Although the plastic loading can enhance creep deformation and yield strength,the anisotropic Stress Relaxation Aging(SRA)behavior and mechanism under plastic loading remain unclear,which presents a significant challe...Although the plastic loading can enhance creep deformation and yield strength,the anisotropic Stress Relaxation Aging(SRA)behavior and mechanism under plastic loading remain unclear,which presents a significant challenge in accurately shaping aluminum alloy panels.In this study,the SRA behavior of 2195-T4 Al-Cu-Li alloys were thoroughly studied under initial loading stresses within the elastic(210/250 MPa)and plastic(380/420 MPa)ranges at 180℃by stress relaxation and tensile tests as well as microstructure characterization.The findings reveal that compared with those under elastic loadings,in-plane anisotropy(IPA)values of the stress relaxation amount,yield strength and fracture elongation under plastic loadings are reduced by 60%–80%,70%–90% and 72%–89%,respectively.Similarly,IPA values of precipitate size in grains and PrecipitationFree Zones(PFZ)width at grain boundaries under plastic loading decrease by 31.4%and 94.4%respectively.These results indicate plastic loading significantly weakens the anisotropic SRA behavior,owing to numerous uniformly distributed fine T1phases and small IPA values of both T1precipitates size and PFZ width in various loading directions.Compared with those of elastic loadingaged alloys,yield strength of plastic loading-aged alloys shows high strength-ductility because of the combined effect of closely dispersed fine T1precipitates,narrowed PFZ and numerous sheared and rotated T1phases at different locations during tensile process.The uniformly distributed larger Kernel Average Misorientation(KAM)and Schmidt factor values of the plastic loading-aged alloy,as well as the cross-slip generated,also help to enhance the strength and ductility of the alloy.展开更多
Exosomes have shown good potential in ischemic injury disease treatments.However,evidence about their effect and molecular mechanisms in osteonecrosis of femoral head(ONFH)treatment is still limited.Here,we revealed t...Exosomes have shown good potential in ischemic injury disease treatments.However,evidence about their effect and molecular mechanisms in osteonecrosis of femoral head(ONFH)treatment is still limited.Here,we revealed the cell biology characters of ONFH osteonecrosis area bone tissue in single cell scale and thus identified a novel ONFH treatment approach based on M2 macrophages-derived exosomes(M2-Exos).We further show that M2-Exos are highly effective in the treatment of ONFH by modulating the phenotypes communication between neutrophil and endothelium including neutrophil extracellular traps formation and endothelial phenotype transition.Additionally,we identified that M2-Exos’therapeutic effect is attributed to the high content of miR-93-5p and constructed miR-93-5p overexpression model in vitro and in vivo based on lentivirus and adenoassociated virus respectively.Then we found miR-93-5p can not only reduce neutrophil extracellular traps formation but also improve angiogenic ability of endothelial cells.These results provided a new theoretical basis for the clinical application of ONFH therapeutic exosomes.展开更多
The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficien...The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.展开更多
Severe lithium dendrite growth and elevated thermal runaway risks pose significant hurdles for fast-charging lithium metal batteries(LMBs)This study reports a polydopamine-functionalized hydroxyapatite/aramid(PDA@HA)h...Severe lithium dendrite growth and elevated thermal runaway risks pose significant hurdles for fast-charging lithium metal batteries(LMBs)This study reports a polydopamine-functionalized hydroxyapatite/aramid(PDA@HA)hybrid nanofibers separator to synchronously improve th fast-charging LMB's stability and safety.(1)The separator's surface,enriched with lithiophilic carbonyl and hydroxyl groups,accelerates Li~+ion desolvation,while electrophilic imine groups impede anion movement.This dual mechanism optimizes the Li^(+)-ion flux distribution on th anode,mitigating dendrite formation.(2)The polar PDA modification layer fosters the development of a Li_(3)N/LiF-rich solid electrolyt interface,further enhancing Li anode stability.Consequently,Li//Li symmetric cells with PDA@HA separators exhibit extended cycle life in L plating/stripping tests:5000 h at 1 mA cm^(-2)and 700 h at 20 mA cm^(-2),respectively,outperforming PP separators(80 h and 8 h).In LiFePO_(4)(LFP,^(2.1)mg cm^(-2))//Li full cell evaluation,the PDA@HA separator enables stable operation for 11,000 cycles at 18.2C with 87%capacity retention,significantly outperforming existing fast-charging LMB counterparts in literature.At a high LFP loading of 15.5 mg cm^(-2),the cel maintains 137.6 mAh g^(-1)(2.13 mAh cm^(-2))over 250 cycles at 3C,achieving 98%capacity retention.Moreover,the PDA@HA separato increases threshold temperature for thermal runaway and reduces the exothermic rate,intensifying the battery's thermal safety.This research underscores the importance of functional separator design in improving Li metal anode reversibility,fast-charging performance,and therma safety of LMBs.展开更多
Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers o...Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers of barium sulfate(BS)and bacterial cellulose(BC)is developed to synchronously enhance the battery's fast charging and thermal-safety performances.The regulation mechanism of the dielectric BS/BC separator in enhancing the Li^(+)ion transport and Li plating reversibility is revealed.(1)The Max-Wagner polarization electric field of the dielectric BS/BC separator can accelerate the desolvation of solvated Li^(+)ions,enhancing their transport kinetics.(2)Moreover,due to the charge balancing effect,the dielectric BS/BC separator homogenizes the electric field/Li^(+)ion flux at the graphite anode-separator interface,facilitating uniform Li plating and suppressing Li dendrite growth.Consequently,the fast-charge graphite anode with the BS/BC separator shows higher Coulombic efficiency(99.0%vs.96.9%)and longer cycling lifespan(100 cycles vs.59 cycles)than that with the polypropylene(PP)separator in the constantlithiation cycling test at 2 mA cm^(-2).The high-loading LiFePO4(15.5 mg cm^(-2))//graphite(7.5 mg cm^(-2))full cell with the BS/BC separator exhibits excellent fast charging performance,retaining 70%of its capacity after 500 cycles at a high rate of 2C,which is significantly better than that of the cell with the PP separator(retaining only 27%of its capacity after 500 cycles).More importantly,the thermally stable BS/BC separator effectively elevates the critical temperature and reduces the heat release rate during thermal runaway,thereby significantly enhancing the battery's safety.展开更多
