Carbon fiber/phenolic resin composites have great potential application in the field of electronic information,where excellent structural-functional integration is required.In this work,the establishment of interfacia...Carbon fiber/phenolic resin composites have great potential application in the field of electronic information,where excellent structural-functional integration is required.In this work,the establishment of interfacial structures consisting of carbon nanotubes with different morphologies at the fiber/matrix interface is conducive to the further modulation of the mechanical,tribological,electromagnetic interference(EMI)shielding and thermal conductivity properties of carbon fiber/phenolic resin composites.Specially,array carbon nanotubes can deep into the resin matrix,effectively hindering crack extension,and constructing an electrically and thermally conductive network.Compared with the carbon fiber/phenolic composites,the tensile strength and modulus of elasticity(163.86±9.60 MPa,5.06±0.25 GPa)of the array carbon nanotubes reinforced carbon fiber/phenolic composites were enhanced by 57.09%and 22.22%.The average friction coefficient and wear rate(0.20±0.02,1.11×10^(-13)±0.13×10^(-13)m^(3)N^(−1)m^(−1))were reduced by 39.39%and 74.31%.EMI shielding effectiveness up to 40 dB in the X-band at 0.4 mm sample thickness,diffusion coefficient(0.39±0.003 mm^(2)/s)and thermal conductivity(0.54±0.004 W/(m K))were enhanced by up to 14.37%and 50.42%.This study reveals the beneficial effects of morphological changes of carbon nanotubes on the design of interfacial structure,proposes the reinforcement mechanism of array carbon nanotubes,and opens up the prospect of carbon fiber/phenolic composites for electronic applications.展开更多
Mg alloy matrix composites reinforced with short carbon fibers(C_(sf)/Mg)are considered as potential candidates for integrated structural-functional electronic parts that satisfy the requirements of lightweight,excell...Mg alloy matrix composites reinforced with short carbon fibers(C_(sf)/Mg)are considered as potential candidates for integrated structural-functional electronic parts that satisfy the requirements of lightweight,excellent mechanical properties,and heat dissipation.However,the different characteristics of C_(sf)and Mg alloy make the interface a critical issue affecting the synergistic improvement of thermal and mechanical properties of the composites.Here,Cu coating with different thicknesses is introduced to modify the C_(sf)/Mg interface,so as to simultaneously enhance the thermal and mechanical performances,which can combine the advantages of coating modification and matrix alloying.Results reveal that thermal diffusivity(TD)of 3-C_(sf)-Cu/Mg composites is as high as 22.12 mm^(2)/s and an enhancement of 52.97%is achieved compared with C_(sf)/Mg composites,as well as 16.3%enhancement of ultimate compressive strength(UCS)in the longitudinal direction,8.84%improvement of UCS in the transverse direction,and 53.08%increasement of ultimate tensile strength(UTS).Such improvement can be ascribed to the formation of intermetallic compounds.The formation of intermetallic compounds can not only effectively alleviate the lattice distortion of the matrix and decrease interfacial thermal resistance,but also bear the loads.Our work is of great significance for designing C_(sf)/Mg composites with integrated structure and function.展开更多
Stimulus-responsive actuators are novel functional devices capable of sensing external stimuli and ex-hibiting specific deformation responses.MXene,owing to its unique 2D structure and efficient energy conversion effi...Stimulus-responsive actuators are novel functional devices capable of sensing external stimuli and ex-hibiting specific deformation responses.MXene,owing to its unique 2D structure and efficient energy conversion efficiency,has bridged the gap in traditional devices and shown great potential for multiple stimulus-responsive actuators.However,the drawbacks of pure MXene films,including susceptibility to oxidation and vulnerability to shear stress,hinder their applications.Through composite modification and structural design strategies,a three-layer structured MXene-carbon nanotubes hybrid film(tHCM)is fabri-cated,exhibiting a tensile strength and fracture strain of 153.8 MPa and 4.65%,respectively,representing improvements of 598.4%and 226.8%compared to the initial film.Meanwhile,the film maintains excel-lent stability demonstrating the enhancing effects of hydrogen bonds and densely packed structure.The hybrid films demonstrate unique and facile welding features due to splicing properties,enabling the for-mation of complex configurations.In terms of electro-/photo-thermal conversion performance,the hybrid film can reach a reasonably high temperature of 250℃at low voltage(2.5 V)and 110.6℃under 150 mW cm^(-2) infrared light.Leveraging the thermal expansion mismatch between tHCM and thermoplastic films,an integrated,flexible,and weldable actuator with unique electro/photo-response is developed,and vari-ous biomimetic driving applications,particularly,the light-mediated hierarchical transmission and precise motion along predetermined trajectory are realized.This work not only provides an effective strategy for modifying MXene composite films but also advances the design of novel actuators,offering broad appli-cation prospects in fields such as stimulus-responsive actuated robots and cargo transportation.展开更多
One of the significant technological challenges in safeguarding electronic devices pertains to the modulation of electromagnetic(EM)wave jamming and the recycling of defensive shields.The synergistic effect of heterod...One of the significant technological challenges in safeguarding electronic devices pertains to the modulation of electromagnetic(EM)wave jamming and the recycling of defensive shields.The synergistic effect of heterodimensional materials can effectively enable the manipulation of EM waves by altering the nanostructure.Here we propose a novel approach for upcycling by-products of silver nanowires that can fabricate shape-tunable aerogels which enable the modulation of its interaction with microwaves by heterodimensional structure of byproducts.By-product heterodimensionality was used to design EM-wave-jamming-dissipation structures and therefore two typical tunable aerogel forms were studied.The first tunable form was aerogel film,which shielded EM interference(EMI shielding effectiveness(EMI SE)>89 dB)and the second tunable form was foam,which performed dual EM functions(SE>30 dB&reflective loss(RL)<-35 dB,effective absorption bandwidth(EAB)>6.7 GHz).We show that secondary recycled aerogels retain nearly all of their EM protection properties,making this type of closed-loop cycle an appealing option.Our findings pave the way for the development of adaptive EM functions with nanoscale regulation in a green and closed-loop cycle,and they shed light on the fundamental understanding of microwave interactions with heterodimensional structures.展开更多
Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong ...Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong their service span in critical environments.Nanoindentation results affirmed the active influ-ence of graphite flakes on elevating the toughness of the Hf_(6)Ta_(2)O_(17) coating.Besides,after being exposed to the oxyacetylene torch with a peak temperature of about 2000℃,the sample achieved near zero ab-lation(0.06 mg/s),meanwhile its porosity and mass ablation rate showed 39.5%and 60.0%reduction when compared to pure Hf_(6)Ta_(2)O_(17) sample.During exposure,the external Hf_(6)Ta_(2)O_(17) served as an oxy-gen barrier for internal graphite flakes,inversely internal graphite flakes provided a“pinning”effect on external Hf_(6)Ta_(2)O_(17),which accounted for its exceptional ablation performance.This work offers a new insight into the design of surface modification of C/C composites and other high-temperature structural materials.展开更多
Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are ve...Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are very susceptible to destructive oxidation and thus fail at elevated temperatures.Though matrix modification and coating technologies with Si-based and ultra-high temperature ceramics(UHTCs)are valid to enhance the oxidation/ablation resistance of C/Cs,it’s not sufficient to satisfy the increasing practical applications,due to the inherent brittleness of ceramics,mismatch issues between coatings and C/C substrates,and the fact that carbonaceous matrices are easily prone to high-temperature oxidation.To effectively solve the aforementioned problems,micro/nano multiscale reinforcing strategies have been developed for C/Cs and/or the coatings over the past two decades,to fabricate C/Cs with high strength and excellent high-temperature stability.This review is to systematically summarize the most recent major and important advancements in some micro/nano multiscale strategies,including nanoparticles,nanowires,carbon nanotubes/fibers,whiskers,graphene,ceramic fibers and hybrid micro/nano structures,for C/Cs and/or the coatings,to achieve high-temperature oxidation/ablation-resistant C/Cs.Finally,this review is concluded with an outlook of major unsolved problems,challenges to be met and future research advice for C/Cs with excellent comprehensive mechanical-thermal performance.It’s hoped that a better understanding of this review will be of high scientific and industrial interest,since it provides unusual and feasible new ideas to develop potential and practical C/Cs with improved high-temperature mechanical and oxidation/ablation-resistant properties.展开更多
The structure and properties of Cu-Cr-Zr alloy were studied after rapidly solidified aging and solid solution aging.At the early stage of aging （500℃ for 15 rain）, the hardness and the conductivity of the alloy rap...The structure and properties of Cu-Cr-Zr alloy were studied after rapidly solidified aging and solid solution aging.At the early stage of aging （500℃ for 15 rain）, the hardness and the conductivity of the alloy rapidly solidified are 143 HV and 72% IACS, respectively. Under the same aging condition, the hardness and electrical conductivity of the alloy solid solution treated can reach 86 HV and 47% IACS, respectively. The microstructure was analyzed, and the grain size after rapid solidification is much smaller than that after solid solution treatment. By rapidly solidified aging the fine precipitates distribute inside the grains and along the grain boundary, while by solid solution aging there are large Cr particles along the grain boundary.展开更多
Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of H...Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17),HfC-40 mol.%SiC,HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17) and HfC-60 mol.%SiC sublayers from surface to inside was designed and fabricated on the surface of C/C composites with sharp leading edge by plasma spraying.Its ablation resistance was assessed using oxyacetylene torch with a maximum temperature over 2300℃ and compared with monolayered coatings.The multilayer coating revealed preferable ablation retardation capacity evidenced by its integrated profile and less flaw quantity.Such benefits were primarily stemmed from the effective structural design and rational material selection.The former was able to reduce the thermal stress within the ablated scale,the latter contributed to rising the high-temperature resistance and oxygen barrier ability of the coating.展开更多
Extensive attention has been drawn to the development of carbon fiber composites for their application in brake disks due to the increasing demand for brake disks with high mechanical strength and better tribological ...Extensive attention has been drawn to the development of carbon fiber composites for their application in brake disks due to the increasing demand for brake disks with high mechanical strength and better tribological properties.Herein,we design SiC hexagonal nanopyramids modified carbon/carbon(SiCNPsC/C)composites,in which SiCNPs are radially grafted on the carbon fibers by the combined sol-gel and carbothermal reduction method,and pyrolytic carbon(Py C)matrix is deposited on nucleation sites including carbon fibers and SiCNPs by isothermal chemical vapor infiltration(ICVI).Benefiting from the special structure,SiCNPs-C/C composites exhibit superior mechanical and frictional performance.Compared with C/C composites,SiCNPs-C/C composites have 147%,90.3%,70.6%,and 117.9%improvement in the hardness,interlaminar shear strength,and out-of-plane and in-plane compressive strength,respectively,which is attributed to the optimized fiber/matrix(F/M)interfaces bonding and the enhanced cohesion strength of Py C matrix.In addition,the friction coefficient of SiCNPs-C/C composites increases by 25.5%,and the wear rate decreases by 38.0%.This work provides an optional design thought for the nanomaterials and enlightens the mechanical and frictional modification of composites in the field of the brakes.展开更多
Due to the limited electromagnetic wave(EMW)loss capacity and agglomeration,carbon black(CB)gradually fails to meet the increasingly harsh demanding conditions.Herein,defect-rich bamboo-like carbon nanotubes(CNTs)were...Due to the limited electromagnetic wave(EMW)loss capacity and agglomeration,carbon black(CB)gradually fails to meet the increasingly harsh demanding conditions.Herein,defect-rich bamboo-like carbon nanotubes(CNTs)were grown on CB by the process of chemical vapor deposition.CNTs prepared in situ on CB can assist it to build a developed multilevel conductive network and introduce plentiful CB/CNTs nano-interfaces.What’s more,the defects that accompany the growth of CNTs endow CNTs with a moderate conductivity and good impedance matching,thereby causing an effective microwave absorption(MA).Meanwhile,the high-density defects on CNTs can induce dipole polarization to further strengthen the EMW loss ability.The influence of CNTs with different growth time on MA performance has been explored.Profiting from the structural merits,the synthesized CB-CNT with CNTs growth time of 40 min exhibits the optimal absorbing property,which has the minimum reflection loss of-53.6 d B and maximum effective absorption bandwidth of 4.1 GHz with the thickness of 2.7 mm,covering almost the entire X band.The introduction of defect-rich CNTs significantly enhances the EMW loss ability of CB,which provides a rational strategy for the design of high-efficient microwave absorption materials.展开更多
