期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
不同矿物掺料对硫氧镁水泥耐热性能的影响 被引量:9
1
作者 崔宝栋 关岩 +4 位作者 毕万利 滕笑语 梁媛媛 陈英 孟宪章 《硅酸盐通报》 CAS 北大核心 2020年第2期428-434,共7页
通过在硫氧镁水泥(MOS)净浆中加入复合外加剂及不同混合材料,分析了不同温度下对MOS热膨胀率、线变化、烧失量以及烧后力学性能的影响。利用X射线衍射仪、扫描电镜及同步热分析仪对试样进行检测,并分析了受热前后试样矿物组成、微观形... 通过在硫氧镁水泥(MOS)净浆中加入复合外加剂及不同混合材料,分析了不同温度下对MOS热膨胀率、线变化、烧失量以及烧后力学性能的影响。利用X射线衍射仪、扫描电镜及同步热分析仪对试样进行检测,并分析了受热前后试样矿物组成、微观形貌的变化,阐述了受热过程中发生的理化反应等。结果表明,引入复合外加剂、粉煤灰或硅灰均可在一定程度上提高MOS受热后的强度,为硫氧镁水泥在高温领域的应用提供了理论基础。其中引入1.3%复合外加剂的试样500℃烧后强度最高,达到45.3 MPa,较净浆提高了55.8%,引入20%硅灰的试样受热后呈现先收缩后膨胀的现象,500℃烧后强度达到38.5 MPa,较净浆强度提高了35%。实验结果表明,硫氧镁水泥的最高使用温度为800℃。 展开更多
关键词 硫氧镁水泥 耐热性能 矿物掺料 微观形貌
在线阅读 下载PDF
硫氧镁泡沫水泥吸波材料的制备及性能 被引量:2
2
作者 崔宝栋 刘军 +2 位作者 李思琪 李瑶 邓永刚 《建筑材料学报》 EI CAS CSCD 北大核心 2024年第4期291-298,共8页
采用具有优良吸波性能的铁氧体和碳化硅来改性硫氧镁水泥泡沫板,研究了铁氧体和碳化硅掺量对改性硫氧镁水泥吸波性能的影响,并通过X射线衍射及扫描电子显微镜分析了其影响机理.结果表明:在3.95~18.00 GHz目标频段下,掺加5%碳化硅改性硫... 采用具有优良吸波性能的铁氧体和碳化硅来改性硫氧镁水泥泡沫板,研究了铁氧体和碳化硅掺量对改性硫氧镁水泥吸波性能的影响,并通过X射线衍射及扫描电子显微镜分析了其影响机理.结果表明:在3.95~18.00 GHz目标频段下,掺加5%碳化硅改性硫氧镁水泥的最低反射率出现在8.40 GHz处,为-15.9 dB;掺加15%铁氧体改性硫氧镁水泥的最低反射率出现在7.04 GHz处,为-17.3 dB;铁氧体和碳化硅按照一定比例掺加到硫氧镁水泥基体中,均表现出良好的吸波性能. 展开更多
关键词 硫氧镁水泥 碳化硅 铁氧体 吸波性能
在线阅读 下载PDF
石墨改性硫氧镁水泥复合材料的吸波性能 被引量:1
3
作者 崔宝栋 刘军 +1 位作者 李瑶 杨元全 《材料科学与工程学报》 CAS CSCD 北大核心 2023年第3期522-526,共5页
在硫氧镁水泥的基础上,掺入石墨改性。本实验研究了0%~25%石墨掺入量对改性后硫氧镁水泥的抗压强度、抗折强度、物相结构和吸波性能。结果表明:掺入对应氧化镁含量10%石墨的硫氧镁水泥基抗折强度最高,在28 d保持在12.2 MPa,与此同时抗... 在硫氧镁水泥的基础上,掺入石墨改性。本实验研究了0%~25%石墨掺入量对改性后硫氧镁水泥的抗压强度、抗折强度、物相结构和吸波性能。结果表明:掺入对应氧化镁含量10%石墨的硫氧镁水泥基抗折强度最高,在28 d保持在12.2 MPa,与此同时抗压强度为53.4 MPa,且吸波性能达到最佳,在16.3 GHz处反射率峰值达到-24 dB,在12~18 GHz波段下,整体反射率均小于-7 dB,其中反射率在-10 dB的有效吸收带宽占整体测量范围的73%。 展开更多
关键词 硫氧镁水泥 石墨 吸波性能 517相
在线阅读 下载PDF
Non-isothermal Kinetic Analysis on the Thermal Decomposition of the Phase 517 from Hydration Product of Magnesium Sulfide Cement 被引量:3
4
作者 cui baodong GUAN Yan BI Wanli 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2023年第2期374-380,共7页
In order to better understand the thermodynamic properties of magnesium oxysulfate(MOS)cement,pure reagent was analyzed to prepare magnesium sulfide cement,non-isothermal kinetics calculation of the main hydration pro... In order to better understand the thermodynamic properties of magnesium oxysulfate(MOS)cement,pure reagent was analyzed to prepare magnesium sulfide cement,non-isothermal kinetics calculation of the main hydration products was also carried out,and the conversion process of magnesium sulfide cement 517 phase at different temperatures was investigated.Composition of magnesium sulfide cement prepared was measured by XRD technique,and decomposed by a comprehensive thermal analyzer,and DSC curves of magnesium sulfide cement under different temperature rising rates were processed by Kinssinger method