Solid-state polymer electrolytes are crucial for advancing solid-state lithium-metal batteries owing to their flexibility,excellent manufacturability,and strong interfacial compatibility.However,their widespread appli...Solid-state polymer electrolytes are crucial for advancing solid-state lithium-metal batteries owing to their flexibility,excellent manufacturability,and strong interfacial compatibility.However,their widespread applications are hindered by low ionic conductivity at room temperature and lithium dendrite growth.Herein,we report a novel solid-state composite membrane electrolyte design that combines the vertically aligned channel structure and copolymer with a radial gradient composition.Within the vertically aligned channels,the composition of poly(vinyl ethylene carbonate-co-poly(ethylene glycol)diacrylate)(P(VEC-PEGDA)varies in a gradient along the radial direction:from the center to the wall of vertically aligned channels,the proportion of vinyl ethylene carbonate(VEC)in the copolymer decreases,while the proportion of poly(ethylene glycol)diacrylate(PEGDA)increases accordingly.It can be functionally divided into a mechanical-reinforcement layer and a fast-ion-conducting layer.The resulting solid-state composite membrane electrolyte achieves a high critical current density of 1.2 mA cm^(-2)and high ionic conductivity of 2.03 mS cm^(-1)at room temperature.Employing this composite membrane electrolyte,a Li//Li symmetric cell exhibits stable cycling for over 1850 h at 0.2 m A cm^(-2)/0.2 m A h cm^(-2),and a Li//LiFePO4(LFP)battery maintains 77.3% capacity retention at 2 C after 300 cycles.Our work provides insight into the rational design of safer and more efficient solidstate batteries through electrolyte structural engineering.展开更多
The aerospace and aviation industry has long been at the forefront of materials and processing technologies,driven by its ongoing demand for lightweight,highly reliable,and durable components.Precision manufacturing i...The aerospace and aviation industry has long been at the forefront of materials and processing technologies,driven by its ongoing demand for lightweight,highly reliable,and durable components.Precision manufacturing is a critical discipline that directly affects the performance,functionality,and safety of aircraft and aerospace vehicles.To meet the above-mentioned stringent requirements,advanced materials and cutting-edge processing technologies have evolved alongside aerospace innovations.展开更多
Konjac glucomannan（KGM） is a water-soluble polysaccharide obtained from the roots and tubers of konjac plants. Recently, a degraded product of KGM, depolymerized KGM（DKGM）, has attracted attention because of its l...Konjac glucomannan（KGM） is a water-soluble polysaccharide obtained from the roots and tubers of konjac plants. Recently, a degraded product of KGM, depolymerized KGM（DKGM）, has attracted attention because of its low viscosity, improved hydrophily, and favorable physiological functions. In this review, we describe the preparation of DKGM and its prebiotic effects. Other health benefits of DKGM, covering antioxidant and immune activity, are also discussed, as well as its safety. DKGM could be a candidate for use as a tool for the treatment of various diseases, including intestinal flora imbalance, and oxidative-and immune-related disorders.展开更多
Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high ...Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent(smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling,multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear,high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things(Io T), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm,this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.展开更多
Grain refinement to the nanocrystalline regime is the most effective way to strengthen materials but this often deteriorates the grain-size thermal stability and plasticity. Here we manufactured a nanocrystalline face...Grain refinement to the nanocrystalline regime is the most effective way to strengthen materials but this often deteriorates the grain-size thermal stability and plasticity. Here we manufactured a nanocrystalline face centred cubic Cr Co Ni medium entropy alloy with columnar grains via magnetron sputtering. Compression of CrCoNi pillars with diameters of ~1 μm revealed a record high yield strength of ~5 GPa for pillars with face centred cubic structures and engineering plastic strain of > 30%. The alloy possessed an outstanding grain-size thermal stability even at 1073 K. Both nanocrystalline grain size and a high density of nanotwins/stacking faults are critical to the exceptional yield strength. Deformation twinning, grains refinement during deformation, grain boundary sliding and random grain orientation all contribute to the large plasticity. The outstanding thermal stability is attributed to the sluggish diffusion effect and the low energy of twin boundaries.展开更多
Objective:To conduct a meta-analysis assessing the perioperative,functional and oncological outcomes of partial nephrectomy(PN)and radical nephrectomy(RN)for T1b tumours.The primary endpoints were the oncological outc...Objective:To conduct a meta-analysis assessing the perioperative,functional and oncological outcomes of partial nephrectomy(PN)and radical nephrectomy(RN)for T1b tumours.The primary endpoints were the oncological outcomes.The secondary endpoints were the perioperative and functional outcomes.Methods:A systematic literature review was performed by searching multiple databases through February 2019 to identify eligible comparative studies according to the Preferred Reporting Items for Systematic Review and Meta-analysis statement.Identified reports were assessed according to the Newcastle-Ottawa Scale for nonrandomized controlled trials.Results:Overall,13 retrospective cohort studies were included in the analysis.Patients undergoing PN were younger(weighted mean difference[WMD]3.49 years,95%confidence interval[CI]5.16 to1.82;p<0.0001)and had smaller masses(WMD0.45 cm,95%CI0.59 to0.31;p<0.0001).There were no differences in the oncological outcome,which was demonstrated by progression-free survival(hazard ratio[HR]0.70;pZ0.22),cancerspecific mortality(HR 0.91;pZ0.57)and all-cause mortality(HR 1.01;pZ0.96).The two procedures were similar in estimated blood loss(WMD16.47 mL;pZ0.53)and postoperative complications(risk ratio[RR]1.32;pZ0.10),and PN provided better renal function preservation and was related to a lower likelihood of chronic kidney disease onset(RR 0.38;pZ0.006).Conclusion:PN is an effective treatment for T1b tumours because it offers similar surgical morbidity,equivalent cancer control,and better renal preservation compared to RN.展开更多
Estrogen deficiency,which mainly occurs in postmenopausal women,is a primary reason for osteoporosis in clinical diagnosis.However,the molecular regulation of osteoporosis in menopausal females is still not adequately...Estrogen deficiency,which mainly occurs in postmenopausal women,is a primary reason for osteoporosis in clinical diagnosis.However,the molecular regulation of osteoporosis in menopausal females is still not adequately explained in the literature,with the diagnosis and treatment for osteoporosis being limited.Herein,exosomal microRNAs(miRNAs)were used to evaluate their diagnosis and prediction effects in menopausal females with osteoporosis.In this study,6 menopausal females without osteoporosis and 12 menopausal females with osteoporosis were enrolled.The serum exosomes were isolated,and the miRNA expression was detected by miRNA high-throughput sequencing.Exosomal miRNA effects were analyzed by Gene Ontology and Kyoto Encyclopedia of Genes and Genomes analyses.The miRNA-targeted genes were evaluated by Targetscan 7.2 and the protein-protein interactions(PPI)by STRING.Hub genes were analyzed by the CytoHubba app of Cytoscape.The results showed that 191 aberrant miRNAs were found in the group of menopausal females with osteoporosis,including 72 upregulated miRNAs and 121 downregulated miRNAs.Aberrant miRNAs were involved in many signaling pathways,such as the Wnt,MAPK,and Hippo pathways.Based on PPI network analysis,FBXL3,FBXL13,COPS2,UBE2D3,DCUN1D1,DCUN1D4,CUL3,FBXO22,ASB6,and COMMD2 were the 10 most notable genes in the PPI network.In conclusion,aberrant serum exosomal miRNAs were associated with an altered risk of osteoporosis in menopausal females and may act as potential biomarkers for the prediction of risk of osteoporosis in menopausal females.展开更多
