期刊文献+

FCC汽油降烯烃助剂的研究

Study on the Additives for FCC Gasoline Olefins Reducing
在线阅读 下载PDF
导出
摘要 采用溶胶凝胶法制备镁铝铌助剂,在600℃焙烧后添加到FCC平衡剂中,在小型固定流化床反应装置上考察其降低汽油烯烃的效果。实验表明,助剂中镁铝配比为1:1的效果最好;添加铌元素后助剂的降烯烃活性增强,含铌2%的助剂降烯烃活性较镁铝助剂增强40%。对助剂的工艺条件进行了考察,得出助剂降烯烃的最佳工艺条件为:空速14.0h-1,反应温度400℃。 The additives with different ratio of Mg/Al/Nb were prepared by sol-gel, and mixed with fluid catalytic cracking catalyst after calcinated at 600℃. Their olefins-reducing effects in FCC gasoline were studied in micro reactor. Results showed that the best ratio of Mg and Al for reaction activity is 1∶1. The conversion of olefins increased 40% by adding 2% niobium. The reaction conditions were also tested and the result showed that the better reaction temperature is at 400℃ with space velocity of 14.0 h-1.
出处 《石油与天然气化工》 CAS CSCD 北大核心 2007年第1期24-27,共4页 Chemical engineering of oil & gas
关键词 流化催化裂化 降烯烃 助剂 溶胶凝胶 FCC,olefins reducing, additive, sol-gel
  • 相关文献

参考文献13

  • 1张玉海,郭海燕,翟根林,黄常青.应用直馏汽油改质技术实现汽油质量升级[J].江苏化工,2005,33(2):51-53. 被引量:3
  • 2王龙廷,王国良,魏小波等.降低FCC汽油烯烃含量的LAP助剂的工业应用[A].2001年催化裂化协会组第八届论文年会报告论文选集[C].2001:328~332.
  • 3韩海波,刘丹禾,王龙廷等.第二代降低催化裂化汽油烯烃助剂LAP-2的研制[A].2003年催化裂化协会组第九届论文年会报告论文选集[C].2003:368~372.
  • 4候典国,张久顺.降低FCC汽油烯烃助剂LGO—A的工业应用[A].2001年催化裂化协会组第八届论文年会报告论文选集[C].2001:333~337.
  • 5周惠娟,梅建国.FCC汽油降烯烃技术进展[J].当代石油石化,2002,10(5):33-37. 被引量:22
  • 6Demmel;Edward J. Production of attrition - resistant catalyst binders through use of delaminated clay [P]. US:5288739,1994 -2 -22.
  • 7Demmel; Edward J. Method for producing attrition - resistant catalyst binders[P]. US:5190902,1993 - 3 - 2.
  • 8李军,张秀成,姚铁军,霍尚义.抗水合氧化铝载体研究进展[J].工业催化,2003,11(8):48-52. 被引量:22
  • 9李应成,岳斌,杨为民,谢在库,陈庆龄,闫世润,贺鹤勇.铌酸/氧化铌在多相催化反应中的应用[J].化学通报,2005,68(3):172-178. 被引量:18
  • 10薛传薪.铌氧化物的催化效应[J].化学通报,1993(1):39-42. 被引量:1

二级参考文献70

共引文献107

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部