In this work,the influence of the electrode surface roughness on the self-breakdown gas switch is investigated by physical analysis,computer simulation and experiment.Cu-W electrodes of different surface roughness wer...In this work,the influence of the electrode surface roughness on the self-breakdown gas switch is investigated by physical analysis,computer simulation and experiment.Cu-W electrodes of different surface roughness were tested under the conditions of a pulse repetitive frequency of50 Hz,self-breakdown voltage of~30 kV,and peak current of~2 k A for~93000 shots(the total charge transferred was~15 C).The coefficients of variation of the self-breakdown voltage of Cu-W 0.8,Cu-W 3.2 and Cu-W 12.5 electrodes were~2.95%,~1.62%and~1.16%,respectively.With the increase of electrode roughness,the erosion area decreased continuously,indicating that the breakdown positions were more stable and the coefficient of variation of breakdown voltage decreased.The method showed that decreasing the coefficient of variation of the self-breakdown voltage by increasing the surface roughness of electrode greatly improves the stability of the self-breakdown switch,which is significant for their application in compact highpower pulse power devices over a long time with stable operation.展开更多
To guide the illuminating design to improve the on-state performances of gallium arsenide(GaAs)photoconductive semiconductor switch(PCSS),the effect of spot size on the operation mode of GaAsPCSS based on a semi-insul...To guide the illuminating design to improve the on-state performances of gallium arsenide(GaAs)photoconductive semiconductor switch(PCSS),the effect of spot size on the operation mode of GaAsPCSS based on a semi-insulating wafer with a thickness of 1 mm,triggered by a 1064-nm extrinsic laser beam with the rectangular spot,has been investigated experimentally.It is found that the variation of the spot size in length and width can act on the different parts of the output waveform integrating the characteristics of the linear and nonlinear modes,and then significantly boosts the PCSS toward different operation modes.On this basis,a two-channel model containing the active and passive parts is introduced to interpret the relevant influencing mechanisms.Results indicate that the increased spot length can peak the amplitude of static domains in the active part to enhance the development of the nonlinear switching,while the extended spot width can change the distribution of photogenerated carriers on both parts to facilitate the linear switching and weaken the nonlinear switching,which have been proved by comparing the domain evolutions under different spot sizes.展开更多
基金Huxiang Youth Talent Support Program(No.2020RC3030)State Key Laboratory of Pulsed Power Laser Technology(No.SK2021ZR02)。
文摘In this work,the influence of the electrode surface roughness on the self-breakdown gas switch is investigated by physical analysis,computer simulation and experiment.Cu-W electrodes of different surface roughness were tested under the conditions of a pulse repetitive frequency of50 Hz,self-breakdown voltage of~30 kV,and peak current of~2 k A for~93000 shots(the total charge transferred was~15 C).The coefficients of variation of the self-breakdown voltage of Cu-W 0.8,Cu-W 3.2 and Cu-W 12.5 electrodes were~2.95%,~1.62%and~1.16%,respectively.With the increase of electrode roughness,the erosion area decreased continuously,indicating that the breakdown positions were more stable and the coefficient of variation of breakdown voltage decreased.The method showed that decreasing the coefficient of variation of the self-breakdown voltage by increasing the surface roughness of electrode greatly improves the stability of the self-breakdown switch,which is significant for their application in compact highpower pulse power devices over a long time with stable operation.
基金supported in part by the Huxiang Youth Talent Support Program(No.2020RC3030)in part by the Foundation of State Key Laboratory of Pulsed Power Laser Technology(Nos.SKL2021ZR02 and SKL2021KF05)。
文摘To guide the illuminating design to improve the on-state performances of gallium arsenide(GaAs)photoconductive semiconductor switch(PCSS),the effect of spot size on the operation mode of GaAsPCSS based on a semi-insulating wafer with a thickness of 1 mm,triggered by a 1064-nm extrinsic laser beam with the rectangular spot,has been investigated experimentally.It is found that the variation of the spot size in length and width can act on the different parts of the output waveform integrating the characteristics of the linear and nonlinear modes,and then significantly boosts the PCSS toward different operation modes.On this basis,a two-channel model containing the active and passive parts is introduced to interpret the relevant influencing mechanisms.Results indicate that the increased spot length can peak the amplitude of static domains in the active part to enhance the development of the nonlinear switching,while the extended spot width can change the distribution of photogenerated carriers on both parts to facilitate the linear switching and weaken the nonlinear switching,which have been proved by comparing the domain evolutions under different spot sizes.