Abstract Solid-state electrolytes(SSEs),being the key component of solid-state lithium batteries,have a significant impact on battery performance.Rational materials structure and composition engineering on SSEs are pr...Abstract Solid-state electrolytes(SSEs),being the key component of solid-state lithium batteries,have a significant impact on battery performance.Rational materials structure and composition engineering on SSEs are promising to improve their Li+conductivity,interfacial contact,and mechanical integrity.Among the fabrication approaches,the electrospinning technique has attracted tremendous attention due to its own merits in constructing a three-dimensional framework of SSEs with precise porosity structure,tunable materials composition,easy operation,and superior physicochemical properties.To this end,in this review,we provide a comprehensive summary of the recent development of electrospinning techniques for high-performance SSEs.Firstly,we introduce the historical development of SSEs and summarize the fundamentals,including the Li+transport mechanism and materials selection principle.Then,the versatility of electrospinning technologies in the construction of the three main types of SSEs and stabilization of lithium metal anodes is comprehensively discussed.Finally,a perspective on future research directions based on previous work is highlighted for developing high-performance solid-state lithium batteries based on electrospinning techniques.展开更多
The purpose of this review is to objectively evaluate the biochemical and pathophysiological properties of 0.9% saline （henceforth： saline） and to discuss the impact of saline infusion, specifically on systemic aci...The purpose of this review is to objectively evaluate the biochemical and pathophysiological properties of 0.9% saline （henceforth： saline） and to discuss the impact of saline infusion, specifically on systemic acid-base bal- ance and renal hemodynamics. Studies have shown that electrolyte balance, including effects of saline infusion on serum electrolytes, is often poorly understood among practicing physicians and inappropriate saline prescribing can cause increased morbidity and mortality. Large-volume （〉2 L） saline infusion in healthy adults induces hyperohloremia which is associated with metabolic acidosis, hyperkalemia, and negative protein balance. Saline overload （80 ml/kg） in rodents can cause intestinal edema and contractile dysfunction associated with activation of sodium-proton exchanger （NHE） and decrease in myosin light chain phosphorylation. Saline infusion can also adversely affect renal hemody- namics. Microperfusion experiments and real-time imaging studies have demonstrated a reduction in renal perfusion and an expansion in kidney volume, compromising 02 delivery to the renal perenchyma following saline infusion. Clinically, saline infusion for patients post abdominal and cardiovascular surgery is associated with a greater number of adverse effects including more frequent blood product transfusion and bicarbonate therapy, reduced gastric blood flow, delayed recovery of gut function, impaired cardiac contractility in response to inotropes, prolonged hospital stay, and possibly increased mortality. In critically ill patients, saline infusion, compared to balanced fluid infusions, in- creases the occurrence of acute kidney injury. In summary, saline is a highly acidic fluid. With the exception of saline infusion for patients with hypochloremic metabolic alkalosis and volume depletion due to vomiting or upper gastroin- testinal suction, indiscriminate use, especially for acutely ill patients, may cause unnecessary complications and should be avoided. More education regarding saline-related effects and adequate electrolyte management is needed.展开更多
Objective:To investigate the effect and mechanism of inhibitor everolimus on EGFR-TKI resistance NSCLC.Methods:MTT assay was used to detect proliferation of human non-small cell lung cancer cell line A549.Flow cytomet...Objective:To investigate the effect and mechanism of inhibitor everolimus on EGFR-TKI resistance NSCLC.Methods:MTT assay was used to detect proliferation of human non-small cell lung cancer cell line A549.Flow cytometry was used to detect the changes of apoptosis and cycle distribution in each group after 24 h and 48 h.RT-PCR was used to detect the changes of PTEN and 4EBP1 expression levels after 48 h of monotherapy and combination therapy.Results:MTT assay showed that everolimus had dose-dependent inhibition against growth of A549 cells.Flow cytometry showed when everolimus could induce apoptosis and induce G0/G1 phase cell cycle arrest,which was time-dependent(P<0.05).RT-PCR showed everolimus could increase PTEN and 4EBP1 expression.Conclusions:mTOR inhibitor everolimus has an inhibitory effect on EGFR-TKI resistant NSCLC,which cannot reverse the resistance effect of EGFR-TKI resistant cell line A549.The relationship between EGFR/AKT signaling pathway and the mTOR signaling pathway and the mechanism in non-small cell lung cancer need further study.展开更多
Sowing cotton directly after harvesting wheat in the Yangtze River Valley of China requires early mature of cotton without yield reduction.Boll-setting period synchronisation and more yield bolls distributed at the up...Sowing cotton directly after harvesting wheat in the Yangtze River Valley of China requires early mature of cotton without yield reduction.Boll-setting period synchronisation and more yield bolls distributed at the upper and middle canopy layers are also required for harvesting.The objective of this study is to quantify the individual and interaction effects of plant density and plant growth regulator mepiquat chloride(MC)on temporal and spatial distributions of yield bolls,as well as yield and yield components.During the 2013–2016 cotton growing seasons,the experiments were conducted on a shortseason cotton cultivar CRRI50 at Yangzhou University,China.Various combinations of plant density(12.0,13.5 and 15.0 plants m^(–2))and MC dose(180,270 and 360 g ha^(–1))were applied on cotton plants.The combination of 13.5 plants m^(–2)and 270 g ha^(–1)MC resulted in the greatest boll number per unit area,the highest daily boll setting number and more than 90%of bolls positioned within 45–80 cm above the ground.In conclusion,appropriate MC dose in combination of high plant density could synchronize boll-setting period and retain more bolls at the upper and middle canopy layers without yield reduction in the system of direct-seeded cotton after wheat harvest,and thus overcome the labor-intensive problem in current transplanting cropping system.展开更多
