. As the flow rate increased through the micropores, the peak level of the acoustic absorption coefficient also increased until a flow rate of 80?l /min. As the flow rate further increased, the peak level of the acoustic absorption coefficient decreased and that of the high frequency band increased.
文摘The flow characteristics of the centrifugal fans with different blade outlet angles are basically discussed on steady and unsteady simulations for a rectangular casing fan. The blade outlet angles of the impellers are 35° and 25° respectively. The unsteady flow behavior in the passage of the impeller 35° is quite different from that in the steady flow behavior. The large flow separation occurs in the steady flow field and unsteady flow field of the impeller 35°, the flow distribution in the circumferential direction varies remarkably and the flow separation on the blade occurs only at the back region of the fan; but the steady flow behavior in the impeller 25° is almost consistent with the unsteady flow behavior, the flow distribution of the circumferential direction doesn't vary much and the flow separation on the blade hardly occurs. When the circumferential variation of the flow in the impeller is large, the steady flow simulation is not coincident to the unsteady flow simulation.
文摘In order to clarify the mechanism by which aerodynamic noise is generated from separated flow around an airfoil blade,the relation between the attack angle and the aerodynamic noise of the blade was analyzed using a wind tunnel experiment and a CFD code.In the case of rear surface separation,the separated vortex which has a large-scale structure in the direction of the blade chord is transformed into a structure that concentrates at the trailing edge with an increase in the attack angle.The aerodynamic noise level then becomes small according to the vortex scale in the blade chord.When the flow is separated at the leading edge,a separated vortex of low pressure is formed at the vicinity of the trailing edge.The pressure fluctuations on the blade surface at the vicinity of the trailing edge become large due to the vortex in the wake.It is considered that the aerodynamic noise level increases when the flow is separated at the leading edge because the separated vortex is causing the fluctuations due to wake vortex shedding.
文摘The pitch of the spiral finned tube influences seriously to the acoustic resonance in the heat exchanger.In this research,the flow characteristics in relating to the aeolian tone from the finned cylinder are studied by the numerical simulation.It is observed that the tonal noise generated from the finned tube at two pitch spaces.The ratio of the fin pitch to the cylinder diameter is changed at 0.11 and 0.27.The tone level increases and the frequency decreases with the pitch shorter.The separation flow from the cylinder generates the span-wise vortices,Karman vortices,and the separation flow from the fin generates the stream-wise vortices.When the fin pitch ratio is small,the stream-wise vortices line up to span-wise and become weak rapidly.Only the Karman vortices are remained and integrate in span.So the Karman vortex became large.This causes the low frequency and the large aeolian tone.
文摘In the prediction theory for the broadband noise generated from a multiblade fan, the vortices in the Karman vortex street was divided into n pieces. The frequency distribution of the noise was estimated so that the Strouhal number could become constant even if the wake is spread by the diffusion. From the results of the measurement of the internal flow of the fan, it was found that the noise was related to the wake characteristics of the specific location in the scroll casing where the relative flow velocity was high. The noise operating in the vicinity of the maximum efficiency point of the fan was distributed over the domain from 500 Hz to 1250 Hz. It was experimentally proved that the influence of the Karman vortex street on the noise in the domains of high and low frequencies did not exist when the distribution of the estimated sound pressure level corresponded to the measured broadband noise.
基金supported by JSPS KAKENHI Grant Numbers JP17K06232
文摘The present study focuses on the prediction of acoustic absorption performance of a perforated plate with air jets by theoretical calculations. In addition, we experimentally measured the flow rate, internal pressure, acoustic pressure, and transfer function using an acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. We investigated the influences of background air space, flow velocity, thickness, aperture rate, and aperture diameter of a perforated plate on the acoustic absorption characteristics. The frequency characteristics of the acoustic absorption coefficient showed a maximum value at a local frequency. As the background air space increased, the peak frequency of acoustic absorption characteristics decreased. As the flow velocity passing through the apertures increased, the peak level of the acoustic absorption coefficient also increased. The theoretical results agreed well with the experimental ones qualitatively.
文摘In order to clarify the influence of a diffuser on the charactersfics of a forward curved fan, the influence of the bare ratio and the outlet angle on the characteristics of the fan were measured through an experiment performed with an actual fan as well as through a numerical simulation, respectively. The mechanism of the discrete fre- quency noise generated by the separated flow of the diffuser was analyzed. The optimized bare ratio was ap- proximately 17%. The flow separated inside of the diffuser generated discrete frequency noise owing to the inter- action between the reversed flow from the diffuser and the impeller rotating at the blade passing frequency. The diffuser outlet angle influenced the pressure ratio more than that by the bare ratio. Furthermore, it was confirmed that restraining the separation in the diffuser effectively decreases the fan noise.
