期刊文献+

苯乙烯-马来酸酐共聚物固化氰酸酯改性环氧体系反应动力学研究 被引量:1

The Kinetics of Reaction of Epoxy Resin Modified with Cyanate Ester Resin Cured by Styrene-Maleic Anhydride Copolymer(SMA)
在线阅读 下载PDF
导出
摘要 采用非等温差示扫描量热法(DSC)研究了氰酸酯/环氧树脂/苯乙烯-马来酸酐共聚物(CE/EP/SMA)三元体系的固化反应动力学。通过线性回归分析得到了不同升温速率下,固化反应的凝胶化温度(Ti)、固化温度(Tp)和后处理温度(Tt)。根据Kissinger方法,求得表观活化能为63.71 kJ/mol;根据Flynn-Wall-Oza-wa法,得到反应表观活化能为68.07 kJ/mol;根据Crane方程,得到反应级数为0.89,确定其固化反应动力学方程为-da/dt=K(1-α)0.89。 The curing kinetics of cyanate ester resin/epoxy resin cured by styrene-maleic anhydride copolymer(SMA) was studied by differential scanning calorimetry(DSC).The kinetic parameters of curing reaction were got based on the Kissinger Equation,Crane Equation and Flynn-Wall-Ozawa Equation;The apparent activation energy is 63.71 kJ/mol in the Kissinger Equation and 68.07 kJ/mol in the Ozawa method.The reaction order is 0.89 according to the Crane theory.The gelling temperature of curing reaction(Ti),the peak temperature of exotherm(Tp) and the temperature at the end of curing exotherm(Tt) at different heating rates were also obtained by using linear regression analysis and based on the data of DSC curves.
出处 《绝缘材料》 CAS 北大核心 2009年第6期47-50,共4页 Insulating Materials
基金 粤港关键领域重点突破项目(2008A011800001) 国家科技部支撑计划(2007BAE46B01)
关键词 苯乙烯-马来酸酐共聚物(SMA) 固化动力学 氰酸酯 覆铜板(CCL) styrene-maleic anhydride copolymer(SMA) curing kinetics cyanate ester copper clad laminate(CCL)
  • 相关文献

参考文献5

二级参考文献35

共引文献52

同被引文献9

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部