The hepatitis B virus(HBV) is a global public health challenge due to its highly contagious nature. It is estimated that almost 300 million people live with chronic HBV infection annually. Although nucleoside analogs ...The hepatitis B virus(HBV) is a global public health challenge due to its highly contagious nature. It is estimated that almost 300 million people live with chronic HBV infection annually. Although nucleoside analogs markedly reduce the risk of liver disease progression, the analogs do not fully eradicate the virus. As such, new treatment options and drugs are urgently needed. Psoralen is a nourishing monomer of Chinese herb and is known to inhibit virus replication and inactivate viruses. In this study, we evaluated the potential of psoralen as an anti-HBV agent.Quantitative PCR and Southern blot analysis revealed that psoralen inhibited HBV replication in Hep G2.2.15 cells in a concentration-dependent manner. Moreover, psoralen was also active against the 3TC/ETV-dual-resistant HBV mutant. Further investigations revealed that psoralen suppressed both HBV RNA transcription and core protein expression. The transcription factor FOXO1, a known target for PGC1α co-activation, binds to HBV precore/core promoter enhancer II region and activates HBV RNA transcription. Co-immunoprecipitation showed that psoralen suppressed the expression of FOXO1, thereby decreasing the binding of FOXO1 co-activator PGC1αto the HBV promoter. Overall, our results demonstrate that psoralen suppresses HBV RNA transcription by downregulating the expression of FOXO1 resulting in a reduction of HBV replication.展开更多
As the main inorganic component of human bones and teeth,hydroxyapatite(HAP)materials have been widely investigated for various applications especially in the biomedical field.Recently,HAP nanowires(HAP NWs)have attra...As the main inorganic component of human bones and teeth,hydroxyapatite(HAP)materials have been widely investigated for various applications especially in the biomedical field.Recently,HAP nanowires(HAP NWs)have attracted research interest in the energy and environment-related fields owing to their advantages such as excellent biocompatibility and bioactivity,high-thermal stability,surface modification and functionalization,and selfassembly to form nanoscale porous networked structure.In this review,we first briefly discuss the synthesis of HAP NWs.Then we focus on summarizing the foremost advances in energy and environment-related applications of HAP NWs,including the battery,solar energy-assisted water evaporation,light-driven self-propelled device,thermal insulation,fireresistant inorganic paper,water purification,air purification,molecular detection,superhydrophobic surface,and high-strength nanocomposite materials.In addition,the future research directions on HAP NWs and their energy and environmental applications are proposed.This review aims to provide inspiration and stimulate extensive future studies in the energy and environmental applications of HAP NWs and other inorganic NWs.展开更多
Non-isothermal Creep Age Forming(CAF),including loading,heating,holding,cooling and springback stages,is an advanced forming technique for manufacturing high performance large integral panels at short production perio...Non-isothermal Creep Age Forming(CAF),including loading,heating,holding,cooling and springback stages,is an advanced forming technique for manufacturing high performance large integral panels at short production period and low cost.However,the creep deformation and aging precipitation during heating stage is often neglected in experiments and modeling,leading to low forming precision.To achieve shape forming and property tailoring simultaneously,a deep understanding of the non-isothermal creep aging behavior and the establishment of predictive models are urgently required.A new five-stage creep feature of Al-Cu-Li alloy during the non-isothermal creep aging is observed.The microstructural interactions between the dislocations,solute atoms,Guinier Preston zones(GP zones)and T1 precipitates are found to dominate the five-stage creep aging behavior.The physical-based model considering temperature evolution history is established to describe the five-stage creep feature.The springback and yield strength of non-isothermal creep age formed plates with different thicknesses are predicted and compared by non-isothermal CAF experiments and corresponding simulations.The CAF experiments show that the springback and yield strength of the non-isothermal creep age formed plate are 62.1%and 506 MPa,respectively.Simulation results are in good agreement with experimental results.The proposed model broadens the application of traditional CAF models that mainly focus on isothermal conditions.展开更多
AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage ar...AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage artificial cooling in this work,viz.local water cooling and artificial cooling.The microstructure developed consecutively as a result of discontinuous dynamic recrystallization(DDRX)for the AEBed samples.{10-12}tensile twinning also played an important role for the AEB with local water cooling at the initial extrusion stage in the container.Local water cooling could further reduce the DRXed grain size to~2.1µm comparing that without water cooling.And the grain growth rate was reduced by artificial cooling out of extrusion die.Under the combination of two-stage cooling,the fine DRXed grains at sizing band were almost retained with average grain size of~2.3µm after the sheet out of extrusion die,and the unDRXed grains with high residual dislocation density accumulation were also reserved.The tensile tests results indicated that a good strength-ductility balance with a high ultimate tensile strength(319 MPa vs.412 MPa)and fracture elongation(19.9%vs.30.3%)were obtained.The strength enhancement was mainly owing to the grain refinement and local residual plastic strain reserved by the artificial cooling.The excellent ductility originated from fine DRXed microstructure and ED-tilt double peak texture.展开更多
基金support from the Key Program of the National Natural Science Foundation of China(No.51235010)。
文摘Although the plastic loading can enhance creep deformation and yield strength,the anisotropic Stress Relaxation Aging(SRA)behavior and mechanism under plastic loading remain unclear,which presents a significant challenge in accurately shaping aluminum alloy panels.In this study,the SRA behavior of 2195-T4 Al-Cu-Li alloys were thoroughly studied under initial loading stresses within the elastic(210/250 MPa)and plastic(380/420 MPa)ranges at 180℃by stress relaxation and tensile tests as well as microstructure characterization.The findings reveal that compared with those under elastic loadings,in-plane anisotropy(IPA)values of the stress relaxation amount,yield strength and fracture elongation under plastic loadings are reduced by 60%–80%,70%–90% and 72%–89%,respectively.Similarly,IPA values of precipitate size in grains and PrecipitationFree Zones(PFZ)width at grain boundaries under plastic loading decrease by 31.4%and 94.4%respectively.These results indicate plastic loading significantly weakens the anisotropic SRA behavior,owing to numerous uniformly distributed fine T1phases and small IPA values of both T1precipitates size and PFZ width in various loading directions.Compared with those of elastic loadingaged alloys,yield strength of plastic loading-aged alloys shows high strength-ductility because of the combined effect of closely dispersed fine T1precipitates,narrowed PFZ and numerous sheared and rotated T1phases at different locations during tensile process.The uniformly distributed larger Kernel Average Misorientation(KAM)and Schmidt factor values of the plastic loading-aged alloy,as well as the cross-slip generated,also help to enhance the strength and ductility of the alloy.
