利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色...利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。展开更多
With the increasing urgency of the carbon emission reduction task,the generation expansion planning process needs to add carbon emission risk constraints,in addition to considering the level of power adequacy.However,...With the increasing urgency of the carbon emission reduction task,the generation expansion planning process needs to add carbon emission risk constraints,in addition to considering the level of power adequacy.However,methods for quantifying and assessing carbon emissions and operational risks are lacking.It results in excessive carbon emissions and frequent load-shedding on some days,although meeting annual carbon emission reduction targets.First,in response to the above problems,carbon emission and power balance risk assessment indicators and assessment methods,were proposed to quantify electricity abundance and carbon emission risk level of power planning scenarios,considering power supply regulation and renewable energy fluctuation characteristics.Secondly,building on traditional two-tier models for low-carbon power planning,including investment decisions and operational simulations,considering carbon emissions and power balance risks in lower-tier operational simulations,a two-tier rolling model for thermal power retrofit and generation expansion planning was established.The model includes an investment tier and operation assessment tier and makes year-by-year decisions on the number of thermal power units to be retrofitted and the type and capacity of units to be commissioned.Finally,the rationality and validity of the model were verified through an example analysis,a small-scale power supply system in a certain region is taken as an example.The model can significantly reduce the number of days of carbon emissions risk and ensure that the power balance risk is within the safe limit.展开更多
Dear Editor,Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),theseventh coronavirus known to jump from intermediate hosts to humans,has resulted in a worldwide pandemic and caused immense economicdamage(Tan...Dear Editor,Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),theseventh coronavirus known to jump from intermediate hosts to humans,has resulted in a worldwide pandemic and caused immense economicdamage(Tan et al.,2020;Zhu et al.,2020).It is believed that coronavirus spillover may occur again in the future.Human exposure to a bat coro-navirus has been serologically confimed in a rural area of China,indi-cating that the coronavirus spillover occurred,although the origin andfrequency of spillovers are unclear(Wang et al.,2018).展开更多
The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electrom...The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.展开更多
Anti-phase domain defects easily form in the in-plane GaAs nanowires(NWs)grown on CMOS-compatiblegroup IV substrates,which makes it difficult to obtain GaAs NWs with a designed length and also leads to asignificant li...Anti-phase domain defects easily form in the in-plane GaAs nanowires(NWs)grown on CMOS-compatiblegroup IV substrates,which makes it difficult to obtain GaAs NWs with a designed length and also leads to asignificant limitation in the growth of high-quality in-plane GaAs NW networks on such substrates.Here,wereport on the selective area growth of anti-phase domain-free in-plane GaAs NWs and NW networks on Ge(111)substrates.Detailed structural studies confirm that the GaAs NW grown using a large pattern period and GaAsNW networks grown by adding the Sb are both high-quality pure zinc-blende single crystals free of stackingfaults,twin defects,and anti-phase domain defects.Room-temperature photoluminescence measurements show asubstantial improvement in crystal quality and good consistency and uniformity of the GaAs NW networks.Ourwork provides useful insights into the controlled growth of high-quality anti-phase domain-defects-free in-planeIII-V NWs and NW networks.展开更多
