We aimed to reuse the propylene oxide sludge(POS).Propylene oxide sludge shell-aggregate(POSS-A)and propylene oxide sludge gradient shell-aggregate(POSGS-A)whose main hydrated phase is tobermorite were successfully ma...We aimed to reuse the propylene oxide sludge(POS).Propylene oxide sludge shell-aggregate(POSS-A)and propylene oxide sludge gradient shell-aggregate(POSGS-A)whose main hydrated phase is tobermorite were successfully manufactured by the hydrothermal synthesis of POS and silica materials under the condition of autoclaved(180℃,1.0 MPa)curing.Influences of pre-wetting time of coarse aggregate and pressure application mode on the different concretes were investigated.The experimental results show that the concrete with POSS-A as coarse aggregate(POSS-A concrete),the concrete with POS gradient shell-aggregate as coarse aggregate(POSGS-A concrete),sintered aggregate concrete and common concrete,all have excellent impermeability performance whatever the pre-wetting time of coarse aggregate is 0.5 h or 24 h,and the pre-wetting time of coarse aggregate has a negligible influence on the concrete.The influence degree of pressure application mode on the impermeability performance of the sintered aggregate concrete is the greatest among three kinds of concrete,which has a negligible influence on impermeability performance of the other concretes.POSGS-A can be used as a green building light aggregate in hydraulic concrete.展开更多
The Fe-based amorphous alloy coatings with different porosities were deposited on Q235 steel substrates by means of atmospheric plasma spraying(APS).The as-sprayed coatings were remelted by the facility of a Nd:YAG la...The Fe-based amorphous alloy coatings with different porosities were deposited on Q235 steel substrates by means of atmospheric plasma spraying(APS).The as-sprayed coatings were remelted by the facility of a Nd:YAG laser to further enhance their compactness and bonding strength via orthogonal experiment design.The effects of laser remelting on the microstructure,phase compositions and mechanical properties of the as-sprayed coatings were investigated by optical microscopy,scanning electron microscope,X-ray diffraction and Vickers microhardness tester.The corrosion performance of the coatings was evaluated by both potential dynamic measurements(PDM)and electrochemical impedance spectroscopy(EIS)in a 10%NaOH solution.The results indicate that laser power of 700 W,scanning velocity of 4 mm/s,beam size of 3 mm and porosity of 1.19%are the optimized remelting process parameters.The laser-remelted coatings exhibite more homogenous structure as strong metallurgical bonding to substrates.The amorphous phases in the as-sprayed coatings crystallize toα-Fe,Fe2Si,Fe3.5B,and Fe2W phases for the high temperature and rapid solidification in the remelting process.The microhardness values of as-sprayed are in the range of 700-800 HV0.1,while the microhardness values of the remelted coatings are enhanced slightly to 750-850 HV0.1.Both PDM and EIS analysis results show that the remelted coatings exhibite relatively excellent corrosion resistance compared with the stainless steel 1Cr18Ni9Ti,however the corrosion resistance of the remelted coatings is inferior to the as-sprayed amorphous coatings.展开更多
基金Funded by the National Nature Science Foundation of China(Nos.51468053,51772153,11662015,and 51769026)。
文摘We aimed to reuse the propylene oxide sludge(POS).Propylene oxide sludge shell-aggregate(POSS-A)and propylene oxide sludge gradient shell-aggregate(POSGS-A)whose main hydrated phase is tobermorite were successfully manufactured by the hydrothermal synthesis of POS and silica materials under the condition of autoclaved(180℃,1.0 MPa)curing.Influences of pre-wetting time of coarse aggregate and pressure application mode on the different concretes were investigated.The experimental results show that the concrete with POSS-A as coarse aggregate(POSS-A concrete),the concrete with POS gradient shell-aggregate as coarse aggregate(POSGS-A concrete),sintered aggregate concrete and common concrete,all have excellent impermeability performance whatever the pre-wetting time of coarse aggregate is 0.5 h or 24 h,and the pre-wetting time of coarse aggregate has a negligible influence on the concrete.The influence degree of pressure application mode on the impermeability performance of the sintered aggregate concrete is the greatest among three kinds of concrete,which has a negligible influence on impermeability performance of the other concretes.POSGS-A can be used as a green building light aggregate in hydraulic concrete.
基金National Natural Science Foundation of China(50805104)
文摘The Fe-based amorphous alloy coatings with different porosities were deposited on Q235 steel substrates by means of atmospheric plasma spraying(APS).The as-sprayed coatings were remelted by the facility of a Nd:YAG laser to further enhance their compactness and bonding strength via orthogonal experiment design.The effects of laser remelting on the microstructure,phase compositions and mechanical properties of the as-sprayed coatings were investigated by optical microscopy,scanning electron microscope,X-ray diffraction and Vickers microhardness tester.The corrosion performance of the coatings was evaluated by both potential dynamic measurements(PDM)and electrochemical impedance spectroscopy(EIS)in a 10%NaOH solution.The results indicate that laser power of 700 W,scanning velocity of 4 mm/s,beam size of 3 mm and porosity of 1.19%are the optimized remelting process parameters.The laser-remelted coatings exhibite more homogenous structure as strong metallurgical bonding to substrates.The amorphous phases in the as-sprayed coatings crystallize toα-Fe,Fe2Si,Fe3.5B,and Fe2W phases for the high temperature and rapid solidification in the remelting process.The microhardness values of as-sprayed are in the range of 700-800 HV0.1,while the microhardness values of the remelted coatings are enhanced slightly to 750-850 HV0.1.Both PDM and EIS analysis results show that the remelted coatings exhibite relatively excellent corrosion resistance compared with the stainless steel 1Cr18Ni9Ti,however the corrosion resistance of the remelted coatings is inferior to the as-sprayed amorphous coatings.