基金the support of the National Natural Science Foundation of China (Grant No.82272503)Natural Science Foundation of Zhejiang Province (Grant No. LQN25H060006)
文摘Exosomes have shown good potential in ischemic injury disease treatments.However,evidence about their effect and molecular mechanisms in osteonecrosis of femoral head(ONFH)treatment is still limited.Here,we revealed the cell biology characters of ONFH osteonecrosis area bone tissue in single cell scale and thus identified a novel ONFH treatment approach based on M2 macrophages-derived exosomes(M2-Exos).We further show that M2-Exos are highly effective in the treatment of ONFH by modulating the phenotypes communication between neutrophil and endothelium including neutrophil extracellular traps formation and endothelial phenotype transition.Additionally,we identified that M2-Exos’therapeutic effect is attributed to the high content of miR-93-5p and constructed miR-93-5p overexpression model in vitro and in vivo based on lentivirus and adenoassociated virus respectively.Then we found miR-93-5p can not only reduce neutrophil extracellular traps formation but also improve angiogenic ability of endothelial cells.These results provided a new theoretical basis for the clinical application of ONFH therapeutic exosomes.
基金the National Natural Science Foundation of China(No.52275378)the National Key Laboratory for Precision Hot Processing of Metals(6142909200208)。
文摘The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.
基金supported by the National Natural Science Foundation of China(Grant No.52202328,52372099,52271222)the Shanghai Sailing Program(22YF1455500)。
文摘Severe lithium dendrite growth and elevated thermal runaway risks pose significant hurdles for fast-charging lithium metal batteries(LMBs)This study reports a polydopamine-functionalized hydroxyapatite/aramid(PDA@HA)hybrid nanofibers separator to synchronously improve th fast-charging LMB's stability and safety.(1)The separator's surface,enriched with lithiophilic carbonyl and hydroxyl groups,accelerates Li~+ion desolvation,while electrophilic imine groups impede anion movement.This dual mechanism optimizes the Li^(+)-ion flux distribution on th anode,mitigating dendrite formation.(2)The polar PDA modification layer fosters the development of a Li_(3)N/LiF-rich solid electrolyt interface,further enhancing Li anode stability.Consequently,Li//Li symmetric cells with PDA@HA separators exhibit extended cycle life in L plating/stripping tests:5000 h at 1 mA cm^(-2)and 700 h at 20 mA cm^(-2),respectively,outperforming PP separators(80 h and 8 h).In LiFePO_(4)(LFP,^(2.1)mg cm^(-2))//Li full cell evaluation,the PDA@HA separator enables stable operation for 11,000 cycles at 18.2C with 87%capacity retention,significantly outperforming existing fast-charging LMB counterparts in literature.At a high LFP loading of 15.5 mg cm^(-2),the cel maintains 137.6 mAh g^(-1)(2.13 mAh cm^(-2))over 250 cycles at 3C,achieving 98%capacity retention.Moreover,the PDA@HA separato increases threshold temperature for thermal runaway and reduces the exothermic rate,intensifying the battery's thermal safety.This research underscores the importance of functional separator design in improving Li metal anode reversibility,fast-charging performance,and therma safety of LMBs.
基金financially supported by the National Natural Science Foundation of China(Grant No.52202328,52372099)the Shanghai Sailing Program(22YF1455500).
文摘Poor Li plating reversibility and high thermal runaway risks are key challenges for fast charging lithiumion batteries with graphite anodes.Herein,a dielectric and fire-resistant separator based on hybrid nanofibers of barium sulfate(BS)and bacterial cellulose(BC)is developed to synchronously enhance the battery's fast charging and thermal-safety performances.The regulation mechanism of the dielectric BS/BC separator in enhancing the Li^(+)ion transport and Li plating reversibility is revealed.(1)The Max-Wagner polarization electric field of the dielectric BS/BC separator can accelerate the desolvation of solvated Li^(+)ions,enhancing their transport kinetics.(2)Moreover,due to the charge balancing effect,the dielectric BS/BC separator homogenizes the electric field/Li^(+)ion flux at the graphite anode-separator interface,facilitating uniform Li plating and suppressing Li dendrite growth.Consequently,the fast-charge graphite anode with the BS/BC separator shows higher Coulombic efficiency(99.0%vs.96.9%)and longer cycling lifespan(100 cycles vs.59 cycles)than that with the polypropylene(PP)separator in the constantlithiation cycling test at 2 mA cm^(-2).The high-loading LiFePO4(15.5 mg cm^(-2))//graphite(7.5 mg cm^(-2))full cell with the BS/BC separator exhibits excellent fast charging performance,retaining 70%of its capacity after 500 cycles at a high rate of 2C,which is significantly better than that of the cell with the PP separator(retaining only 27%of its capacity after 500 cycles).More importantly,the thermally stable BS/BC separator effectively elevates the critical temperature and reduces the heat release rate during thermal runaway,thereby significantly enhancing the battery's safety.