The Al-Mg_(2)Si in-situ composite is a lightweight material with great potential for application in fields such as automotive lightweighting,aerospace,and electronic components.In this research,the modification,semi-s...The Al-Mg_(2)Si in-situ composite is a lightweight material with great potential for application in fields such as automotive lightweighting,aerospace,and electronic components.In this research,the modification,semi-solid technology coupled with different types of electromagnetic stirring was applied to regulate the undesirable solidified dendritic microstructure and facilitate the composites’mechanical properties.The spheroidization and refinement of Mg_(2)Si andα-Al matrix in SM(semi-solid)+RES(rotate electromagnetic stirring)sample and SM+SHES(single winding helical electromagnetic stirring)sample are realized under the effect of fused dendrite arm,the decreased critical nucleate radius,and the increased nucleation rate and extra supercooling degree induced by electromagnetic stirring.The Mg_(2)Si phase in the SM+RES sample and SM+SHES sample is refined by 73.4%and 75.7%,respectively compared to the AC(as-cast)sample.Besides,the single winding electromagnetic stirring can lead to more homogeneously distributed physical fields,lower temperature gradient,and more significant mass transfer,mainly responsible for the more homogeneous distributed reinforced finer Mg_(2)Si particles in the SM+SHES sample.Moreover,both the tensile properties and hardness of modified semi-solid composites are improved through electromagnetic stirring.Compared with RES,the improvement effect of SHES is more excellent.The SM+SHES sample possesses the highest Brinell hardness(124.7 HB),and its quality index of tensile properties is 5.73%and 82.2%higher than that of the SM+RES and AC samples,respectively.展开更多
Along with NOR flash cell scaling down,dielectric burnout has gradually become one of the most important factors which affects product reliability,especially for high dropout voltage films.In this study,we demonstrate...Along with NOR flash cell scaling down,dielectric burnout has gradually become one of the most important factors which affects product reliability,especially for high dropout voltage films.In this study,we demonstrate a reliability-enhanced NOR flash cell in 50 nm node technology through structural optimization of floating gate(FG)dimensions and active area profile.By synergistically increasing FG thickness,reducing FG width,and tuning cell-open depth,the control gate-to-active area corner distance expands by 22%,suppressing peak electric fields by 29%vertically and 18%horizontally.This structural innovation achieves:(1)100×reduction in early-cycle burnout failures,(2)7.38×time dependent dielectric breakdown lifetime improve-ment,while maintaining data retention and accelerating programming/erasing speeds by 15.4%/7.3%.The enhanced reliability enables 97.5%reduction in Fowler−Nordheim stress time during characterization program testing,providing a cost-effective solution for automotive-grade flash memories.展开更多
Today,a well-devised charging operation scheme is urgently needed by on-site workmen and is critical for building an intelligent blast furnace(BF).Previous research on charging operations always focused on the two-dim...Today,a well-devised charging operation scheme is urgently needed by on-site workmen and is critical for building an intelligent blast furnace(BF).Previous research on charging operations always focused on the two-dimensional shape of the burden surface(i.e.,a single radial profile)while neglecting the unique feature of global dissymmetry,severely restricting the development of precise charging.For this reason,this study proposes an innovative optimization strategy for the charging operation under the three-dimensional burden surface,which is the first attempt in this field.First,a practicable region partitioning scheme is introduced,and the partitioning results are then integrated with the charging mechanism to construct a three-dimensional burden surface prediction model.Next,the intrinsic relationship between the operational parameters and charging volume is revealed based on the law of mass conservation,which forms the basis for defining a novel operational parameter with variable-speed utility,referred to as the neotype charging matrix(NCM).To find the best NCM,a customized NCM optimization strategy,involving a dual constraint handling technique in conjunction with a two-stage hybrid variable differential evolution algorithm,is further developed.The industrial experiment results manifest that the partitioning scheme significantly enhances the accuracy of burden surface description.Moreover,the NCM optimization strategy offers greater flexibility and higher accuracy than current mainstream optimization strategies for the charging matrix(CM).展开更多
文摘利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。
基金supported by Science and Technology Project of State Grid Anhui Electric Power Co.,Ltd. (No.B6120922000A).
