The microstructural features of high-temperature sintered and CaO-MgO-Al_2O_3-SiO_2(CMAS) corroded air plasma sprayed Y_2O_3 stabilized ZrO_2(YSZ) thermal barrier coatings(TBCs) under the thermal gradient condition we...The microstructural features of high-temperature sintered and CaO-MgO-Al_2O_3-SiO_2(CMAS) corroded air plasma sprayed Y_2O_3 stabilized ZrO_2(YSZ) thermal barrier coatings(TBCs) under the thermal gradient condition were comparatively studied. As-sprayed YSZ has a lamellar structure and the lamellae are composed of closely aligned columnar crystals. The sintered and the CMAS corroded YSZ coatings maintain the t'-ZrO_2 phase as the as-sprayed YSZ coating. The sintered YSZ remains the lamellar structure with reduced interlamellar gaps and grains coarsening. After the CMAS corrosion, the top layer of the YSZ coating keeps its lamellar structure consisting of some columnar grains with the CMAS infiltration into the intergrain gaps and the formation of striped Zr_2Y_2 O_7. The typical lamellar structure transforms into more equiaxed grains in the middle and bottom layers of the ceramic coating along with significant infiltration of amorphous CMAS and anorthite formation in the bottom layer owing to the high contents of Ca and Al.展开更多
In this paper, a modified direct product method of scattering matrix （DPSM） was presented and the cal- culation formulawas derived as follows： φ（z）=∑n1/n!（Mz）nφ（O）and φ（z＋εj）=∑n1/n!（Mεj）nφ（z）,...In this paper, a modified direct product method of scattering matrix （DPSM） was presented and the cal- culation formulawas derived as follows： φ（z）=∑n1/n!（Mz）nφ（O）and φ（z＋εj）=∑n1/n!（Mεj）nφ（z）,whereM is the scattering matrix of which the dimension can be reduced by ＇Bethe potential method＇ drastically and therefore the calculation speed can be increased tremendously without losing accuracy very much. The results calculated with the DPSM method are in almost exact agreement with those calculated with BW method. However, the calculation speed for the modified DPSM method is approximately three times faster than that for the BW method. Furthermore, the DPSM is suitable for computing all types of ma- trices without requiring symmetry or conjugate symmetry.展开更多
Based on the electron dynamic diffraction, phase shift of the exit wave function vs misorientation of the incident electron beam from the exact zone axis has been calculated for the [001] oriented copper. The result s...Based on the electron dynamic diffraction, phase shift of the exit wave function vs misorientation of the incident electron beam from the exact zone axis has been calculated for the [001] oriented copper. The result shows that the peak of phase shift is the maximum at the atom position as the electron beam along the exact [001] zone axis, and the peak value of phase shift decreases as increases of the misorientation. At small misorientation, i.e. less than 5 degree, change of the phase shift is minimal. The peak value of phase shift decreases significantly when the incident beam deviates form the zone axis over 10 degree and the exit wave has a planar configuration as the misoriention angle arrives -17 degree. The effect of this phase shift characteristics on the information extracted from the hologram has also been considered.展开更多
基金supported financially by the National Natural Science Foundation of China (Nos. 51590891 and 11772288)the opening project of State Key Laboratory of Explosion Science and Technology (Beijing Institute of Technology, the opening project No. KFJJ15-05M)"Hundred Talents Program" of Hunan Province, China
文摘The microstructural features of high-temperature sintered and CaO-MgO-Al_2O_3-SiO_2(CMAS) corroded air plasma sprayed Y_2O_3 stabilized ZrO_2(YSZ) thermal barrier coatings(TBCs) under the thermal gradient condition were comparatively studied. As-sprayed YSZ has a lamellar structure and the lamellae are composed of closely aligned columnar crystals. The sintered and the CMAS corroded YSZ coatings maintain the t'-ZrO_2 phase as the as-sprayed YSZ coating. The sintered YSZ remains the lamellar structure with reduced interlamellar gaps and grains coarsening. After the CMAS corrosion, the top layer of the YSZ coating keeps its lamellar structure consisting of some columnar grains with the CMAS infiltration into the intergrain gaps and the formation of striped Zr_2Y_2 O_7. The typical lamellar structure transforms into more equiaxed grains in the middle and bottom layers of the ceramic coating along with significant infiltration of amorphous CMAS and anorthite formation in the bottom layer owing to the high contents of Ca and Al.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11274263 and 11274264)
文摘In this paper, a modified direct product method of scattering matrix （DPSM） was presented and the cal- culation formulawas derived as follows： φ（z）=∑n1/n!（Mz）nφ（O）and φ（z＋εj）=∑n1/n!（Mεj）nφ（z）,whereM is the scattering matrix of which the dimension can be reduced by ＇Bethe potential method＇ drastically and therefore the calculation speed can be increased tremendously without losing accuracy very much. The results calculated with the DPSM method are in almost exact agreement with those calculated with BW method. However, the calculation speed for the modified DPSM method is approximately three times faster than that for the BW method. Furthermore, the DPSM is suitable for computing all types of ma- trices without requiring symmetry or conjugate symmetry.
基金financially supported tional Natural Science Foundation of China No. 60271028.
文摘Based on the electron dynamic diffraction, phase shift of the exit wave function vs misorientation of the incident electron beam from the exact zone axis has been calculated for the [001] oriented copper. The result shows that the peak of phase shift is the maximum at the atom position as the electron beam along the exact [001] zone axis, and the peak value of phase shift decreases as increases of the misorientation. At small misorientation, i.e. less than 5 degree, change of the phase shift is minimal. The peak value of phase shift decreases significantly when the incident beam deviates form the zone axis over 10 degree and the exit wave has a planar configuration as the misoriention angle arrives -17 degree. The effect of this phase shift characteristics on the information extracted from the hologram has also been considered.