基金supported by the National Natural Science Foundation of China(52372099,52202328,22461142135,22479046)the Shanghai Sailing Program(22YF1455500)the Shanghai Magnolia Talent Plan Pujiang Project(24PJD128)。
文摘Solid-state polymer electrolytes are crucial for advancing solid-state lithium-metal batteries owing to their flexibility,excellent manufacturability,and strong interfacial compatibility.However,their widespread applications are hindered by low ionic conductivity at room temperature and lithium dendrite growth.Herein,we report a novel solid-state composite membrane electrolyte design that combines the vertically aligned channel structure and copolymer with a radial gradient composition.Within the vertically aligned channels,the composition of poly(vinyl ethylene carbonate-co-poly(ethylene glycol)diacrylate)(P(VEC-PEGDA)varies in a gradient along the radial direction:from the center to the wall of vertically aligned channels,the proportion of vinyl ethylene carbonate(VEC)in the copolymer decreases,while the proportion of poly(ethylene glycol)diacrylate(PEGDA)increases accordingly.It can be functionally divided into a mechanical-reinforcement layer and a fast-ion-conducting layer.The resulting solid-state composite membrane electrolyte achieves a high critical current density of 1.2 mA cm^(-2)and high ionic conductivity of 2.03 mS cm^(-1)at room temperature.Employing this composite membrane electrolyte,a Li//Li symmetric cell exhibits stable cycling for over 1850 h at 0.2 m A cm^(-2)/0.2 m A h cm^(-2),and a Li//LiFePO4(LFP)battery maintains 77.3% capacity retention at 2 C after 300 cycles.Our work provides insight into the rational design of safer and more efficient solidstate batteries through electrolyte structural engineering.
文摘The aerospace and aviation industry has long been at the forefront of materials and processing technologies,driven by its ongoing demand for lightweight,highly reliable,and durable components.Precision manufacturing is a critical discipline that directly affects the performance,functionality,and safety of aircraft and aerospace vehicles.To meet the above-mentioned stringent requirements,advanced materials and cutting-edge processing technologies have evolved alongside aerospace innovations.
基金Project supported by the National First-Class Discipline Program of Light Industry Technology and Engineering(Nos.LITE2018-18 and LITE2018-11) of Chinathe Transformation Project for Major Scientific and Technological Achievements in Jiangsu Province(No.BA2015006)+1 种基金the Industry-Academia Cooperation Innovation Fund Project of Jiangsu Province(No.BY2016022-19)the National Key Technologies R&D Program of China for the 12th Five-year Plan(No.2012BAD33B06)
文摘Konjac glucomannan（KGM） is a water-soluble polysaccharide obtained from the roots and tubers of konjac plants. Recently, a degraded product of KGM, depolymerized KGM（DKGM）, has attracted attention because of its low viscosity, improved hydrophily, and favorable physiological functions. In this review, we describe the preparation of DKGM and its prebiotic effects. Other health benefits of DKGM, covering antioxidant and immune activity, are also discussed, as well as its safety. DKGM could be a candidate for use as a tool for the treatment of various diseases, including intestinal flora imbalance, and oxidative-and immune-related disorders.
基金the National Natural Science Foundation of China (Nos. 51775441&51835011)the National Science Fund for Excellent Young Scholars (No.51522509)Research Fund of the State Key Laboratory of Solidification Processing (NWPU) of China (KP201608)。
文摘Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent(smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling,multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear,high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things(Io T), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm,this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.
基金supported by the Australian Government under the NCRIS programsupported by the National Natural Science Foundation of China (No.51601067)+2 种基金the Science and Technology Development Program of Jilin Province (No.20160520007JH)Hongxiang Zong was supported by the National Natural Science Foundation of China (No.51871177)Xiaozhou Liao is supported by the Australian Research Council Discovery Project DP190102243。
文摘Grain refinement to the nanocrystalline regime is the most effective way to strengthen materials but this often deteriorates the grain-size thermal stability and plasticity. Here we manufactured a nanocrystalline face centred cubic Cr Co Ni medium entropy alloy with columnar grains via magnetron sputtering. Compression of CrCoNi pillars with diameters of ~1 μm revealed a record high yield strength of ~5 GPa for pillars with face centred cubic structures and engineering plastic strain of > 30%. The alloy possessed an outstanding grain-size thermal stability even at 1073 K. Both nanocrystalline grain size and a high density of nanotwins/stacking faults are critical to the exceptional yield strength. Deformation twinning, grains refinement during deformation, grain boundary sliding and random grain orientation all contribute to the large plasticity. The outstanding thermal stability is attributed to the sluggish diffusion effect and the low energy of twin boundaries.
文摘Objective:To conduct a meta-analysis assessing the perioperative,functional and oncological outcomes of partial nephrectomy(PN)and radical nephrectomy(RN)for T1b tumours.The primary endpoints were the oncological outcomes.The secondary endpoints were the perioperative and functional outcomes.Methods:A systematic literature review was performed by searching multiple databases through February 2019 to identify eligible comparative studies according to the Preferred Reporting Items for Systematic Review and Meta-analysis statement.Identified reports were assessed according to the Newcastle-Ottawa Scale for nonrandomized controlled trials.Results:Overall,13 retrospective cohort studies were included in the analysis.Patients undergoing PN were younger(weighted mean difference[WMD]3.49 years,95%confidence interval[CI]5.16 to1.82;p<0.0001)and had smaller masses(WMD0.45 cm,95%CI0.59 to0.31;p<0.0001).There were no differences in the oncological outcome,which was demonstrated by progression-free survival(hazard ratio[HR]0.70;pZ0.22),cancerspecific mortality(HR 0.91;pZ0.57)and all-cause mortality(HR 1.01;pZ0.96).The two procedures were similar in estimated blood loss(WMD16.47 mL;pZ0.53)and postoperative complications(risk ratio[RR]1.32;pZ0.10),and PN provided better renal function preservation and was related to a lower likelihood of chronic kidney disease onset(RR 0.38;pZ0.006).Conclusion:PN is an effective treatment for T1b tumours because it offers similar surgical morbidity,equivalent cancer control,and better renal preservation compared to RN.
基金This project was supported by grants from National Natural Science Foundation of China(No.31970862)Natural Science Foundation of Guangdong Province(No.2018A030313576 and No.2019A1515011335).