To improve the oxidation resistance of carbon/carbon （C/C） composites, mullite coating was prepared on the surface of SiC-coated C/C composites by supersonic plasma spraying. Phases and microstructures of mullite co...To improve the oxidation resistance of carbon/carbon （C/C） composites, mullite coating was prepared on the surface of SiC-coated C/C composites by supersonic plasma spraying. Phases and microstructures of mullite coating were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The coating primarily consists of a single phase of mullite （3AI203-2SIO2）. The SEM results show that mullite coating was continuous and well bonded with the SiC inner layer without penetrating crack. Mullite coating exhibited good oxidation resistance, After 98.5 h oxidation at 1773 K and 9 thermal shock cycles between 1773 K and room temperature, the weight loss of the coated C/C composites was only 2.57%.展开更多
Tantalum carbon(TaC)alternate coatings with sublayers comprised of different crystallite morphologies were prepared on carbon/carbon composites by chemical vapor deposition.Their ablative behaviors and defending mecha...Tantalum carbon(TaC)alternate coatings with sublayers comprised of different crystallite morphologies were prepared on carbon/carbon composites by chemical vapor deposition.Their ablative behaviors and defending mechanisms were both investigated.The specimen with the sublayer composed of columnar crystals exhibited a better ablation resistance due to the toughness enhancement induced by the lami-nated structure.However,the mechanical denudation of the sample only containing acicular crystals and the coating spallation caused by superfluous gaseous products of the sample with the sublayer composed of nanocrystals both indicate their inferior anti-ablation properties.It is believed that the results will be helpful for the structural design and practical application of chemical vapor deposition(CVD)alternate coatings.展开更多
To explore the influence of sublayer numbers on the structure evolution and thermal stress level,an alternate coating consisting of ZrC-10 vol.%SiC and ZrC-70 vol.%SiC sublayers was designed in this work.With a basica...To explore the influence of sublayer numbers on the structure evolution and thermal stress level,an alternate coating consisting of ZrC-10 vol.%SiC and ZrC-70 vol.%SiC sublayers was designed in this work.With a basically consistent general thickness,three coatings constituted by 2,4 and 6 sublayers were prepared by plasma spraying,which then were assessed using an oxyacetylene torch under cyclic and long-term exposure.The coating with 6 sublayers was supposed to be the one with the best ablation property,finite element analysis also evidenced its least thermal stress among all these samples.After being ablated for 240 s,the linear and mass ablation rates of the coating with 6 sublayers decreased by 51.27%and 14.41%as compared to that with 4 sublayers.Post-test analysis proved the existence of Si-based products,which help the outmost surface to develop a dense profile.Additionally,the yielded alternate dense/porous scale had a preferable toughness,allowing it to maintain a good integrity.展开更多
Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus...Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus,developing 1D nanomaterials that have excellent morphology and structure retention in ultra-high temperature environments is of prime importance to bring their outstanding performance into full play.Herein,we report the novel solid solution((Hf_(0.5)Ta_(0.5))C)ceramic nanowires,which could not only maintain morphological and structural stability at 1900°C but also exhibit 1D nanostructures under oxyacetylene scouring and ablation at 2300°C.The morphology evolution of nanowires obeys the Rayleigh instability mechanism,and the internal structure and element distribution of nanowires remain unchanged even if the surface atoms are rearranged.The fascinating nanowires are demonstrated to have great potential as ideal reinforcement materials of composite materials and toughening phases of ceramics that are applied in ultra-high temperature environments,as well as excellent performance enhancement phases of functional materials.Our work may provide new insights into the development of ceramic nanowires and widen their applications.展开更多
Carbon nanotubes(CNTs) are fabricated in carbon cloth by ultilizing the waste gasses when fabricating hafnium carbide nanowires(HfC_(NWS)) through thermal pyrolysis of Hf-containing polymer precursor.The formed HfC_(N...Carbon nanotubes(CNTs) are fabricated in carbon cloth by ultilizing the waste gasses when fabricating hafnium carbide nanowires(HfC_(NWS)) through thermal pyrolysis of Hf-containing polymer precursor.The formed HfC_(NWS) are distributed uniformly on the surface of the carbon fibers in carbon/carbon(C/C) composites and display perfect single crystal appearance.The pyrolysis of the Hf-containing organic precursor provides hafnium and carbon source for the growth of HfC_(NWS).The released waste gasses containing CO,CH4and CO_(2)are the main carbon source for the growth of CNTs.Specifically,the flexural strength of HfC_(NWS) reinforced carbon/carbon(HfC_(NWS)-C/C) composites is enhanced by ~105% compared with pure C/C,and the CNTs/carbon cloth also displays improved electrochemical performance with respect to capacitor applications.The present study introduces a novel sustainable and eco-friendly process related to polymer-derived ceramics to form advanced ceramic nanocomposites and proposes a deep understanding of the growth mechanism of CNTs.展开更多
