The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter v...The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter vicinity, but the northeast-trending Ruichang-Wuning fault （RWF） as a regional fault extends to the epicenter nearby, appearing as the Ruichang basin and its marginal faults. Tilting of the Ruichang Basin （RCB） in the Quaternary was controlled by the RCB southeast- marginal, buried fault （RSMBF）. Shallow geophysical survey reveals that the RSMBF caused an offset of the reflection layers. Drill hole columnar section demonstrates that there are about 10-12 m displacement in the lower section of the middle-Pleistocene Series along the RSMBF, but no disruption is found in the upper section of the middle-Pleistocene Series. The RSMBF not only has activity in the Quaternary, but also coincides with the nodal plane I from the focal mechanism of the Jiujiang- Ruichang Ms 5.7 earthquake. This evidence, including aftershock distribution and isoseismic lines, strongly suggests that the RSMBF might be the seismogenic tectonics. The RWF is discontinuous at the surface, and consists of three en echelon Quaternary basins, which are the Ruichang, Fanzhen and Wuning basins. Three moderate earthquakes, the Fanzhen ML 4.9 earthquake, the Yejiapu ML 4.1 earthquake and the Jiujiang-Ruichang Ms 5.7 earthquake, have happened in the basins since 1995. The seismogenic tectonics of the Jiujiang-Ruichang Ms 5.7 earthquake is not isolated, but may be controlled by the RWF at depth, the slip of which causes the accumulation of energy for earthquake occurrence.展开更多
It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of ac...It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City”, started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions ：展开更多
Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault...Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault zone can be divided into three deformation regions, namely, the north, central and south regions. The north region lies on the eastern side of the Northwest Yunnan extensional taphrogenic belt, which is characterized by the 3 sets of rift-depression basins striking NNW, NNE and near N-S since the Pliocene time, and on its western side is the Lanping-Yunlong compressive deformation belt of the Paleogene to Neogene; the deformation in the central region is characterized by dextral strike-slip or shearing. The east Yunnan Miocene compressive deformation belt lies on the eastern side of the fault in the south, and the Tengtiaohe tensile fault depression belt is located on its west. In terms of tectonic geomorphology, the aforementioned deformation is represented by basin-range tectonics in the north, linear faulted valley-basins in the central part and compressive (or tensional) basins in the south. Among them, the great variance in elevation of the planation surfaces on both sides of the Cangshan-Erhai fault suggests prominent normal faulting along the Red River fault since the Pliocene. From the viewpoint of spatial-temporal evolution, the main active portion of the fault was the southern segment in the Paleogene-Miocene-Pliocene, which is represented by “tearing” from south to north. The main active portion of the fault has migrated to the northern segment since the Pliocene, especially in the late Quaternary, which is characterized by extensional slip from north to southeast. The size of the deformation region and the magnitude of deformation show that the eastern plate of the Red River fault has been an active plate of the relative movement of blocks.展开更多
In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency...In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency field investigations have indicated that no apparent earthquake surface rupture zones were located along these active faults or their adjacent areas.Only brittle compressive ruptures in the cement-covered pavements can be seen in Shuangshi,Taiping,Longxing and Longmen Townships,and these ruptures show that a local crustal shortening occurred in the region during the earthquake.Combining spatial distribution of the relocated aftershocks and focal mechanism solutions,it is inferred that the Lushan earthquake is classified as a typical blind reverse-fault earthquake,and it is advised that the relevant departments should pay great attention to other historically un-ruptured segments along the Longmenshan thrust belt and throughout its adjacent areas.展开更多
文摘The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter vicinity, but the northeast-trending Ruichang-Wuning fault （RWF） as a regional fault extends to the epicenter nearby, appearing as the Ruichang basin and its marginal faults. Tilting of the Ruichang Basin （RCB） in the Quaternary was controlled by the RCB southeast- marginal, buried fault （RSMBF）. Shallow geophysical survey reveals that the RSMBF caused an offset of the reflection layers. Drill hole columnar section demonstrates that there are about 10-12 m displacement in the lower section of the middle-Pleistocene Series along the RSMBF, but no disruption is found in the upper section of the middle-Pleistocene Series. The RSMBF not only has activity in the Quaternary, but also coincides with the nodal plane I from the focal mechanism of the Jiujiang- Ruichang Ms 5.7 earthquake. This evidence, including aftershock distribution and isoseismic lines, strongly suggests that the RSMBF might be the seismogenic tectonics. The RWF is discontinuous at the surface, and consists of three en echelon Quaternary basins, which are the Ruichang, Fanzhen and Wuning basins. Three moderate earthquakes, the Fanzhen ML 4.9 earthquake, the Yejiapu ML 4.1 earthquake and the Jiujiang-Ruichang Ms 5.7 earthquake, have happened in the basins since 1995. The seismogenic tectonics of the Jiujiang-Ruichang Ms 5.7 earthquake is not isolated, but may be controlled by the RWF at depth, the slip of which causes the accumulation of energy for earthquake occurrence.
文摘It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City”, started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions ：
文摘Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault zone can be divided into three deformation regions, namely, the north, central and south regions. The north region lies on the eastern side of the Northwest Yunnan extensional taphrogenic belt, which is characterized by the 3 sets of rift-depression basins striking NNW, NNE and near N-S since the Pliocene time, and on its western side is the Lanping-Yunlong compressive deformation belt of the Paleogene to Neogene; the deformation in the central region is characterized by dextral strike-slip or shearing. The east Yunnan Miocene compressive deformation belt lies on the eastern side of the fault in the south, and the Tengtiaohe tensile fault depression belt is located on its west. In terms of tectonic geomorphology, the aforementioned deformation is represented by basin-range tectonics in the north, linear faulted valley-basins in the central part and compressive (or tensional) basins in the south. Among them, the great variance in elevation of the planation surfaces on both sides of the Cangshan-Erhai fault suggests prominent normal faulting along the Red River fault since the Pliocene. From the viewpoint of spatial-temporal evolution, the main active portion of the fault was the southern segment in the Paleogene-Miocene-Pliocene, which is represented by “tearing” from south to north. The main active portion of the fault has migrated to the northern segment since the Pliocene, especially in the late Quaternary, which is characterized by extensional slip from north to southeast. The size of the deformation region and the magnitude of deformation show that the eastern plate of the Red River fault has been an active plate of the relative movement of blocks.
基金supported by the National Natural Science Foundation of China(91214201 and 40821160550)the Special Fund for Scientific Investigation of the Lushan Earthquake
文摘In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency field investigations have indicated that no apparent earthquake surface rupture zones were located along these active faults or their adjacent areas.Only brittle compressive ruptures in the cement-covered pavements can be seen in Shuangshi,Taiping,Longxing and Longmen Townships,and these ruptures show that a local crustal shortening occurred in the region during the earthquake.Combining spatial distribution of the relocated aftershocks and focal mechanism solutions,it is inferred that the Lushan earthquake is classified as a typical blind reverse-fault earthquake,and it is advised that the relevant departments should pay great attention to other historically un-ruptured segments along the Longmenshan thrust belt and throughout its adjacent areas.
