A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and pot...A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and potential for increased recycled contents. Despite extensive research on grain refinement of Mg-alloys in the last few decades, currently, there is no effective grain refiner available for refining Mg-Al alloys, and our current understanding of grain refining mechanisms is not adequate to facilitate the development of effective grain refiners.Under the EPSRC(UK) Li ME Hub’s research program, substantial advances have been made in understanding the early stages of solidification covering prenucleation, heterogeneous nucleation, grain initiation and grain refinement. In this paper, we provide a comprehensive overview of grain refinement of Mg-alloys by native MgO particles. We show that native MgO particles can be made available for effective grain refinement of Mg-alloys by intensive melt shearing regardless of the alloy compositions. More importantly, we demonstrate that(1) the addition of more potent exogenous particles will not be more effective than native MgO;and(2) MgO particles are difficult to be made more impotent for grain refinement through promoting explosive grain initiation. We suggest that the most effective approach to grain refinement of Mg-alloys is to make more native MgO particles available for grain refinement through dispersion, such as by intensive melt shearing.展开更多
The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)...The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)Ho_(0.2)Y_(0.2)Er_(0.2)Yb_(0.2))_(3)NbO_(7))with hierarchical pore structures were prepared by a particle-stabilized foaming method.Atomic-scale analysis reveals that high entropy causes atom displacement and lattice distortion.The high-entropy ceramic foams exhibit high porosity(90.13%-96.13%)and ultralow thermal conductivity(0.0343-0.0592 W/(m·K))at room temperature.High-entropy ceramic foam prepared by a 20 wt%slurry sintered at 1500℃has the porosity of 96.12%and extremely low thermal conductivity of 0.0343 W/(m·K).The existence of walls and secondary pores contributes to reduced thermal conductivity.There is a temperature difference of over 800℃between frontside and backside of the sample under fire resistance test.The research indicates that these as-prepared high-entropy ceramic foams are expected to be promising thermal insulation materials.展开更多
In aerodynamics, the laminar or turbulent regime of a boundary layer has a strong influence on friction or heat transfer. In practical applications, it is sometimes necessary to trip the transition to turbulent, and a...In aerodynamics, the laminar or turbulent regime of a boundary layer has a strong influence on friction or heat transfer. In practical applications, it is sometimes necessary to trip the transition to turbulent, and a common way is by use of a roughness element （e.g. a step） on the wall. The present paper is concerned with the numerical im- plementation of such a trip in large-eddy simulations. The study is carried out on a flat-plate boundary layer con- figuration, with Reynolds number Rex=l.3x 106. First, this work brings the opportunity to introduce a practical methodology to assess convergence in large-eddy simulations. Second, concerning the trip implementation, a volume source term is proposed and is shown to yield a smoother and faster transition than a grid step. Moreover, it is easier to implement and more adaptable. Finally, two subgrid-scale models are tested： the WALE model of Nic0ud and Ducros （Flow Turbul. Combust., vol. 62, 1999） and the shear-improved Smagorinsky model of Ldv^que et al. （J. Fluid Mech., vol. 570, 2007）. Both models allow transition, but the former appears to yield a faster transition and a better prediction of friction in the turbulent regime.展开更多
文摘A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and potential for increased recycled contents. Despite extensive research on grain refinement of Mg-alloys in the last few decades, currently, there is no effective grain refiner available for refining Mg-Al alloys, and our current understanding of grain refining mechanisms is not adequate to facilitate the development of effective grain refiners.Under the EPSRC(UK) Li ME Hub’s research program, substantial advances have been made in understanding the early stages of solidification covering prenucleation, heterogeneous nucleation, grain initiation and grain refinement. In this paper, we provide a comprehensive overview of grain refinement of Mg-alloys by native MgO particles. We show that native MgO particles can be made available for effective grain refinement of Mg-alloys by intensive melt shearing regardless of the alloy compositions. More importantly, we demonstrate that(1) the addition of more potent exogenous particles will not be more effective than native MgO;and(2) MgO particles are difficult to be made more impotent for grain refinement through promoting explosive grain initiation. We suggest that the most effective approach to grain refinement of Mg-alloys is to make more native MgO particles available for grain refinement through dispersion, such as by intensive melt shearing.
基金supported by the National Natural Science Foundation of China(No.52072301)the State Key Laboratory of Solidification Processing(NPU)(No.2021-TS-08)+3 种基金the State Key Laboratory of New Ceramic and Fine Processing Tsinghua University(No.KFZD202102)the China-Poland International Collaboration Fund of National Natural Science Foundation of China(No.51961135301)the Fundamental Research Funds for the Central Universities(No.D5000210722)State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(No.P2020–009)。
文摘The introduction of porous structures into high-entropy ceramics is expected to further improve its thermal insulation performance.In this work,a series of novel rare-earth-niobate high-entropy ceramic foams((Dy_(0.2)Ho_(0.2)Y_(0.2)Er_(0.2)Yb_(0.2))_(3)NbO_(7))with hierarchical pore structures were prepared by a particle-stabilized foaming method.Atomic-scale analysis reveals that high entropy causes atom displacement and lattice distortion.The high-entropy ceramic foams exhibit high porosity(90.13%-96.13%)and ultralow thermal conductivity(0.0343-0.0592 W/(m·K))at room temperature.High-entropy ceramic foam prepared by a 20 wt%slurry sintered at 1500℃has the porosity of 96.12%and extremely low thermal conductivity of 0.0343 W/(m·K).The existence of walls and secondary pores contributes to reduced thermal conductivity.There is a temperature difference of over 800℃between frontside and backside of the sample under fire resistance test.The research indicates that these as-prepared high-entropy ceramic foams are expected to be promising thermal insulation materials.
文摘In aerodynamics, the laminar or turbulent regime of a boundary layer has a strong influence on friction or heat transfer. In practical applications, it is sometimes necessary to trip the transition to turbulent, and a common way is by use of a roughness element （e.g. a step） on the wall. The present paper is concerned with the numerical im- plementation of such a trip in large-eddy simulations. The study is carried out on a flat-plate boundary layer con- figuration, with Reynolds number Rex=l.3x 106. First, this work brings the opportunity to introduce a practical methodology to assess convergence in large-eddy simulations. Second, concerning the trip implementation, a volume source term is proposed and is shown to yield a smoother and faster transition than a grid step. Moreover, it is easier to implement and more adaptable. Finally, two subgrid-scale models are tested： the WALE model of Nic0ud and Ducros （Flow Turbul. Combust., vol. 62, 1999） and the shear-improved Smagorinsky model of Ldv^que et al. （J. Fluid Mech., vol. 570, 2007）. Both models allow transition, but the former appears to yield a faster transition and a better prediction of friction in the turbulent regime.