Both high thermal conductivity(K)and large cross-sectional area are essential for thermal dissipation materials to maximize their heat transfer capability.However,the drastic decrease of K values with the increased th...Both high thermal conductivity(K)and large cross-sectional area are essential for thermal dissipation materials to maximize their heat transfer capability.However,the drastic decrease of K values with the increased thickness makes the existing graphite/graphene films less favored for practical applications.In this work,graphite film with both large thickness and high K value is produced based on an in-situ com-position strategy between nanographene(G)and pyrocarbon(PyC)via chemical vapor deposition(CVD)using CH_(3) OH/C_(2)H_(5)OH mixed precursors.It’s found that an optimized O/C ratio of precursors facilitates the construction of ordered G skeletons within the deposited G/PyC composites.Such G/PyC compos-ites can be completely graphitized at a lower temperature than the existing products.After 2400℃ an-nealing,dense,thick,and highly aligned graphite films were prepared.Their K values reach 1350 and 1010 W m^(-1) K^(-1) at the thickness of 40 and 120μm,respectively,surpassing the existing records with similar thicknesses.More importantly,the proposed method is insensitive to the deposition substrates,and the G/PyC can be infiltrated into large-size fiber preforms as a matrix for preparing centimeter-thick high K materials.Besides,the G/PyC also exhibits better mechanical and electromagnetic shielding per-formances than the existing products,indicating a promising multifunctional application prospect.展开更多
Ablation resistance of monolithic LaB-doped ZrC coating for SiC-coated carbon/carbon composites by supersonic atmospheric plasma spray was investigated under an oxyacetylene torch with a heat flux of 4.18 MW/m~2. Resu...Ablation resistance of monolithic LaB-doped ZrC coating for SiC-coated carbon/carbon composites by supersonic atmospheric plasma spray was investigated under an oxyacetylene torch with a heat flux of 4.18 MW/m~2. Result shows that ZrC coating with 10 vol.% LaBhas a good ablation resistance compared with pure ZrC, ZrC with 20 vol.% LaBand SiC-doped ZrC coating. After ablation for 15 s, the weight is increased by 1.12 mg/s. The good ablation resistance is ascribed to the formation of a stabilized scale which consists of protective LaZrO-containing molten phase and ZrOparticles keeping the integrity of the coating.展开更多
2D carbon fiber reinforced AZ91 D matrix composites（2D-C_f/AZ91 D composites） were fabricated by liquid–solid extrusion and vacuum pressure infiltration technique（LSEVI）. In order to modify the interface between ...2D carbon fiber reinforced AZ91 D matrix composites（2D-C_f/AZ91 D composites） were fabricated by liquid–solid extrusion and vacuum pressure infiltration technique（LSEVI）. In order to modify the interface between fibers and matrix and protect the fiber, pyrolytic carbon（Py C） coating was deposited on the surface of T700 carbon fiber by chemical vapor deposition（CVD）. Microstructure observation of the composites revealed that the composites were well fabricated by LSEVI. The segregation of aluminum at fiber surface led to the formation of Mg_（17）Al_（12） precipitates at the interface. The aluminum improved the infiltration of the alloy and Py C coating protected the fibers effectively. The ultimate tensile strength of 2D-C_f/AZ91 D composites was about 400 MPa. The fracture process of 2D-C_f/AZ91 D composites was transverse fiber interface cracking–matrix transferring load–longitudinal fibers bearing load–longitudinal fibers breaking.展开更多
With the use of Ti/Ni/Cu/Ni multiple foils as interlayer,carbon/carbon（C/C） composite was bonded to Nibased superalloy GH3044 by partial transient liquid-phase bonding technique.The effect of bonding temperature on ...With the use of Ti/Ni/Cu/Ni multiple foils as interlayer,carbon/carbon（C/C） composite was bonded to Nibased superalloy GH3044 by partial transient liquid-phase bonding technique.The effect of bonding temperature on the microstructures and strengths of the joints was investigated.The results showed that gradient structural multiple interlayers composed of ‘‘C–Ti reaction layer/Ti–Ni intermetallic compound layer/Ni–Cu sosoloid/residual Cu layer/Ni-GH3044 diffusion layer＇＇ were formed between C/C composite and GH3044.The shear strength of the C/C composite/GH3044 joint reached the highest value of 26.1 MPa when the bonding temperature was 1,030 °C.In addition,the fracture morphology showed that the fracture mode changed with the increase of bonding temperature.展开更多
Polymer-derived ceramics(PDCs)method opens up new possibilities for the preparation of novel multi-phase ceramic nanocomposites owing to the molecular design of the precursors at the nanoscale level.In the current wor...Polymer-derived ceramics(PDCs)method opens up new possibilities for the preparation of novel multi-phase ceramic nanocomposites owing to the molecular design of the precursors at the nanoscale level.In the current work,ZrC coatings incorporated with polymer-derived ceramic microspheres(CMS),SiH-fOC_CMS,were deposited to enhance the ablation resistance by supersonic atmosphere plasma spraying.Upon 10.0 MW·m^(-2) plasma ablation at above 3000℃,the linear ablation rate of ZrC-SiHfOC_CMS coat-ing was reduced to 0.20μm·s^(-1),62%lower than that of the pristine ZrC coating.The improvement was ascribed to the presentence of viscous SiO_(2)/HfO_(2) molten mixed phase,rather than HfSiO4,which can ef-fectively seal pinholes and cracks.Moreover,the in-situ generated crystalline SiO_(2) had a lower oxygen diffusion rate than amorphous SiO_(2),meanwhile,m-HfO_(2) could improve the stability of SiO_(2) glassy film,thus further enhancing the ablation resistance.展开更多
基金supported by the National Natural Science Foundation of China(No.51872232)the Key Scientific and Technological Innovation Research Team of Shaanxi Province(No.2022TD-31)the Key R&D Program of Shaanxi Province(No.2021ZDLGY14-04).
文摘Carbon fiber/phenolic resin composites have great potential application in the field of electronic information,where excellent structural-functional integration is required.In this work,the establishment of interfacial structures consisting of carbon nanotubes with different morphologies at the fiber/matrix interface is conducive to the further modulation of the mechanical,tribological,electromagnetic interference(EMI)shielding and thermal conductivity properties of carbon fiber/phenolic resin composites.Specially,array carbon nanotubes can deep into the resin matrix,effectively hindering crack extension,and constructing an electrically and thermally conductive network.Compared with the carbon fiber/phenolic composites,the tensile strength and modulus of elasticity(163.86±9.60 MPa,5.06±0.25 GPa)of the array carbon nanotubes reinforced carbon fiber/phenolic composites were enhanced by 57.09%and 22.22%.The average friction coefficient and wear rate(0.20±0.02,1.11×10^(-13)±0.13×10^(-13)m^(3)N^(−1)m^(−1))were reduced by 39.39%and 74.31%.EMI shielding effectiveness up to 40 dB in the X-band at 0.4 mm sample thickness,diffusion coefficient(0.39±0.003 mm^(2)/s)and thermal conductivity(0.54±0.004 W/(m K))were enhanced by up to 14.37%and 50.42%.This study reveals the beneficial effects of morphological changes of carbon nanotubes on the design of interfacial structure,proposes the reinforcement mechanism of array carbon nanotubes,and opens up the prospect of carbon fiber/phenolic composites for electronic applications.