文摘With the increasing urgency of the carbon emission reduction task,the generation expansion planning process needs to add carbon emission risk constraints,in addition to considering the level of power adequacy.However,methods for quantifying and assessing carbon emissions and operational risks are lacking.It results in excessive carbon emissions and frequent load-shedding on some days,although meeting annual carbon emission reduction targets.First,in response to the above problems,carbon emission and power balance risk assessment indicators and assessment methods,were proposed to quantify electricity abundance and carbon emission risk level of power planning scenarios,considering power supply regulation and renewable energy fluctuation characteristics.Secondly,building on traditional two-tier models for low-carbon power planning,including investment decisions and operational simulations,considering carbon emissions and power balance risks in lower-tier operational simulations,a two-tier rolling model for thermal power retrofit and generation expansion planning was established.The model includes an investment tier and operation assessment tier and makes year-by-year decisions on the number of thermal power units to be retrofitted and the type and capacity of units to be commissioned.Finally,the rationality and validity of the model were verified through an example analysis,a small-scale power supply system in a certain region is taken as an example.The model can significantly reduce the number of days of carbon emissions risk and ensure that the power balance risk is within the safe limit.
基金supported by the National Natural Science Foundation of China(82102365,92269115,32270996,82061138020)the Science and Technology Innovation Program of the Hunan Province of China(2022RC3079)+7 种基金the SC1-PHE-CORONAVIRUS-2020:Advancing Knowledge for the Clinical and Public Health Response to the 2019-nCoV Epidemic’from the European Commission(CORONADX,no.101003562,to Y-PL)Natural Science Foundation of the Hunan Province of China(2021JJ40006,2022JJ30095)Educational Commission of the Hunan Province of China(21A0529)the Clinical Medical Innovation Technology Guide Project of the Hunan Province(2021SK50304,2021SK50306 and 2021SK50312)the Scientific Research Innovation Project of Graduate of Hunan Province(CX20221024)the Scientific Research Innovation Project of Graduate of University of South China(213YXC019)approved by the Institutional Ethical Review Board of The Central Hospital of Shaoyang,Hunan Province,China(V.1.0,20200301)The First People's Hospital of Chenzhou,Hunan Province,China(V.3.0,2021001)。
文摘Dear Editor,Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),theseventh coronavirus known to jump from intermediate hosts to humans,has resulted in a worldwide pandemic and caused immense economicdamage(Tan et al.,2020;Zhu et al.,2020).It is believed that coronavirus spillover may occur again in the future.Human exposure to a bat coro-navirus has been serologically confimed in a rural area of China,indi-cating that the coronavirus spillover occurred,although the origin andfrequency of spillovers are unclear(Wang et al.,2018).
基金support for this work by Key Research and Development Project of Henan Province(Grant.No.241111232300)the National Natural Science Foundation of China(Grant.No.52273085 and 52303113)the Open Fund of Yaoshan Laboratory(Grant.No.2024003).
文摘The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.12374459,61974138,and 92065106)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0302400)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB0460000)the support from the Youth Innovation Promotion Association,Chinese Academy of Sciences(Grant Nos.2017156 and Y2021043)。
文摘Anti-phase domain defects easily form in the in-plane GaAs nanowires(NWs)grown on CMOS-compatiblegroup IV substrates,which makes it difficult to obtain GaAs NWs with a designed length and also leads to asignificant limitation in the growth of high-quality in-plane GaAs NW networks on such substrates.Here,wereport on the selective area growth of anti-phase domain-free in-plane GaAs NWs and NW networks on Ge(111)substrates.Detailed structural studies confirm that the GaAs NW grown using a large pattern period and GaAsNW networks grown by adding the Sb are both high-quality pure zinc-blende single crystals free of stackingfaults,twin defects,and anti-phase domain defects.Room-temperature photoluminescence measurements show asubstantial improvement in crystal quality and good consistency and uniformity of the GaAs NW networks.Ourwork provides useful insights into the controlled growth of high-quality anti-phase domain-defects-free in-planeIII-V NWs and NW networks.
基金supported by the National Key R&D Projects(No.2021YFB3702000)the Institute Projects of Ansteel Beijing Research Institute(No.2023BJC-06)the Regional Company Projects in Ansteel Beijing Research Institute(No.2022BJB-18BG&No.2022BJB-13GF).