文摘Estrogen deficiency,which mainly occurs in postmenopausal women,is a primary reason for osteoporosis in clinical diagnosis.However,the molecular regulation of osteoporosis in menopausal females is still not adequately explained in the literature,with the diagnosis and treatment for osteoporosis being limited.Herein,exosomal microRNAs(miRNAs)were used to evaluate their diagnosis and prediction effects in menopausal females with osteoporosis.In this study,6 menopausal females without osteoporosis and 12 menopausal females with osteoporosis were enrolled.The serum exosomes were isolated,and the miRNA expression was detected by miRNA high-throughput sequencing.Exosomal miRNA effects were analyzed by Gene Ontology and Kyoto Encyclopedia of Genes and Genomes analyses.The miRNA-targeted genes were evaluated by Targetscan 7.2 and the protein-protein interactions(PPI)by STRING.Hub genes were analyzed by the CytoHubba app of Cytoscape.The results showed that 191 aberrant miRNAs were found in the group of menopausal females with osteoporosis,including 72 upregulated miRNAs and 121 downregulated miRNAs.Aberrant miRNAs were involved in many signaling pathways,such as the Wnt,MAPK,and Hippo pathways.Based on PPI network analysis,FBXL3,FBXL13,COPS2,UBE2D3,DCUN1D1,DCUN1D4,CUL3,FBXO22,ASB6,and COMMD2 were the 10 most notable genes in the PPI network.In conclusion,aberrant serum exosomal miRNAs were associated with an altered risk of osteoporosis in menopausal females and may act as potential biomarkers for the prediction of risk of osteoporosis in menopausal females.
基金Science and Technology Program of Guangdong Province of China,Grant/Award Number:2020A050515007Guangdong-Hong Kong-Macao Joint Laboratory,Grant/Award Number:2019B121205001+3 种基金Macao Science and Technology Development Fund,Grant/Award Numbers:File No.0092/2019/A2,0098/2020/A2National Natural Science Foundation of China,Grant/Award Numbers:52104309,21875040Natural Science Foundation of Hubei Province,Grant/Award Number:2021CFB011Multi-Year Research Grant(MYRG)from University of Macao,Grant/Award Number:MYRG2019-00055-IAPME。
文摘Abstract Solid-state electrolytes(SSEs),being the key component of solid-state lithium batteries,have a significant impact on battery performance.Rational materials structure and composition engineering on SSEs are promising to improve their Li+conductivity,interfacial contact,and mechanical integrity.Among the fabrication approaches,the electrospinning technique has attracted tremendous attention due to its own merits in constructing a three-dimensional framework of SSEs with precise porosity structure,tunable materials composition,easy operation,and superior physicochemical properties.To this end,in this review,we provide a comprehensive summary of the recent development of electrospinning techniques for high-performance SSEs.Firstly,we introduce the historical development of SSEs and summarize the fundamentals,including the Li+transport mechanism and materials selection principle.Then,the versatility of electrospinning technologies in the construction of the three main types of SSEs and stabilization of lithium metal anodes is comprehensively discussed.Finally,a perspective on future research directions based on previous work is highlighted for developing high-performance solid-state lithium batteries based on electrospinning techniques.
文摘The purpose of this review is to objectively evaluate the biochemical and pathophysiological properties of 0.9% saline （henceforth： saline） and to discuss the impact of saline infusion, specifically on systemic acid-base bal- ance and renal hemodynamics. Studies have shown that electrolyte balance, including effects of saline infusion on serum electrolytes, is often poorly understood among practicing physicians and inappropriate saline prescribing can cause increased morbidity and mortality. Large-volume （〉2 L） saline infusion in healthy adults induces hyperohloremia which is associated with metabolic acidosis, hyperkalemia, and negative protein balance. Saline overload （80 ml/kg） in rodents can cause intestinal edema and contractile dysfunction associated with activation of sodium-proton exchanger （NHE） and decrease in myosin light chain phosphorylation. Saline infusion can also adversely affect renal hemody- namics. Microperfusion experiments and real-time imaging studies have demonstrated a reduction in renal perfusion and an expansion in kidney volume, compromising 02 delivery to the renal perenchyma following saline infusion. Clinically, saline infusion for patients post abdominal and cardiovascular surgery is associated with a greater number of adverse effects including more frequent blood product transfusion and bicarbonate therapy, reduced gastric blood flow, delayed recovery of gut function, impaired cardiac contractility in response to inotropes, prolonged hospital stay, and possibly increased mortality. In critically ill patients, saline infusion, compared to balanced fluid infusions, in- creases the occurrence of acute kidney injury. In summary, saline is a highly acidic fluid. With the exception of saline infusion for patients with hypochloremic metabolic alkalosis and volume depletion due to vomiting or upper gastroin- testinal suction, indiscriminate use, especially for acutely ill patients, may cause unnecessary complications and should be avoided. More education regarding saline-related effects and adequate electrolyte management is needed.
基金supported by Science and Technology Planning Project of Society Development in Yunan Province(2010CA015)
文摘Objective:To investigate the effect and mechanism of inhibitor everolimus on EGFR-TKI resistance NSCLC.Methods:MTT assay was used to detect proliferation of human non-small cell lung cancer cell line A549.Flow cytometry was used to detect the changes of apoptosis and cycle distribution in each group after 24 h and 48 h.RT-PCR was used to detect the changes of PTEN and 4EBP1 expression levels after 48 h of monotherapy and combination therapy.Results:MTT assay showed that everolimus had dose-dependent inhibition against growth of A549 cells.Flow cytometry showed when everolimus could induce apoptosis and induce G0/G1 phase cell cycle arrest,which was time-dependent(P<0.05).RT-PCR showed everolimus could increase PTEN and 4EBP1 expression.Conclusions:mTOR inhibitor everolimus has an inhibitory effect on EGFR-TKI resistant NSCLC,which cannot reverse the resistance effect of EGFR-TKI resistant cell line A549.The relationship between EGFR/AKT signaling pathway and the mTOR signaling pathway and the mechanism in non-small cell lung cancer need further study.