基金supported by the National Natural Science Foundation of China(grant no.52231004 and 52072305).
文摘Mg alloy matrix composites reinforced with short carbon fibers(C_(sf)/Mg)are considered as potential candidates for integrated structural-functional electronic parts that satisfy the requirements of lightweight,excellent mechanical properties,and heat dissipation.However,the different characteristics of C_(sf)and Mg alloy make the interface a critical issue affecting the synergistic improvement of thermal and mechanical properties of the composites.Here,Cu coating with different thicknesses is introduced to modify the C_(sf)/Mg interface,so as to simultaneously enhance the thermal and mechanical performances,which can combine the advantages of coating modification and matrix alloying.Results reveal that thermal diffusivity(TD)of 3-C_(sf)-Cu/Mg composites is as high as 22.12 mm^(2)/s and an enhancement of 52.97%is achieved compared with C_(sf)/Mg composites,as well as 16.3%enhancement of ultimate compressive strength(UCS)in the longitudinal direction,8.84%improvement of UCS in the transverse direction,and 53.08%increasement of ultimate tensile strength(UTS).Such improvement can be ascribed to the formation of intermetallic compounds.The formation of intermetallic compounds can not only effectively alleviate the lattice distortion of the matrix and decrease interfacial thermal resistance,but also bear the loads.Our work is of great significance for designing C_(sf)/Mg composites with integrated structure and function.
基金support provided by the National Natural Science Foundation of China(No.52002324)the Hong Kong Scholars Program(Nos.XJ2021073 and PolyU YZ4V)the Research Grants Council of Hong Kong GRF(No.15303123).
文摘Stimulus-responsive actuators are novel functional devices capable of sensing external stimuli and ex-hibiting specific deformation responses.MXene,owing to its unique 2D structure and efficient energy conversion efficiency,has bridged the gap in traditional devices and shown great potential for multiple stimulus-responsive actuators.However,the drawbacks of pure MXene films,including susceptibility to oxidation and vulnerability to shear stress,hinder their applications.Through composite modification and structural design strategies,a three-layer structured MXene-carbon nanotubes hybrid film(tHCM)is fabri-cated,exhibiting a tensile strength and fracture strain of 153.8 MPa and 4.65%,respectively,representing improvements of 598.4%and 226.8%compared to the initial film.Meanwhile,the film maintains excel-lent stability demonstrating the enhancing effects of hydrogen bonds and densely packed structure.The hybrid films demonstrate unique and facile welding features due to splicing properties,enabling the for-mation of complex configurations.In terms of electro-/photo-thermal conversion performance,the hybrid film can reach a reasonably high temperature of 250℃at low voltage(2.5 V)and 110.6℃under 150 mW cm^(-2) infrared light.Leveraging the thermal expansion mismatch between tHCM and thermoplastic films,an integrated,flexible,and weldable actuator with unique electro/photo-response is developed,and vari-ous biomimetic driving applications,particularly,the light-mediated hierarchical transmission and precise motion along predetermined trajectory are realized.This work not only provides an effective strategy for modifying MXene composite films but also advances the design of novel actuators,offering broad appli-cation prospects in fields such as stimulus-responsive actuated robots and cargo transportation.
基金supported by the National Key Research and Development Program of China(Grant 2021YFA0715600,2021YFA0717700,2018YFB2202900)National Natural Science Foundation of China(52192610,62274127,62374128)+5 种基金the Fundamental Research Funds for the Central Universities,2023 Qinchuangyuan Construction Two Chain Integration Special Project(23LLRH0043)Key Research and Development Program of Shaanxi Province(Grant 2024GX-YBXM-512)Foundation of Zhejiang Provincial Key Lab of Solar Energy Utilization&Energy Saving Technology(ZJS-OP-2020-11)GuangDong Basic and Applied Basic Research Foundation(Grant 2022A1515111220)the fund of the state Key Laboratory of Solidification Processing in NPU(Grant No.SKLSP202317)Young Elite Scientists Sponsorship Program by CAST,Doctoral Student Special Plan.
文摘One of the significant technological challenges in safeguarding electronic devices pertains to the modulation of electromagnetic(EM)wave jamming and the recycling of defensive shields.The synergistic effect of heterodimensional materials can effectively enable the manipulation of EM waves by altering the nanostructure.Here we propose a novel approach for upcycling by-products of silver nanowires that can fabricate shape-tunable aerogels which enable the modulation of its interaction with microwaves by heterodimensional structure of byproducts.By-product heterodimensionality was used to design EM-wave-jamming-dissipation structures and therefore two typical tunable aerogel forms were studied.The first tunable form was aerogel film,which shielded EM interference(EMI shielding effectiveness(EMI SE)>89 dB)and the second tunable form was foam,which performed dual EM functions(SE>30 dB&reflective loss(RL)<-35 dB,effective absorption bandwidth(EAB)>6.7 GHz).We show that secondary recycled aerogels retain nearly all of their EM protection properties,making this type of closed-loop cycle an appealing option.Our findings pave the way for the development of adaptive EM functions with nanoscale regulation in a green and closed-loop cycle,and they shed light on the fundamental understanding of microwave interactions with heterodimensional structures.
基金supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(Grant No.CX2021006)the National Natural Science Foundation of China(Grant Nos.91860203,51727804,and 52130205)the Fundamental Research Funds for the Central Universities(Grant No.3102019TS0409).
文摘Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong their service span in critical environments.Nanoindentation results affirmed the active influ-ence of graphite flakes on elevating the toughness of the Hf_(6)Ta_(2)O_(17) coating.Besides,after being exposed to the oxyacetylene torch with a peak temperature of about 2000℃,the sample achieved near zero ab-lation(0.06 mg/s),meanwhile its porosity and mass ablation rate showed 39.5%and 60.0%reduction when compared to pure Hf_(6)Ta_(2)O_(17) sample.During exposure,the external Hf_(6)Ta_(2)O_(17) served as an oxy-gen barrier for internal graphite flakes,inversely internal graphite flakes provided a“pinning”effect on external Hf_(6)Ta_(2)O_(17),which accounted for its exceptional ablation performance.This work offers a new insight into the design of surface modification of C/C composites and other high-temperature structural materials.