文摘The Al-Mg_(2)Si in-situ composite is a lightweight material with great potential for application in fields such as automotive lightweighting,aerospace,and electronic components.In this research,the modification,semi-solid technology coupled with different types of electromagnetic stirring was applied to regulate the undesirable solidified dendritic microstructure and facilitate the composites’mechanical properties.The spheroidization and refinement of Mg_(2)Si andα-Al matrix in SM(semi-solid)+RES(rotate electromagnetic stirring)sample and SM+SHES(single winding helical electromagnetic stirring)sample are realized under the effect of fused dendrite arm,the decreased critical nucleate radius,and the increased nucleation rate and extra supercooling degree induced by electromagnetic stirring.The Mg_(2)Si phase in the SM+RES sample and SM+SHES sample is refined by 73.4%and 75.7%,respectively compared to the AC(as-cast)sample.Besides,the single winding electromagnetic stirring can lead to more homogeneously distributed physical fields,lower temperature gradient,and more significant mass transfer,mainly responsible for the more homogeneous distributed reinforced finer Mg_(2)Si particles in the SM+SHES sample.Moreover,both the tensile properties and hardness of modified semi-solid composites are improved through electromagnetic stirring.Compared with RES,the improvement effect of SHES is more excellent.The SM+SHES sample possesses the highest Brinell hardness(124.7 HB),and its quality index of tensile properties is 5.73%and 82.2%higher than that of the SM+RES and AC samples,respectively.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.HUST:5003190012)the Natural Science Foundation of Hubei Province(Grant No.2024AFA043).
文摘Along with NOR flash cell scaling down,dielectric burnout has gradually become one of the most important factors which affects product reliability,especially for high dropout voltage films.In this study,we demonstrate a reliability-enhanced NOR flash cell in 50 nm node technology through structural optimization of floating gate(FG)dimensions and active area profile.By synergistically increasing FG thickness,reducing FG width,and tuning cell-open depth,the control gate-to-active area corner distance expands by 22%,suppressing peak electric fields by 29%vertically and 18%horizontally.This structural innovation achieves:(1)100×reduction in early-cycle burnout failures,(2)7.38×time dependent dielectric breakdown lifetime improve-ment,while maintaining data retention and accelerating programming/erasing speeds by 15.4%/7.3%.The enhanced reliability enables 97.5%reduction in Fowler−Nordheim stress time during characterization program testing,providing a cost-effective solution for automotive-grade flash memories.
基金supported in part by the Science and Technology Innovation Program of Hunan Province(2024RC1007)the Young Scientists Fund of the National Natural Science Foundation of China(62303491)+2 种基金the Major Program of Xiangjiang Laboratory(22XJ01005)the Young Scientists Fund of the National Natural Science Foundation of China(62203473)Central South University Post-Graduate Independent Exploration and Innovation Project(2024ZZTS0451).
文摘Today,a well-devised charging operation scheme is urgently needed by on-site workmen and is critical for building an intelligent blast furnace(BF).Previous research on charging operations always focused on the two-dimensional shape of the burden surface(i.e.,a single radial profile)while neglecting the unique feature of global dissymmetry,severely restricting the development of precise charging.For this reason,this study proposes an innovative optimization strategy for the charging operation under the three-dimensional burden surface,which is the first attempt in this field.First,a practicable region partitioning scheme is introduced,and the partitioning results are then integrated with the charging mechanism to construct a three-dimensional burden surface prediction model.Next,the intrinsic relationship between the operational parameters and charging volume is revealed based on the law of mass conservation,which forms the basis for defining a novel operational parameter with variable-speed utility,referred to as the neotype charging matrix(NCM).To find the best NCM,a customized NCM optimization strategy,involving a dual constraint handling technique in conjunction with a two-stage hybrid variable differential evolution algorithm,is further developed.The industrial experiment results manifest that the partitioning scheme significantly enhances the accuracy of burden surface description.Moreover,the NCM optimization strategy offers greater flexibility and higher accuracy than current mainstream optimization strategies for the charging matrix(CM).
