摘要
研究导电聚苯胺作为海水电池正极性能,通过与镁合金负极组成电池进行电性能实验,并与Mg/氯化银电池进行性能比较。结果表明导电聚苯胺作为海水电池正极具有较好的放电性能,其工作电压可达到1.2~1.35 V;导电聚苯胺自身的导电性使其在激活初始时期能在短时间内耐受较大电流;增加导电添加剂和减薄电极厚度后可增加Mg/导电聚苯胺电池的电压稳定时间;导电聚苯胺与聚四氟乙烯溶液（5%wt）比例在3.7：1~4：1时有利于正极成型。
The performance of conducting polyamide for the seawater batteries cathode is studied. A battery performance experiments with magnesium alloy anode, and compares with Mg/silver chloride batteries. The results show that the conducting polyamide for the seawater batteries cathode has a good discharging performance. The working voltage is high upto of 1.2 ~ 1.35 tl. The conductivity of conducting polyamide itself in the activation of the initial period can tolerate larger electric current in a short time. Voltage stability time of Mg/conductingpolyamide battery can be increased by incredsing the conductive agent additives and thinning thickness. The ratio between conducting polyamide to teflon solution （5% wt） ratio is 3.7：1 - 4：1 is good for the cathode shaped.
出处
《船电技术》
2015年第10期34-36,共3页
Marine Electric & Electronic Engineering
关键词
导电聚苯胺
镁合金
氯化银
放电性能
成型
conducting polyamide
magnesium alloy
silver chloride
discharge performance
shaped