基金supported by the National Natural Science Foundation of China(Nos.91860203,51821091,51872239,52002321 and 52061135102)the China Postdoctoral Science Foundation(No.2019M660265)+3 种基金the Fundamental Research Funds for the Central Universities(China,Nos.G2019KY05116,G2020KY05125)the Innovation Talent Promotion Plan of Shaanxi Province for Science and Technology Innovation Team(No.2020TD003)the Creative Research Foundation of Science and Technology on Thermostructural Composite Materials Laboratory(Nos.614291102010517,5050200015 and 5150200033)the Shaanxi Provincial Education Department of China(No.2020JQ-170)。
文摘Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are very susceptible to destructive oxidation and thus fail at elevated temperatures.Though matrix modification and coating technologies with Si-based and ultra-high temperature ceramics(UHTCs)are valid to enhance the oxidation/ablation resistance of C/Cs,it’s not sufficient to satisfy the increasing practical applications,due to the inherent brittleness of ceramics,mismatch issues between coatings and C/C substrates,and the fact that carbonaceous matrices are easily prone to high-temperature oxidation.To effectively solve the aforementioned problems,micro/nano multiscale reinforcing strategies have been developed for C/Cs and/or the coatings over the past two decades,to fabricate C/Cs with high strength and excellent high-temperature stability.This review is to systematically summarize the most recent major and important advancements in some micro/nano multiscale strategies,including nanoparticles,nanowires,carbon nanotubes/fibers,whiskers,graphene,ceramic fibers and hybrid micro/nano structures,for C/Cs and/or the coatings,to achieve high-temperature oxidation/ablation-resistant C/Cs.Finally,this review is concluded with an outlook of major unsolved problems,challenges to be met and future research advice for C/Cs with excellent comprehensive mechanical-thermal performance.It’s hoped that a better understanding of this review will be of high scientific and industrial interest,since it provides unusual and feasible new ideas to develop potential and practical C/Cs with improved high-temperature mechanical and oxidation/ablation-resistant properties.
基金This work was supported by the National“863”High Pro-gram of China(No.2002AA331112)the Doctorate Foun-dation of Northwestern Polytechnical University(CX200409)the Science Research Foundation of Henan University of Science and Technology(No.2004ZY039).
文摘The structure and properties of Cu-Cr-Zr alloy were studied after rapidly solidified aging and solid solution aging.At the early stage of aging （500℃ for 15 rain）, the hardness and the conductivity of the alloy rapidly solidified are 143 HV and 72% IACS, respectively. Under the same aging condition, the hardness and electrical conductivity of the alloy solid solution treated can reach 86 HV and 47% IACS, respectively. The microstructure was analyzed, and the grain size after rapid solidification is much smaller than that after solid solution treatment. By rapidly solidified aging the fine precipitates distribute inside the grains and along the grain boundary, while by solid solution aging there are large Cr particles along the grain boundary.
基金supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University (No.CX2021006)the National Natural Science Foundation of China (Nos.91860203,51727804,and 52130205)+1 种基金the Fundamental Research Funds for the Central Universities (No.3102019TS0409)Creative Research Foundation of Science and Technology on Thermo-structural Composite Materials Laboratory.
文摘Carbon/carbon(C/C)composites have been acknowledged as potential candidates in aerospace vehicles,but their oxygen sensitivity still remains an enormous challenge.In this work,a novel multilayer coating consisted of HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17),HfC-40 mol.%SiC,HfC-2.5 mol.%Hf_(6)Ta_(2)O_(17) and HfC-60 mol.%SiC sublayers from surface to inside was designed and fabricated on the surface of C/C composites with sharp leading edge by plasma spraying.Its ablation resistance was assessed using oxyacetylene torch with a maximum temperature over 2300℃ and compared with monolayered coatings.The multilayer coating revealed preferable ablation retardation capacity evidenced by its integrated profile and less flaw quantity.Such benefits were primarily stemmed from the effective structural design and rational material selection.The former was able to reduce the thermal stress within the ablated scale,the latter contributed to rising the high-temperature resistance and oxygen barrier ability of the coating.
基金the National Natural Science Foundation of China(Nos.51872232,51972271,and 51872234)Natural Science Basic Research Plan in Shaanxi(No.2022JC-25)。
文摘Extensive attention has been drawn to the development of carbon fiber composites for their application in brake disks due to the increasing demand for brake disks with high mechanical strength and better tribological properties.Herein,we design SiC hexagonal nanopyramids modified carbon/carbon(SiCNPsC/C)composites,in which SiCNPs are radially grafted on the carbon fibers by the combined sol-gel and carbothermal reduction method,and pyrolytic carbon(Py C)matrix is deposited on nucleation sites including carbon fibers and SiCNPs by isothermal chemical vapor infiltration(ICVI).Benefiting from the special structure,SiCNPs-C/C composites exhibit superior mechanical and frictional performance.Compared with C/C composites,SiCNPs-C/C composites have 147%,90.3%,70.6%,and 117.9%improvement in the hardness,interlaminar shear strength,and out-of-plane and in-plane compressive strength,respectively,which is attributed to the optimized fiber/matrix(F/M)interfaces bonding and the enhanced cohesion strength of Py C matrix.In addition,the friction coefficient of SiCNPs-C/C composites increases by 25.5%,and the wear rate decreases by 38.0%.This work provides an optional design thought for the nanomaterials and enlightens the mechanical and frictional modification of composites in the field of the brakes.