基金supported by the National Key Research and Development Program of China(2018YFD1000900)the Natural Science Foundation of Jiangsu Higher Education Institution,China(18KJB210013 and 17KJA210003)the Natural Science Foundation of Jiangsu Province,China(BK20191439)。
文摘Sowing cotton directly after harvesting wheat in the Yangtze River Valley of China requires early mature of cotton without yield reduction.Boll-setting period synchronisation and more yield bolls distributed at the upper and middle canopy layers are also required for harvesting.The objective of this study is to quantify the individual and interaction effects of plant density and plant growth regulator mepiquat chloride(MC)on temporal and spatial distributions of yield bolls,as well as yield and yield components.During the 2013–2016 cotton growing seasons,the experiments were conducted on a shortseason cotton cultivar CRRI50 at Yangzhou University,China.Various combinations of plant density(12.0,13.5 and 15.0 plants m^(–2))and MC dose(180,270 and 360 g ha^(–1))were applied on cotton plants.The combination of 13.5 plants m^(–2)and 270 g ha^(–1)MC resulted in the greatest boll number per unit area,the highest daily boll setting number and more than 90%of bolls positioned within 45–80 cm above the ground.In conclusion,appropriate MC dose in combination of high plant density could synchronize boll-setting period and retain more bolls at the upper and middle canopy layers without yield reduction in the system of direct-seeded cotton after wheat harvest,and thus overcome the labor-intensive problem in current transplanting cropping system.
基金supported by the National Science Fund (82104240)Shanghai Science and Technology Innovation Project (20S11906200)self-deployed scientific research projects (State Key Laboratory of Drug Research) (SIMM1903ZZ-03)。
文摘The hepatitis B virus(HBV) is a global public health challenge due to its highly contagious nature. It is estimated that almost 300 million people live with chronic HBV infection annually. Although nucleoside analogs markedly reduce the risk of liver disease progression, the analogs do not fully eradicate the virus. As such, new treatment options and drugs are urgently needed. Psoralen is a nourishing monomer of Chinese herb and is known to inhibit virus replication and inactivate viruses. In this study, we evaluated the potential of psoralen as an anti-HBV agent.Quantitative PCR and Southern blot analysis revealed that psoralen inhibited HBV replication in Hep G2.2.15 cells in a concentration-dependent manner. Moreover, psoralen was also active against the 3TC/ETV-dual-resistant HBV mutant. Further investigations revealed that psoralen suppressed both HBV RNA transcription and core protein expression. The transcription factor FOXO1, a known target for PGC1α co-activation, binds to HBV precore/core promoter enhancer II region and activates HBV RNA transcription. Co-immunoprecipitation showed that psoralen suppressed the expression of FOXO1, thereby decreasing the binding of FOXO1 co-activator PGC1αto the HBV promoter. Overall, our results demonstrate that psoralen suppresses HBV RNA transcription by downregulating the expression of FOXO1 resulting in a reduction of HBV replication.
基金Financial support from The National Natural Science Foundation of China(21875277)
文摘As the main inorganic component of human bones and teeth,hydroxyapatite(HAP)materials have been widely investigated for various applications especially in the biomedical field.Recently,HAP nanowires(HAP NWs)have attracted research interest in the energy and environment-related fields owing to their advantages such as excellent biocompatibility and bioactivity,high-thermal stability,surface modification and functionalization,and selfassembly to form nanoscale porous networked structure.In this review,we first briefly discuss the synthesis of HAP NWs.Then we focus on summarizing the foremost advances in energy and environment-related applications of HAP NWs,including the battery,solar energy-assisted water evaporation,light-driven self-propelled device,thermal insulation,fireresistant inorganic paper,water purification,air purification,molecular detection,superhydrophobic surface,and high-strength nanocomposite materials.In addition,the future research directions on HAP NWs and their energy and environmental applications are proposed.This review aims to provide inspiration and stimulate extensive future studies in the energy and environmental applications of HAP NWs and other inorganic NWs.
基金supported by the National Natural Science Foundation of China(Nos.51905424,51522509,and 51235010).
文摘Non-isothermal Creep Age Forming(CAF),including loading,heating,holding,cooling and springback stages,is an advanced forming technique for manufacturing high performance large integral panels at short production period and low cost.However,the creep deformation and aging precipitation during heating stage is often neglected in experiments and modeling,leading to low forming precision.To achieve shape forming and property tailoring simultaneously,a deep understanding of the non-isothermal creep aging behavior and the establishment of predictive models are urgently required.A new five-stage creep feature of Al-Cu-Li alloy during the non-isothermal creep aging is observed.The microstructural interactions between the dislocations,solute atoms,Guinier Preston zones(GP zones)and T1 precipitates are found to dominate the five-stage creep aging behavior.The physical-based model considering temperature evolution history is established to describe the five-stage creep feature.The springback and yield strength of non-isothermal creep age formed plates with different thicknesses are predicted and compared by non-isothermal CAF experiments and corresponding simulations.The CAF experiments show that the springback and yield strength of the non-isothermal creep age formed plate are 62.1%and 506 MPa,respectively.Simulation results are in good agreement with experimental results.The proposed model broadens the application of traditional CAF models that mainly focus on isothermal conditions.
基金The authors are grateful for the National Natural Science Foundation of China(No.51905366 and U1810122)Yantai high-end talent introduction"Double Hundred Plan"(2021)Key Research and Development Program of Shanxi Province(201903D421076).
文摘AZ31 Mg alloy with heterogeneous bimodal grain structure(smaller grain size of 5-20µm and coarser grain size of 100-200µm)was subjected to accumulated extrusion bonding(AEB)at 250℃combined with two-stage artificial cooling in this work,viz.local water cooling and artificial cooling.The microstructure developed consecutively as a result of discontinuous dynamic recrystallization(DDRX)for the AEBed samples.{10-12}tensile twinning also played an important role for the AEB with local water cooling at the initial extrusion stage in the container.Local water cooling could further reduce the DRXed grain size to~2.1µm comparing that without water cooling.And the grain growth rate was reduced by artificial cooling out of extrusion die.Under the combination of two-stage cooling,the fine DRXed grains at sizing band were almost retained with average grain size of~2.3µm after the sheet out of extrusion die,and the unDRXed grains with high residual dislocation density accumulation were also reserved.The tensile tests results indicated that a good strength-ductility balance with a high ultimate tensile strength(319 MPa vs.412 MPa)and fracture elongation(19.9%vs.30.3%)were obtained.The strength enhancement was mainly owing to the grain refinement and local residual plastic strain reserved by the artificial cooling.The excellent ductility originated from fine DRXed microstructure and ED-tilt double peak texture.
