DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the in...DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the increase of DCLR-P content,the yield of MCMBs increased from 47.8% to 56.8%.At the same time,the particle sizes distribution of MCMBs was narrowed,resulting in the decrease of D9o/D10 ratio from 154.88 to 6.53.The results showed that DCLR-P had a positive effect on the preparation of MCMBs.1H-NMR,FTIR,SEM and XRD were used to analyze the mechanisms and characteristics of MCMBs prepared by co-carbonization of CTP and DCLR-P.The results showed that the Proton Donor Quality Index (PDQI) of DCLR-P was 13.32,significantly higher than that of CTP (0.83).This indicated that DCLR-P had more naphthenic structure than CTP,which leads to hydrogen transferring in polycondensation reaction.The aliphatic structure of DCLR-P can improve the solubility and fusibility of mesophase,thereby making the structure of MCMBs more structured.The microstructure of the graphitized MCMBs had a substantially parallel carbon layer useful for its electrical performance.The performance of graphitized MCMBs as a negative electrode material for Li-ion batteries was tested.The particle sizes,tap density,specific surface area and initial charge-discharge efficiency of graphitized MCMBs met the requirements of CMB-I in GB/T-24533-2009.However,the initial discharge capacity of graphitized MCMB was only 296.3 mA h g-1 due to the low degree of graphitization of MCMBs.展开更多
Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oi...Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry （FCC） generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar （CT） will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent （CT） is stronger than that in non-polar solvent （FCC）. The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.展开更多
基金Supported by National Key Research and Development Program of China(2018YFB0604601)and the Technology Innovation Fund of China coal research institute(2016CX01).
文摘DCLR-P was prepared by direct coal liquefaction residue (DCLR) with ash removal.In the present experiments,mesocarbon microbeads (MCMBs) were prepared by co-carbonization of coal tar pitch (CTP) and DCLR-P.With the increase of DCLR-P content,the yield of MCMBs increased from 47.8% to 56.8%.At the same time,the particle sizes distribution of MCMBs was narrowed,resulting in the decrease of D9o/D10 ratio from 154.88 to 6.53.The results showed that DCLR-P had a positive effect on the preparation of MCMBs.1H-NMR,FTIR,SEM and XRD were used to analyze the mechanisms and characteristics of MCMBs prepared by co-carbonization of CTP and DCLR-P.The results showed that the Proton Donor Quality Index (PDQI) of DCLR-P was 13.32,significantly higher than that of CTP (0.83).This indicated that DCLR-P had more naphthenic structure than CTP,which leads to hydrogen transferring in polycondensation reaction.The aliphatic structure of DCLR-P can improve the solubility and fusibility of mesophase,thereby making the structure of MCMBs more structured.The microstructure of the graphitized MCMBs had a substantially parallel carbon layer useful for its electrical performance.The performance of graphitized MCMBs as a negative electrode material for Li-ion batteries was tested.The particle sizes,tap density,specific surface area and initial charge-discharge efficiency of graphitized MCMBs met the requirements of CMB-I in GB/T-24533-2009.However,the initial discharge capacity of graphitized MCMB was only 296.3 mA h g-1 due to the low degree of graphitization of MCMBs.
文摘Using the self-developed viscosity measuring device, the viscosity variations of coal-oil slurries with temperature increasing during coal-oil co-processing were studied. The results show that the viscosity of coal-oil slurries prepared by different kinds of oil varies differently during heating. The viscosity of the coal-oil slurry prepared by the catalytic cracking slurry （FCC） generally decreases during heating. However, the viscosity of the coal-oil slurry prepared by the high-temperature coal tar （CT） will peak at 338 ℃ during heating. The differences in viscosity variations of coal-oil slurries are analyzed. In addition to the temperature, the properties of the solvents and coal are the main influencing factors. Because the used coal contains a large number of polar functional groups, the swelling behavior of the coal in polar solvent （CT） is stronger than that in non-polar solvent （FCC）. The swelling effect of the coal can result in the appearance of the viscosity peak. Therefore, before 100 ~C, the solvent molecules entering into the coal pores is the main influencing factor of coal-oil slurries viscosity variations. After 100 ℃, the increasing of particle size of coal particles is the main influencing factor of coal-oil slurries viscosity variations.