基金financially supported by National Natural Science Foundation of China(52072304,52172103)Natural Science Basic Research Plan in Shaanxi(2022JC-25)+1 种基金the Key R&D Program of Shaanxi Provence(2019ZDLGY04-02)China Postdoctoral Science Foundation(2021M702659)。
文摘Due to the limited electromagnetic wave(EMW)loss capacity and agglomeration,carbon black(CB)gradually fails to meet the increasingly harsh demanding conditions.Herein,defect-rich bamboo-like carbon nanotubes(CNTs)were grown on CB by the process of chemical vapor deposition.CNTs prepared in situ on CB can assist it to build a developed multilevel conductive network and introduce plentiful CB/CNTs nano-interfaces.What’s more,the defects that accompany the growth of CNTs endow CNTs with a moderate conductivity and good impedance matching,thereby causing an effective microwave absorption(MA).Meanwhile,the high-density defects on CNTs can induce dipole polarization to further strengthen the EMW loss ability.The influence of CNTs with different growth time on MA performance has been explored.Profiting from the structural merits,the synthesized CB-CNT with CNTs growth time of 40 min exhibits the optimal absorbing property,which has the minimum reflection loss of-53.6 d B and maximum effective absorption bandwidth of 4.1 GHz with the thickness of 2.7 mm,covering almost the entire X band.The introduction of defect-rich CNTs significantly enhances the EMW loss ability of CB,which provides a rational strategy for the design of high-efficient microwave absorption materials.
基金supported by the National Natural Science Foundation of China under Grant No. 51072166 and No.50902111the "111" Project under Grant No.D08040NPU Foundation for Fundamental Research and the Research Fund of the State Key Laboratory of Solidification Processing(NWPU), China (Grant No.73-QP-2010)
文摘To improve the oxidation resistance of carbon/carbon （C/C） composites, mullite coating was prepared on the surface of SiC-coated C/C composites by supersonic plasma spraying. Phases and microstructures of mullite coating were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The coating primarily consists of a single phase of mullite （3AI203-2SIO2）. The SEM results show that mullite coating was continuous and well bonded with the SiC inner layer without penetrating crack. Mullite coating exhibited good oxidation resistance, After 98.5 h oxidation at 1773 K and 9 thermal shock cycles between 1773 K and room temperature, the weight loss of the coated C/C composites was only 2.57%.
基金supported by the National Natu-ral Science Foundations of China(Nos.51727804,52130205,and 91860203)the National Key R&D Program of China(No.2021YFA0715803)The authors also thank the Analytical&Testing Center of Northwestern Polytechnical University for the characteri-zation of our samples.
文摘Tantalum carbon(TaC)alternate coatings with sublayers comprised of different crystallite morphologies were prepared on carbon/carbon composites by chemical vapor deposition.Their ablative behaviors and defending mechanisms were both investigated.The specimen with the sublayer composed of columnar crystals exhibited a better ablation resistance due to the toughness enhancement induced by the lami-nated structure.However,the mechanical denudation of the sample only containing acicular crystals and the coating spallation caused by superfluous gaseous products of the sample with the sublayer composed of nanocrystals both indicate their inferior anti-ablation properties.It is believed that the results will be helpful for the structural design and practical application of chemical vapor deposition(CVD)alternate coatings.
基金supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical Univer-sity(No.CX2021006)the National Natural Science Foundation of China(Nos.91860203,51727804 and 52130205)+1 种基金the Fundamental Research Funds for the Central Universities(No.3102019TS0409)the Creative Research Foundation of Science and Technology on Thermo-structural Composite Materials Laboratory。
文摘To explore the influence of sublayer numbers on the structure evolution and thermal stress level,an alternate coating consisting of ZrC-10 vol.%SiC and ZrC-70 vol.%SiC sublayers was designed in this work.With a basically consistent general thickness,three coatings constituted by 2,4 and 6 sublayers were prepared by plasma spraying,which then were assessed using an oxyacetylene torch under cyclic and long-term exposure.The coating with 6 sublayers was supposed to be the one with the best ablation property,finite element analysis also evidenced its least thermal stress among all these samples.After being ablated for 240 s,the linear and mass ablation rates of the coating with 6 sublayers decreased by 51.27%and 14.41%as compared to that with 4 sublayers.Post-test analysis proved the existence of Si-based products,which help the outmost surface to develop a dense profile.Additionally,the yielded alternate dense/porous scale had a preferable toughness,allowing it to maintain a good integrity.
基金supported by the National Natural Science Foundation of China(Nos.52130205 and 51727804)the National Key R&D Program of China(No.2021YFA0715803)Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(CX2022010).
文摘Ultra-high temperature ceramic(UHTC)nanowires are potential reinforcement materials due to it combines the perfect properties of bulk materials and unique geometric properties of one-dimensional(1D)nanostructures.Thus,developing 1D nanomaterials that have excellent morphology and structure retention in ultra-high temperature environments is of prime importance to bring their outstanding performance into full play.Herein,we report the novel solid solution((Hf_(0.5)Ta_(0.5))C)ceramic nanowires,which could not only maintain morphological and structural stability at 1900°C but also exhibit 1D nanostructures under oxyacetylene scouring and ablation at 2300°C.The morphology evolution of nanowires obeys the Rayleigh instability mechanism,and the internal structure and element distribution of nanowires remain unchanged even if the surface atoms are rearranged.The fascinating nanowires are demonstrated to have great potential as ideal reinforcement materials of composite materials and toughening phases of ceramics that are applied in ultra-high temperature environments,as well as excellent performance enhancement phases of functional materials.Our work may provide new insights into the development of ceramic nanowires and widen their applications.
基金financial supports of this work by the National Natural Science Foundation of China(Nos.52130205,51727804,91860203,52061135102)the National Key R&D Program of China(No.2021YFA0715803)the China Scholarship Program,2020(CSC No.202006290179)。
文摘Carbon nanotubes(CNTs) are fabricated in carbon cloth by ultilizing the waste gasses when fabricating hafnium carbide nanowires(HfC_(NWS)) through thermal pyrolysis of Hf-containing polymer precursor.The formed HfC_(NWS) are distributed uniformly on the surface of the carbon fibers in carbon/carbon(C/C) composites and display perfect single crystal appearance.The pyrolysis of the Hf-containing organic precursor provides hafnium and carbon source for the growth of HfC_(NWS).The released waste gasses containing CO,CH4and CO_(2)are the main carbon source for the growth of CNTs.Specifically,the flexural strength of HfC_(NWS) reinforced carbon/carbon(HfC_(NWS)-C/C) composites is enhanced by ~105% compared with pure C/C,and the CNTs/carbon cloth also displays improved electrochemical performance with respect to capacitor applications.The present study introduces a novel sustainable and eco-friendly process related to polymer-derived ceramics to form advanced ceramic nanocomposites and proposes a deep understanding of the growth mechanism of CNTs.
