期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
非均相反应制备再生纤维素接枝聚乳酸共聚物 被引量:3
1
作者 唐越 侯德发 +1 位作者 谭黄 杨鸣波 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2020年第6期130-135,144,共7页
通过以再生纤维素(RC)为前驱体,在非均相条件下制备了再生纤维素接枝聚乳酸共聚物(RC-g-PLA),并优化了非均相反应的工艺条件;通过傅里叶变换红外光谱、核磁共振、X射线衍射等对RC-g-PLA进行了表征。结果表明,乳酸(LA)洗涤次数为1次,催... 通过以再生纤维素(RC)为前驱体,在非均相条件下制备了再生纤维素接枝聚乳酸共聚物(RC-g-PLA),并优化了非均相反应的工艺条件;通过傅里叶变换红外光谱、核磁共振、X射线衍射等对RC-g-PLA进行了表征。结果表明,乳酸(LA)洗涤次数为1次,催化剂用量为LA质量的3‰,预混时长为24 h时,非均相化学反应效果最佳,所得RC-g-PLA为非晶聚合物,其取代度为1.36,PLA侧链的聚合度为2.55,并且该RC-g-PLA能够均匀地溶解于二甲基亚砜中。 展开更多
关键词 再生纤维素 聚乳酸 非均相反应 非晶聚合物 溶解
在线阅读 下载PDF
高氯酸锂增容聚乳酸/聚碳酸亚丙基酯共混体系
2
作者 王凯 张凯 +2 位作者 侯德发 刘磊 杨鸣波 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2021年第8期76-82,共7页
采用高氯酸锂为聚乳酸(PLA)/聚碳酸亚丙基酯(PPC)共混材料的增容剂,通过研究高氯酸锂对PLA/PPC共混体系相容性、热性能及力学性能的影响发现,高氯酸锂的加入能有效改善PLA与PPC之间的相界面,显著缩短体系的半结晶时间(最高达538.7%),使... 采用高氯酸锂为聚乳酸(PLA)/聚碳酸亚丙基酯(PPC)共混材料的增容剂,通过研究高氯酸锂对PLA/PPC共混体系相容性、热性能及力学性能的影响发现,高氯酸锂的加入能有效改善PLA与PPC之间的相界面,显著缩短体系的半结晶时间(最高达538.7%),使材料的断裂伸长率提高了235%。同时,通过调节高氯酸锂与PPC的共混顺序,并结合傅里叶红外光谱探究分析了高氯酸锂对PLA/PPC共混体系的增容机理,发现高氯酸锂通过对PPC的络合作用及PLA的电荷作用增强PLA与PPC之间作用力。 展开更多
关键词 聚乳酸 聚碳酸亚丙酯 熔融共混 相容性 韧性
在线阅读 下载PDF
Preparation of Film Based on Polyvinyl Alcohol Modified by Alkaline Starch and Lignin Fiber
3
作者 Yunxia Zhou Hisham Essawy +5 位作者 Ai Liu Chenyu Yang defa hou Xiaojian Zhou Guanben Du Jun Zhang 《Journal of Renewable Materials》 SCIE EI 2023年第2期837-852,共16页
This study presents an easily prepared film based on alkaline starch-polyvinyl alcohol hybrid and lignin fiber as an additive(SPL film).The SPL film was prepared under acidic conditions through a polycondensation reac... This study presents an easily prepared film based on alkaline starch-polyvinyl alcohol hybrid and lignin fiber as an additive(SPL film).The SPL film was prepared under acidic conditions through a polycondensation reaction of PVA and a mixture incorporating alkaline starch and lignin fiber from agriculture or forest source.The examination using scanning electron microscopy(SEM)showed that the surface of SPL film was smooth and the lignin fiber had good compatibility within the film hybrid.Electrospray ionization mass spectroscopy(ESI-MS)and fourier transform infrared(FTIR)investigations indicated that alkaline starch and lignin fiber reacted with PVA under acidic conditions and that–CH_(2)–O–groups were involved in the cross-linking of the SPL system.In addition,the SPL film exhibited only 4%light transmittance,which effectively reduces the ultraviolet and visible light(UV-Vis)penetration,along with good performance when exposed to thermal degradation,in which the mass loss reached around 60%at 400℃.More-over,the SPL film acquired excellent tensile strength,which is much higher than that of PVA-lignin(PL)composite film. 展开更多
关键词 Bio-based film STARCH lignin fiber polyvinyl alcohol tensile strength
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部