and Dolye-Ozawa method.According to the TG-DSC curves of magnesium sulfide cement,the thermal decomposition reaction process can be divided into five stages under normal conditions.The DSC curve was processed by Kinssinger method and Dolye-Ozawa method,and the kinetic analysis was carried out to calculate the 517 phase activation energy of magnesium sulfide cement.The three stages correspond to different activation energies.Therefore,flame retardant mechanism and thermal decomposition mechanism of magnesium sulfide cement based materials are deduced. 展开更多
关键词 magnesium sulfide cement comprehensive thermal analysis nonisothermal dynamics 517 phase
原文传递
Preparation and Properties of Magnesium Oxysulfide Cement Based Foam Board Absorbing Material 被引量:1
5
作者 刘军 崔宝栋 庞博 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS CSCD 2024年第1期118-125,共8页
In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium... In order to better solve the problem of electromagnetic pollution in the civil building cement,to improve the absorption capacity of magnesium oxysulfide cement based materials,and to better use sulfur oxide magnesium cement foamed sheet for improvement of electromagnetic industry,this paper uses the excellent microwave absorbing properties of ferrite and the modified sulfur oxide magnesium cement foam board,and discusses the microwave absorbing performance,aiming at improving the electromagnetic pollution in daily life.The effects of ferrite and silicon carbide doping on microwave absorption properties of modified magnesium oxysulfate cement were studied.At the same time,the wave absorbing properties of the corresponding samples were detected by bow method,and the causes of the corresponding phenomena were analyzed by scanning electron microscopy (SEM).The results show that the lowest reflectance of the material is-17.9 dB at 34.1 GHz and the average reflectance of the whole band is-15.9 dB under the target frequency band of 26.5-40 GHz.Under the action of external magnetic field,the absorbing particles are affected by magnetization force,magnetic dipole and resistance coupling,and play the absorbing effect in the cement base solidified completely in the electromagnetic field environment.The lowest reflectance is-17.3dB at 36.4GHz and the average reflectance is-14.3dB for the whole band. 展开更多
关键词 magnesium oxysulfide cement silicon carbide FERRITE absorption properties
原文传递
“学科引领、科教融合、校企协同”制药工程专业新工科“三环育人”模式探索与实践 被引量:12
6
作者 崔宝东 韩文勇 陈永正 《卫生职业教育》 2024年第7期4-9,共6页
合肥医科大学制药工程专业经过多年建设探索与实践,坚持教学科研资源共建共享、课程体系与课程知识交叉融合、学校企业共同参与专业建设的总思路,初步构建“三环育人”模式,在制药工程专业新工科人才培养方面的示范辐射效应显著。
关键词 制药工程专业 学科引领 科教融合 校企协同
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部