基金financially supported by the National Natu-ral Science Foundation of China(Nos.51872234,52222204,and 52002322)the Natural Science Basic Research Plan in Shaanxi(No.2020JQ-154)+1 种基金the Key R&D Program of Shaanxi Province(No.2019ZDLGY04-02)the China Postdoctoral Science Foundation(No.2020M683556).
文摘Both high thermal conductivity(K)and large cross-sectional area are essential for thermal dissipation materials to maximize their heat transfer capability.However,the drastic decrease of K values with the increased thickness makes the existing graphite/graphene films less favored for practical applications.In this work,graphite film with both large thickness and high K value is produced based on an in-situ com-position strategy between nanographene(G)and pyrocarbon(PyC)via chemical vapor deposition(CVD)using CH_(3) OH/C_(2)H_(5)OH mixed precursors.It’s found that an optimized O/C ratio of precursors facilitates the construction of ordered G skeletons within the deposited G/PyC composites.Such G/PyC compos-ites can be completely graphitized at a lower temperature than the existing products.After 2400℃ an-nealing,dense,thick,and highly aligned graphite films were prepared.Their K values reach 1350 and 1010 W m^(-1) K^(-1) at the thickness of 40 and 120μm,respectively,surpassing the existing records with similar thicknesses.More importantly,the proposed method is insensitive to the deposition substrates,and the G/PyC can be infiltrated into large-size fiber preforms as a matrix for preparing centimeter-thick high K materials.Besides,the G/PyC also exhibits better mechanical and electromagnetic shielding per-formances than the existing products,indicating a promising multifunctional application prospect.
基金supported by the National Natural Science Foundation of China (Nos. 51521061,51502245,51472203)the "111" Project (Grant no. B08040)the Research Fund of State Key Laboratory of Solidification Processing (NWPU),China (Grant No.142-TZ-2016)
文摘Ablation resistance of monolithic LaB-doped ZrC coating for SiC-coated carbon/carbon composites by supersonic atmospheric plasma spray was investigated under an oxyacetylene torch with a heat flux of 4.18 MW/m~2. Result shows that ZrC coating with 10 vol.% LaBhas a good ablation resistance compared with pure ZrC, ZrC with 20 vol.% LaBand SiC-doped ZrC coating. After ablation for 15 s, the weight is increased by 1.12 mg/s. The good ablation resistance is ascribed to the formation of a stabilized scale which consists of protective LaZrO-containing molten phase and ZrOparticles keeping the integrity of the coating.
基金supported by the National Nature Science Foundation of China (Nos. 51472203, 51521061, 51575447 and 51432008)
文摘2D carbon fiber reinforced AZ91 D matrix composites（2D-C_f/AZ91 D composites） were fabricated by liquid–solid extrusion and vacuum pressure infiltration technique（LSEVI）. In order to modify the interface between fibers and matrix and protect the fiber, pyrolytic carbon（Py C） coating was deposited on the surface of T700 carbon fiber by chemical vapor deposition（CVD）. Microstructure observation of the composites revealed that the composites were well fabricated by LSEVI. The segregation of aluminum at fiber surface led to the formation of Mg_（17）Al_（12） precipitates at the interface. The aluminum improved the infiltration of the alloy and Py C coating protected the fibers effectively. The ultimate tensile strength of 2D-C_f/AZ91 D composites was about 400 MPa. The fracture process of 2D-C_f/AZ91 D composites was transverse fiber interface cracking–matrix transferring load–longitudinal fibers bearing load–longitudinal fibers breaking.
基金financially supported by the National Natural Science Foundation of China(Nos.51202193 and 51221001)the Fundamental Research Foundation of Northwestern Polytechnical University(No.GBKY1021)the‘‘111’’Project(No.08040)
文摘With the use of Ti/Ni/Cu/Ni multiple foils as interlayer,carbon/carbon（C/C） composite was bonded to Nibased superalloy GH3044 by partial transient liquid-phase bonding technique.The effect of bonding temperature on the microstructures and strengths of the joints was investigated.The results showed that gradient structural multiple interlayers composed of ‘‘C–Ti reaction layer/Ti–Ni intermetallic compound layer/Ni–Cu sosoloid/residual Cu layer/Ni-GH3044 diffusion layer＇＇ were formed between C/C composite and GH3044.The shear strength of the C/C composite/GH3044 joint reached the highest value of 26.1 MPa when the bonding temperature was 1,030 °C.In addition,the fracture morphology showed that the fracture mode changed with the increase of bonding temperature.
基金supported by the National Key R&D Program of China(No.N2022YFB3708600)the National Natural Science Foundation of China(Nos.52101098 and 52061135102)+1 种基金the Fund of Key Laboratory of National Defense Science and Technol-ogy(No.WDZC20235250505)The authors also thank the Analyti-cal&Testing Center of Northwestern Polytechnical University(No.2022T019)for the characterization.
文摘Polymer-derived ceramics(PDCs)method opens up new possibilities for the preparation of novel multi-phase ceramic nanocomposites owing to the molecular design of the precursors at the nanoscale level.In the current work,ZrC coatings incorporated with polymer-derived ceramic microspheres(CMS),SiH-fOC_CMS,were deposited to enhance the ablation resistance by supersonic atmosphere plasma spraying.Upon 10.0 MW·m^(-2) plasma ablation at above 3000℃,the linear ablation rate of ZrC-SiHfOC_CMS coat-ing was reduced to 0.20μm·s^(-1),62%lower than that of the pristine ZrC coating.The improvement was ascribed to the presentence of viscous SiO_(2)/HfO_(2) molten mixed phase,rather than HfSiO4,which can ef-fectively seal pinholes and cracks.Moreover,the in-situ generated crystalline SiO_(2) had a lower oxygen diffusion rate than amorphous SiO_(2),meanwhile,m-HfO_(2) could improve the stability of SiO_(2) glassy film,thus further enhancing the ablation resistance.
